7063-CR1 locations
Use this information to find the location of a field-replaceable unit (FRU) in the system unit.
Rack views
The following diagrams show FRU layouts in the system. Use these diagrams with the following tables.
Figure 1. Front view
| Index number | FRU description | FRU removal and replacement procedures |
|---|---|---|
| 1 | HDD 0 | See Removing and replacing a storage drive in the 7063-CR1. |
| 2 | HDD 1 | |
| 3 | USB cable and connectors | See Removing and replacing the USB cable and connectors in the 7063-CR1. Note: Your 7063-CR1 might include a front serial
port; however, this port is not supported.
|
Figure 2. Top view
Figure 3. Rear view
| Index number | FRU description | FRU removal and replacement procedures |
|---|---|---|
| 16 | PSU 1 | See Removing and replacing a power supply in the 7063-CR1. |
| 17 | PSU 2 | See Removing and replacing a power supply in the 7063-CR1. |
| 18 | PCIe adapter (UIO Network) | See Removing and replacing PCIe adapters in the 7063-CR1. |
Memory locations
The following diagram shows memory DIMMs and their corresponding field-replaceable unit (FRU) layouts in the system. Use this diagram with the following table.
Figure 4. Memory locations
The following table provides the memory locations.
| Index number | FRU description | FRU removal and replacement procedures |
|---|---|---|
| 19 | P1M1-DIMMA | See Removing and replacing memory in the 7063-CR1. |
| 20 | P1M1-DIMMB | |
| 21 | P1M2-DIMMA | |
| 22 | P1M2-DIMMB |
