PCIe adapter placement rules and slot priorities for the 8286-41A or 8286-42A
Find information about the placement rules and slot priorities for the Peripheral Component Interconnect (PCI) Express (PCIe) adapters that are supported for the 8286-41A or 8286-42A system.
PCIe slot descriptions for the 8286-41A and 8286-42A
The 8286-41A and 8286-42A system provides PCIe generation 3 slots. Table 1 provides information about the PCIe slots in the 8286-41A system that has a single POWER8® processor module and the 8286-42A system which offers both a single POWER8 processor module or two POWER8 processor modules. The PCIe slots are enabled to support the PCIe3 cable adapter (FC EJ08) that is used to attach the EMX0 PCIe Gen3 I/O expansion drawer.
Slot | Adapter size | Slot availability in | |
---|---|---|---|
8286-41A or 8286-42A (1 processor) |
8286-42A (2 processors) |
||
PCIe3 x16 | Full-height, full-length | 2 slots (P1-C6 and P1-C7) | 4 slots (P1-C3, P1-C5, P1-C6, and P1-C7) |
PCIe3 x8 | Full-height, half-length or short (low-profile) | 5 slots (P1-C8, P1-C9, P1-C10, P1-C11, and P1-C12) | 7 slots (P1-C2, P1-C4, P1-C8, P1-C9, P1-C10, P1-C11, and P1-C12) |
- PCIe slots
- Embedded PCIe local area network (LAN) controller
- PCIe3 internal SAS controller
- PCIe3 USB controller
- PCIe3 Switch 1 that provides PCIe buses from Processor Module 1, Chip-0.
- PCIe3 Switch 2 that provides PCIe buses from Processor Module 1, Chip-1.
Features provided | PCIe3 Switch 1 | PCIe3 Switch 2 |
---|---|---|
Lanes and ports | 32-lane, 8-ports PCIe Gen3 | 48-lane, 12-ports PCIe Gen3 |
With integrated 8.0 gigatransfers per second (GTps) Serializer/Deserializer (SerDes) speed negotiation, for each port | ||
Lane and polarity reversal | Supported | Supported |
All ports support concurrent maintenance through I2C bus | Yes | Yes |
End-to-end cyclic redundancy check (CRC) and Poison bit error checking | Supported | Supported |
Data path parity | Supported | Supported |
Memory error correction | Supported | Supported |
Advanced error reporting | Supported | Supported |
Aggregate full duplex bandwidth | 512 GT/s | 768 GT/s |
Designate any port as the Upstream port | Yes | Yes |
27x27 mm, 676-pin FCBGA package | Yes | Yes |
Power consumption |
|
|
Figure 1 and Figure 2 shows the rear view of the system with the location codes for the PCIe adapter slots.
Table 3 lists the PCIe adapter slot locations and details for the 8286-41A and 8286-42A system.
Slot | Location code |
Description | PHB | Adapter size |
Slot capabilities | Slot availability in | ||||
---|---|---|---|---|---|---|---|---|---|---|
CAPI | SR-IOV | Dynamic direct memory access (DMA) window | I/O adapter enlarged capacity assign order3 | 8286-41A or 8286-42A (1 processor) |
8286-42A (2 processors) |
|||||
Slot 1 | P1-C21, 6 | PCIe3, x8 | Processor Module 2, Chip-1, PHB1 | Full-height, half-length or Short (low-profile) | No | Yes | Yes | 5 | No | Yes |
Slot 2 | P1-C31 | PCIe3 x16 | Processor Module 2, Chip-1, PHB0 | Full-height, full-length | Yes | Yes | Yes | 9 | No | Yes |
Slot 3 | P1-C41, 6 | PCIe3 x8 | Processor Module 2, Chip-0, PHB1 | Full-height, half-length or Short (low-profile) | No | Yes | Yes | 6 | No | Yes |
Slot 4 | P1-C51 | PCIe3 x16 | Processor Module 2, Chip-0, PHB0 | Full-height, full-length | Yes | Yes | Yes | 11 | No | Yes |
Slot 5 | P1-C61 | PCIe3 x16 | Processor Module 1, Chip-1, PHB0 | Full-height, full-length | Yes | Yes | Yes | Default | Yes | Yes |
Slot 6 | P1-C71 | PCIe3 x16 | Processor Module 1, Chip-0, PHB0 | Full-height, full-length | Yes | Yes | Yes | Default | Yes | Yes |
Slot 7 | P1-C82 | PCIe3 x8 | PCIe3 Switch 2, S2P16 | Full-height, half-length or Short (low-profile) | No | No | Yes | 5, 104 | Yes | Yes |
Slot 8 | P1-C92 | PCIe3 x8 | PCIe3 Switch 2, S2P17 | Full-height, half-length or Short (low-profile) | No | No | Yes | 6, 85 | Yes | Yes |
Slot 9 | P1-C102, 6 | PCIe3 x8 | PCIe3 Switch 2, S1P9 | Full-height, half-length or Short (low-profile) | No | Yes | Yes | Default | Dedicated slot for the LAN adapter | |
Slot 10 | P1-C112 | PCIe3 x8 | PCIe3 Switch 1, S0P1 | Full-height, half-length or Short (low-profile) | No | No | Yes | 7 | Yes | Yes |
Slot 11 | P1-C122, 6 | PCIe3 x8 | PCIe3 Switch 1, S1P9 | Full-height, half-length or Short (low-profile) | No | Yes | Yes | Default | Yes | Yes |
1Slot is a direct slot from the Processor Module and is a high-performance slot. The connectors in these slots are differently colored than the slots from the PCIe3 switches. 2Slot connected by the PCIe3 switches. 3Assigned PCIe slot order when the I/O Adapter Enlarged Capacity option is enabled.
For example, if the option was enabled with a value of 5 on a two processor system, five slots
(P1-C6, P1-C7, P1-C10, P1-C12, and P1-C2) are enabled with the I/O enlarged capacity. If the option
was enabled with a value of 6 on a two processor system, then six slots (P1-C6, P1-C7, P1-C10,
P1-C12, P1-C2, and P1-C4) are enabled with the I/O enlarged capacity, and so on.
Note: Enabling the
I/O Adapter Enlarged Capacity option will only affect Linux partitions. If your system does not have
Linux partitions, the I/O Adapter Enlarged Capacity setting should be disabled.
4The I/O Adapter Enlarged Capacity assignment order value is 5 for one processor or 10 for two processors. 5The I/O Adapter Enlarged Capacity assignment order value is 6 for one processor or 8 for two processors. 6For platforms with less than 64GB of total system memory, SR-IOV should not be configured in these slots as performance may be severely impacted.
|
PCIe adapters placement rules
- IBM Manufacturing requires the slot P1-C10 to hold a local area network adapter (LAN) adapter to install and test the server. One LAN feature code (5899, EN0H, EN0K, EN0M, EN0S, EN0U, EN0W, EN15, or EN17 for systems running AIX® or Linux; 5899, EN15, or EN17 for systems running IBM® i) should be selected for this purpose. IBM will ship the LAN adapter in the P1-C10 slot. The client can move this LAN adapter to a different slot and can use P1-C10 for different adapters if appropriate. The following tables assume the LAN adapter remains in the P1-C10 slot.
- The PCIe3 cable adapter (FC EJ08) is supported in slots P1-C3 (Slot 2), P1-C6 (Slot 5), P1-C5 (Slot 4), and P1-C7 (Slot 6).
- Slots P1-C3, P1-C5, P1-C6, and P1-C7 are x16 slots with busses direct from the Processor Modules and can be used to install high-performance PCIe adapters. The adapter priority for these slots is for the FC EJ12 (FPGA Accelerator), then for the high-performance adapters, followed by any other adapter.
- CAPI accelerator adapters are supported in slots P1-C6, P1-C7, P1-C3, and P1-C5.
- Slots P1-C2 and P1-C4 are x8 slots with busses direct from the Processor Modules and can be used to install high-performance PCIe adapters. The adapter priority for these slots is for the high-performance adapters followed by any other adapter.
- Slots P1-C2, P1-C3, P1-C4, P1-C5, P1-C6, and P1-C7 are slots with busses direct from the Processor Modules and can be used to install high-performance PCIe adapters that support the Single Root IO Virtualization (SRIOV) function.
- FCs 5287 and 5901 are not supported in the slots P1-C8, P1-C9, P1-C10, P1-C11, and P1-C12.
- PCIe internal slots P1-C14 and P1-C15 are used to install the SAS RAID adapter FC EJ0S and the high-performance internal SAS RAID adapter (CCIN 57D8).
- When the internal SAS RAID adapter (CCIN 57D8) is installed in an expanded function system and if the FC EJ0Z is installed in the PCIe slot P1-C11, slot P1-C11 is not available for installing any other PCIe adapter.
Verify whether the adapter is supported for your system. For details about the supported adapters, see PCI adapter information by feature type for the 8247-42L, 8286-41A, or 8286-42A.
The 8286-42A system can have one or two system processor modules. The PCIe slot configuration in the 8286-42A system with a single processor module is the same as in the 8286-41A system.
Feature code | Description | 8286-41A or 8286-42A (1 processor) |
8286-42A1 (2 processors) |
||
---|---|---|---|---|---|
Slot priorities | Maximum number of adapters supported | Slot priorities | Maximum number of adapters supported | ||
2893 and 2894 | PCI Express 2-Line WAN with Modem
(FC 2893 and FC 2894; CCIN 576C); Adapter FRU number: 44V5323
OS support: IBM i and Linux operating systems |
102, 8, 5, 6 | 4 | 102, 8, 1, 3, 2, 4, 5, 6 | 8 |
48075 | PCIe
Cryptographic Coprocessor (FC 4807; CCIN 4765); Adapter FRU number:
45D7948
OS support: AIX and IBM i operating systems |
11, 102, 8, 7, 6, 5 | 6 | 1, 11, 3, 102, 8, 7, 6, 2, 5, 4 | 10 |
5285 | PCIe2
2-port 4X InfiniBand QDR Adapter (FC 5285; CCIN 58E2); Adapter FRU
number: 74Y2987
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
52873 | PCIe2
2-port 10 GbE SR Adapter (FC 5287; CCIN 5287); Adapter FRU number:
74Y3457
|
5, 6 | 2 | 5, 2, 6, 4 | 4 |
5289 | PCIe
2-port Async EIA-232 PCIe 1X LPC Adapter (FC 5289; CCIN 57D4); Adapter
FRU number: 74Y4084
|
6, 5, 7, 8, 101, 11 | 6 | 6, 5, 7, 8, 101, 11 | 10 |
5708 | PCIe
10 Gb FCoE 2-port Adapter (FC 5708; CCIN 2B3B)
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
5717 | 4-port
10/100/1000 Base-TX PCI Express Adapter
(FC 5717; CCIN 5217); Adapter FRU number: 46Y3512
|
11, 102, 8, 7, 6, 5 | 6 | 1, 11, 3, 102, 8, 7, 6, 2, 5, 4 | 10 |
5729 | PCIe2
FH 4-port 8 Gb74Y3467 Fibre Channel Adapter (FC 5729; CCIN 5729);
Adapter FRU number: 74Y3467
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
5735 | 8 Gb PCI Express Dual-port Fibre Channel
Adapter (FC 5735; CCIN 577D); Adapter FRU number: 10N9824
|
11, 102, 8, 7, 6, 5 | 6 | 1, 11, 3, 102, 8, 7, 6, 2, 5, 4 | 10 |
5744 | PCIe2
2x10 GbE SR 2x1 GbE UTP Adapter (FC 5744; CCIN 2B44); Adapter FRU
number: 74Y1987
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
5748 | POWER® GXT145 PCI Express Graphics Accelerator (FC
5748; CCIN 5748); Adapter FRU number: 10N7756
|
102, 8, 5, 6 | 4 | 102, 8, 1, 3, 2, 4, 5, 6 | 8 |
5767 | 2-port
10/100/1000 Base-TX Ethernet PCI Express Adapter (FC 5767;
CCIN 5767); Adapter FRU number: 46K6601
|
11, 102, 8, 7, 6, 5 | 6 | 1, 11, 3, 102, 8, 7, 6, 2, 5, 4 | 10 |
5768 | 2-port
Gigabit Ethernet-SX PCI Express Adapter
(FC 5768; CCIN 5768); Adapter FRU number: 10N6846
|
11, 102, 8, 7, 6, 5 | 6 | 1, 11, 3, 102, 8, 7, 6, 2, 5, 4 | 10 |
5769 | 10 Gb
Ethernet-SR PCI Express Adapter
(FC 5769; CCIN 5769); Adapter FRU number: 46K7897
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
5772 | 10 Gb
Ethernet-LR PCI Express Adapter
(FC 5772; CCIN 576E); Adapter FRU number: 10N9034
|
11, 102, 8, 7, 6, 5 | 6 | 1, 11, 3, 102, 8, 7, 6, 2, 5, 4 | 10 |
5774 | 4 Gb PCI Express Dual-port Fibre Channel
Adapter (FC 5774; CCIN 5774); Adapter FRU number: 10N7255
|
11, 102, 8, 7, 6, 5 | 6 | 1, 11, 3, 102, 8, 7, 6, 2, 5, 4 | 10 |
5785 | 4-port Async EIA-232
PCIe Adapter (FC 5785; CCIN 57D2); Adapter FRU number: 46K6734
|
102, 8, 5, 6 | 4 | 102, 8, 1, 3, 2, 4, 5, 6 | 8 |
5805 | PCIe
380 MB Cache Dual - x4 3 Gb SAS RAID Adapter (FC 5805; CCIN 574E);
Adapter FRU number: 46K4735
|
6, 5 | 2 | 6, 2, 5, 4 | 4 |
5899 | PCIe2
4-port 1 GbE Adapter (FC 5899; CCIN 576F); Adapter FRU number: 74Y4064
OS support:
|
9, 11, 102, 8, 7, 6, 5 | 7 | 9, 2, 11, 3, 102, 8, 7, 6, 5, 4 | 10 |
59013 | PCIe
Dual - x4 SAS Adapter (FC 5901; CCIN 57B3); Adapter FRU number: 44V4852
|
6, 5 | 2 | 6, 2, 5, 4 | 4 |
5913 | PCIe2
1.8 GB Cache RAID SAS Tri-port 6 Gb Adapter (FC 5913; CCIN 57B5);
Adapter FRU number: 00J0596
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
EC28 | PCIe2
2-port 10 GbE RoCE SFP+ adapter (FC EC28; CCIN EC27); Adapter FRU
number: 000E1491
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
EC2J | PCIe
2-Port 10 GbE SFN6122F Adapter (FC EC2J; CCIN EC2G); Adapter FRU number:
00E8224
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
EC2N | PCIe3 2-port 10 GbE
NIC and RoCE SR adapter (FC EC2N; CCIN 57BE); Adapter FRU
number: 00RX875
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
EC30 | PCIe2 FH 2-port 10 GbE
RoCE SR adapter (FC EC30; CCIN EC29); Adapter FRU number: 00E1601
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
EC33 | PCIe3 2-port 56 Gb FDR
IB Adapter x16 (FC EC33; CCIN 2CE7); Adapter FRU number: 00RX852
|
5, 6 | 2 | 5, 2, 6, 4 | 4 |
EC38 | PCIe3 2-port 10 GbE
NIC and RoCE SFP+ Copper Adapter (FC EC38; CCIN 57BC); Adapter
FRU number: 00RX859
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
EC3B | PCIe3 2-Port 40 GbE NIC RoCE QSFP+ Adapter (FC
EC3B; CCIN 57BD); Adapter FRU number: 00FW105
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
EC3F | PCIe3 2-port 100 Gb EDR IB Adapter x16 (FC
EC3E and EC3F; CCIN 2CEA); Adapter FRU number:
00WT075
|
5, 6 | 2 | 5, 2, 6, 4 | 4 |
EC3U | PCIe3 1-port 100 Gb EDR
Infiniband Adapter x16 (FC EC3U; CCIN 2CEB) Adapter FRU number: 00WT013
|
5, 6 | 2 | 5, 2, 6, 4 | 4 |
EC3M | PCIe3
2-port 100 GbE (NIC and RoCE) QSFP28 Adapter (FC EC3L and EC3M; CCIN 2CEC); Adapter FRU
number: 00WT078
|
5, 6 | 2 | 5, 2, 6, 4 | 4 |
EC42 | PCIe2 3D Graphics Adapter
x1 (FC EC42); Adapter FRU number: 00E3980
|
11, 102, 8, 7, 6, 5 | 6 | 1, 11, 3, 102, 8, 7, 6, 2, 5, 4 | 10 |
EC46 | PCIe2
4-port USB 3.0 Adapter (FC EC46; CCIN 58F9); Adapter FRU number: 00E2932
|
11, 102, 8, 7, 6, 5 | 6 | 1, 11, 3, 102, 8, 7, 6, 2, 5, 4 | 10 |
EC55 | PCIe3 1.6 TB NVMe Flash Adapter (FC EC54 and EC55; CCIN
58CB); Adapter FRU number: 00MH991
|
5, 6, 7, 102, 8, 11 | 6 | 1, 2, 3, 4, 5, 6, 7, 10 | 8 |
EC57 | PCIe3 3.2 TB NVMe Flash Adapter
(FC EC56 and EC57; CCIN 58CC); Adapter FRU number: 00MH993
|
5, 6, 7, 102, 8, 11 | 6 | 1, 2, 3, 4, 5, 6, 7, 10 | 8 |
EJ08 | PCIe3 cable adapter that
is used to connect your system to the EMX0 PCIe3 expansion drawer (FC EJ08; CCIN
2CE2); Adapter FRU number: 041T9901
|
5, 6 | 2 | 5, 2, 6, 4 | 4 |
EJ0J | PCIe3 RAID SAS quad-port
6 Gb Adapter (FC EJ0J; CCIN 57B4); Adapter FRU number: 000FX846
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
EJ0L | PCIe3 12 GB Cache RAID
SAS quad-port 6 Gb Adapter (FC EJ0L; CCIN 57CE); Adapter
FRU number: 00FX840
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
EJ0Z | SAS ports and cabling for dual
IOA backplane
|
10 | 1 | 10 | 1 |
EJ10 | PCIe3 4 x8 SAS Port
Adapter (FC EJ10; CCIN 57B4); Adapter FRU number: 00RR793 for 8408-44E or 8408-E8E and
00MH959 for all other machine type models
|
11, 102, 8, 7, 6, 5 | 6 | 1, 11, 3, 102, 8, 7, 6, 2, 5, 4 | 10 |
EJ124 | PCIe3 FPGA Compression Accelerator Adapter (FC EJ12; CCIN
59AB); Adapter FRU number: 000NK006
|
5, 6 | 2 | 1, 3, 5, 2, 6, 4 | 4 |
EJ144 | PCIe3
12 GB Cache RAID PLUS SAS Adapter Quad-port 6 Gb x8 (FC EJ14; CCIN
57B1); Adapter FRU number 01DH742
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
EJ174 | PCIe3 CAPI FlashSystem
Accelerator Adapter (FC EJ17); Adapter FRU number: 00NK025
|
5, 6 | 2 | 5, 2, 6, 4 | 2 |
EJ1P | PCIe1 SAS Tape/DVD Dual-port 3 Gb x8 Adapter (FC EJ1P and
EJ1N; CCIN 57B3); Adapter FRU:44V4852
|
6, 5 | 2 | 6, 2, 5, 4 | 4 |
EJ275 | PCIe
Cryptographic Coprocessor (FC EJ27; CCIN 4765); Adapter FRU number:
45D7948
|
11, 102, 8, 7, 6, 5 | 6 | 1, 11, 3, 102, 8, 7, 6, 2, 5, 4 | 10 |
EJ32 | 4767-001 Cryptographic Coprocessor (FC EJ32 and EJ33; CCIN
4767)
|
11, 102, 8, 7, 6, 5 | 6 | 11, 8, 102, 7, 3, 1, 4, 6, 2, 5 | 10 |
EL4L | PCIe2 4-port 1 GbE Adapter
(FC EL4L and EL4M; CCIN 576F); Adapter FRU number: 74Y4064
|
9, 11, 102, 8, 7, 6, 5 | 7 | 9, 1, 11, 3, 102, 8, 7, 6, 5, 4 | 10 |
EL58 | 8 Gb PCI Express Dual-port Fibre Channel
Adapter (FC EL58; CCIN 577D); Adapter FRU number: 10N9824
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
EL5B | PCIe3 16 Gb 2-port Fibre
Channel Adapter (FC EL5B; CCIN 577F); Adapter FRU number: 00E3496
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
EN0A | PCIe3 16 Gb
2-port Fibre Channel Adapter (FC EN0A; CCIN 577F); Adapter FRU number: 00E3496
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
EN0G | PCIe2 8Gb 2-Port Fibre Channel
Adapter (FC EN0F and EN0G; CCIN 578D); Adapter FRU number: 00WT111
|
5, 6, 8, 102, 11, 7 | 6 | 5, 2, 6, 4, 1, 8, 102, 11, 3, 7 | 10 |
EN0H | PCIe3
4-port (2x10 Gb FCoE, 2x1 GbE) SFP+ Adapter (FC EN0H; CCIN 2B93); Adapter FRU number: 00E3498
|
9, 5, 6, 7, 8, 102, 11 | 7 | 9, 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 11 |
EN0K | PCIe3 4-port (10 Gb FCoE and 1 GbE) Copper and RJ45 Adapter
(FC EN0K; CCIN 2CC1); Adapter FRU number: 00E8140
|
9, 5, 6, 7, 8, 102, 11 | 7 | 9, 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 11 |
EN0M | PCIe3 4-port (10 Gb FCoE and 1 GbE) LR and RJ45 Adapter (FC
EN0M; CCIN 2CC0); Adapter FRU number: 00E8144
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
EN0S | PCIe2 4-port (10 Gb + 1 GbE)
SR+RJ45 Adapter (FC EN0S; CCIN 2CC3); Adapter FRU number: 00E2715;
Part number (Full-height tailstock): 00E2863; Part number (Low-profile
tailstock): 00E2720
|
9, 5, 6, 7, 8, 102, 11 | 7 | 9, 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 11 |
EN0U | PCIe2
4-port (10 Gb + 1 GbE) Copper SFP+RJ45 Adapter (FC EN0U; CCIN 2CC3);
Adapter FRU number: 00E2715; low-profile tailstock: 00E2720
|
9, 5, 6, 7, 8, 102, 11 | 7 | 9, 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 11 |
EN0W | PCIe2
2-port 10 GbE BaseT RJ45 Adapter (FC EN0W; CCIN 2CC4); Adapter FRU number: 00E2714
|
9, 5, 6, 7, 8, 102, 11 | 7 | 9, 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 11 |
EN12 | PCIe2 FH 4-port 8 Gb Fibre Channel Adapter (FC
EN12; CCIN EN0Y); Adapter FRU number 00WT107
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
EN13 and EN14 | PCIe Binary Synchronous
Adapter (FC EN13 and FC EN14; CCIN 576C)
OS support: IBM i operating system |
102, 8, 5, 6 | 4 | 102, 8, 1, 3, 2, 4, 5, 6 | 8 |
EN15 | PCIe3
4-port 10 GbE SR Adapter (FC EN15; CCIN 2CE3); Adapter FRU number:
00ND466; full-height tailstock: 00ND462
|
9, 5, 6, 7, 8, 102, 11 | 7 | 9, 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 11 |
EN17 | PCIe3
4-port 10 GbE SFP+ Copper Adapter (FC EN17, CCIN 2CE4); Adapter FRU
number: 00ND463; full-height tailstock part number: 00ND465
|
9, 5, 6, 7, 8, 102, 11 | 7 | 9, 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 11 |
EN27 | PCIe
2-port Async EIA-232 Adapter (FC EN27; CCIN 57D4); Adapter FRU number:
000ND487
|
11, 102, 8, 7, 6, 5 | 6 | 1, 11, 3, 102, 8, 7, 6, 2, 5, 4 | 10 |
EN29 | PCIe 2-port Async EIA-232 LP
Adapter (FC EN29; CCIN 57D4); adapter FRU number 000ND487
|
11, 102, 8, 7, 6, 5 | 6 | 1, 11, 3, 102, 8, 7, 6, 2, 5, 4 | 10 |
ESA3 | PCIe2
1.8 GB Cache RAID SAS Adapter Tri-port 6 Gb (FC ESA3; CCIN 57BB);
Adapter FRU number: 74Y7131
|
5, 6, 7, 8, 102, 11 | 6 | 5, 2, 6, 4, 7, 1, 8, 3, 102, 11 | 10 |
1The PCIe slot priorities are for the 8286-42A system with two processor modules, while the slot priorities for the 8286-42A system with a single processor module is the same as for the 8286-41A system. 2The slot is not available to install other adapters in the expanded function system with the FC EJ0Z installed in this slot. 3The adapters FC 5901 and 5287 are not supported in slots 7, 8, 9, 10, and 11. 4 The adapters FC EJ16, EJ17, and EJ18 are not compatible with the adapters FC EJ12 and EJ13. The FC EJ12 and EJ13 adapters are for gzip compression offload, and the FC EJ16, EJ17 and EJ18 are for direct-attach fibre channel flash acceleration. 5The PCIe Cryptographic Coprocessor must not have any other adapter installed in a slot that is adjacent to it for thermal and cooling reasons. Installing an adapter adjacent to the PCIe Cryptographic Coprocessor invalidates the product warranty.The PCIe Cryptographic Coprocessor can be installed in an end slot, which requires a total of two slots that are adjacent. Otherwise, a total of three slots that are adjacent is required. |