PREPARE (Create a recovery plan file)

You can use the QUERY ACTLOG command to view whether the PREPARE command was successful.

You can also view this information from the server console or, if the WAIT parameter equals YES, an administrative client session.

Privilege class

To issue this command, you must have system privilege.

Parameters

Source

Specifies the type of database backup series that Tivoli Storage Manager assumes when generating the recovery plan file. This parameter is optional. The default is DBBACKUP. The choices are:

DBBackup

Specifies that Tivoli Storage Manager assumes the latest full database backup series.

DBSnapshot

Specifies that Tivoli Storage Manager assumes the latest database snapshot backup series.

DEVclass

Specifies the device class name that is used to create a recovery plan file object on a target server. The device class must have a device type of SERVER.

Important: The maximum capacity for the device class must be larger than the size of the recovery plan file. If the size of the recovery plan file exceeds the maximum capacity, the command fails.

The naming convention for the archive object that contains the recovery plan file on the target server is:

• Filespace name:
  • ADSM.SERVER
• High-level qualifier:
  • devclassprefix/servername.yyyymmdd.hhmmss
  • devclassprefix\servername.yyyymmdd.hhmmss
• Low-level qualifier:
  • RPF.OBJ.1

The recovery plan file virtual volume name as recorded in the volume history table on the source server is in the format servername.yyyymmdd.hhmmss.

If the DEVCLASS parameter is not specified, the recovery plan file is written to a file based on the plan prefix.

If SOURCE=DBBACKUP is specified or is defaulted to, the volume history entry for the recovery plan file object specifies a volume type of RPFILE. If SOURCE=DBSNAPSHOT is specified, the volume history entry specifies a volume type of RPFSNAPSHOT.

PLANPrefix

Specifies the path name prefix that is used in the recovery plan file name. This parameter is optional.

• The maximum length is 250 characters.
• The maximum length is 200 characters.

Specifies the path name prefix that is used in the recovery plan file name.

Tivoli Storage Manager appends to the prefix the sortable date and time format yyyymmdd.hhmmss. For example: 20081115.051421.

The prefix can be one of the following:

Directory path

End the prefix with the forward slash (/). For example:

PLANPREFIX=/adsmsrv/recplans/

The resulting file name would look like this:

/adsmsrv/recplans/20081115.051421

Directory path followed by a string

Tivoli Storage Manager treats the string as part of the file name. For example:

PLANPREFIX=/adsmsrv/recplans/accounting

The resulting file name looks like this:

/adsmsrv/recplans/accounting.20081115.051421

Note the period before the date and time.

String only

Tivoli Storage Manager specifies the directory path. Tivoli Storage Manager uses the name of the current working directory. For example, the current working directory is /opt/tivoli/tsm/server/bin and you specify the following parameter:

PLANPREFIX=shipping

The resulting file name looks like this:

/opt/tivoli/tsm/server/bin/shipping.20081115.051421

Note the period before the date and time.

The prefix can be one of the following:

Directory path

End the prefix with the back slash (\). For example:

PLANPREFIX=c:\adsmsrv\recplans\

The resulting file name looks like this:

c:\adsmsrv\recplans\20081115.051421

Tip: If you issue the PREPARE command from the Tivoli Storage Manager administrative command line client and the last character in the command line is a back slash, it is interpreted as a continuation character. To avoid this, place the prefix value in double quotation marks. For example:

PLANPREFIX="c:\adsmsrv\recplans\"

Directory path followed by a string

Tivoli Storage Manager treats the string as part of the file name. For example:

PLANPREFIX=c:\adsmsrv\recplans\accounting

The resulting file name looks like this:

c:\adsmsrv\recplans\accounting.20081115.051421

Note the period before the date and time.

String only

Tivoli Storage Manager appends the date and time in the .yyyymmdd.hhmmss format (note the period before the date and time) to the prefix. The directory path used by the PREPARE command is the directory representing this “instance” of the Tivoli Storage Manager server. Typically, this directory is the original Tivoli Storage Manager server installation directory. For example, the directory representing this instance of the server is c:\Program Files\Tivoli\TSM;\server2 , and you issue a PREPARE command with the following parameter:

PLANPREFIX=shipping

The resulting recovery plan filename is:

c:\Program Files\Tivoli\TSM;\server2\shipping.20081115.051421

If the PLANPREFIX parameter is not specified, Tivoli Storage Manager selects the prefix in one of these ways:

• If the SET DRMPLANPREFIX command has been issued, Tivoli Storage Manager uses the prefix specified in that command.
• If the SET DRMPLANPREFIX command is not defined, Tivoli Storage Manager uses as the path the directory representing this “instance” of the Tivoli Storage Manager server, which is typically the original Tivoli Storage Manager server installation directory. For example, the directory representing this instance of the server is the following:

  c:\Program Files\Tivoli\TSM;\server2

  The resulting recovery plan file name is the following:

  c:\Program Files\Tivoli\TSM;\server2\2008115.051421

• If the SET DRMPLANPREFIX command has not been issued, Tivoli Storage Manager uses the directory path name of the current working directory. For example, the current working directory is the following:

  /opt/tivoli/tsm/server/bin

  The resulting file name looks like this:

  /opt/tivoli/txm/server/bin/20081115.051421

INSTRPrefix

Specifies the prefix of the path name used by Tivoli Storage Manager to locate the files that contain the recovery instructions. The maximum length is 250 200 characters.

Important: The recovery instructions files must be created on a file system that supports long file names.

The prefix can be one of the following:

Directory path

End the prefix with the forward slash (/). For example:

INSTRPREFIX=/adsmsrv/recinstr/

/adsmsrv/recinstr/RECOVERY.INSTRUCTIONS.GENERAL

Directory path followed by a string

Tivoli Storage Manager treats the string as part of the file name. For example:

INSTRPREFIX=/adsmsrv/recinstr/accounts

Tivoli Storage Manager appends the appropriate recovery plan file stanza name. For the RECOVERY.INSTRUCTIONS.GENERAL file, the resulting file name is:

/adsmsrv/recinstr/accounts.RECOVERY.INSTRUCTIONS.GENERAL

String only

• Tivoli Storage Manager specifies the directory path and appends the appropriate recovery plan file stanza name. Tivoli Storage Manager uses the name of the current working directory. For example, the current working directory is /opt/tivoli/tsm/server/bin and you specify the following parameter:

  INSTRPREFIX=shipping

  For the RECOVERY.INSTRUCTIONS.GENERAL file, the resulting file name looks like this:

  /opt/tivoli/tsm/server/bin/shipping.RECOVERY.INSTRUCTIONS.GENERAL 

The prefix can be one of the following:

Directory path

End the prefix with the back slash (\). For example:

INSTRPREFIX=c:\adsmsrv\recinstr\

Tivoli Storage Manager appends the appropriate recovery plan file stanza name. For the RECOVERY.INSTRUCTIONS.GENERAL file, the resulting file name is:

c:\adsmsrv\recinstr\RECOVERY.INSTRUCTIONS.GENERAL

Tip: If you issue the PREPARE command from the Tivoli Storage Manager administrative command line client and the last character in the command line is a back slash, it is interpreted as a continuation character. To avoid this, place the prefix value in double quotation marks. For example:

INSTRPREFIX="c:\adsmserv\recinstr\"

Directory path followed by a string

Tivoli Storage Manager treats the string as part of the file name. For example:

INSTRPREFIX=c:\adsmsrv\recinstr\accounts

Tivoli Storage Manager appends the appropriate recovery plan file stanza name. For the RECOVERY.INSTRUCTIONS.GENERAL file, the resulting file name is:

c:\adsmsrv\recinstr\accounts.RECOVERY.INSTRUCTIONS.GENERAL

String only

Tivoli Storage Manager specifies the directory path and appends the appropriate recovery plan file stanza name. Tivoli Storage Manager appends the recovery plan file stanza name to the prefix. If the prefix is only a string, the directory path used by the PREPARE command is the directory representing this instance of the Tivoli Storage Manager server. This is typically the original Tivoli Storage Manager server installation directory. For example, the directory representing this instance of the server is c:\Program Files\Tivoli\TSM;\server2, and you issue a PREPARE command with the following parameter:

INSTRPREFIX=dock

The resulting recovery plan filename is:

c:\Program Files\Tivoli\TSM;\server2\shipping.20081115.051421

If you do not specify the INSTRPREFIX parameter, Tivoli Storage Manager selects the prefix in one of these ways:

• If the SET DRMINSTRPREFIX command has been issued, Tivoli Storage Manager uses the prefix specified in that command.
• If the SET DRMINSTRPREFIX command has not been issued, Tivoli Storage Manager uses as the path the directory representing this “instance” of the Tivoli Storage Manager server, which is typically the original Tivoli Storage Manager server installation directory. For example, the directory representing this instance of the server is the following:

  c:\Program Files\Tivoli\TSM;\server2

  The resulting recovery plan file name is the following:

  c:\Program Files\Tivoli\TSM;\server2\RECOVERY.INSTRUCTIONS.GENERAL

• If the SET DRMINSTRPREFIX command has not been issued, Tivoli Storage Manager uses the current working directory.
  For example, if the current working directory is /opt/tivoli/tsm/server/bin, for the RECOVERY.INSTRUCTIONS.GENERAL file, the resulting file name would be:

  /opt/tivoli/tsm/server/bin/RECOVERY.INSTRUCTIONS.GENERAL

PRIMstgpool

Specifies the names of the primary storage pools that you want to restore. Separate the storage pool names with commas and no intervening spaces. You can use wildcard characters. If this parameter is not specified, Tivoli Storage Manager selects the storage pools as follows:

• If the SET DRMPRIMSTGPOOL command has been issued, Tivoli Storage Manager includes the primary storage pools named in that command.
• If the SET DRMPRIMSTGPOOL command has not been issued, Tivoli Storage Manager includes all the primary storage pools.

COPYstgpool

Specifies the names of the copy storage pools used to back up the primary storage pools that you want to restore (see the PRIMSTGPOOL parameter). Separate storage pool names with commas and no intervening spaces. You can use wildcard characters. If this parameter is not specified, Tivoli Storage Manager selects the storage pools as follows:

• If the SET DRMCOPYSTGPOOL command has been issued, Tivoli Storage Manager includes those copy storage pools.
• If the SET DRMCOPYSTGPOOL command has not been issued, Tivoli Storage Manager includes all copy storage pools.

ACTIVEDatastgpool

Specifies the names of the active-data storage pools that you want to have available for offsite access. Separate active-data storage-pool names with commas and no intervening spaces. You can use wildcard characters. If this parameter is not specified, Tivoli Storage Manager selects the storage pools as follows:

• If the SET ACTIVEDATASTGPOOL command has been previously issued with valid active-data storage pool names, Tivoli Storage Manager processes those storage pools.
• If the SET ACTIVEDATASTGPOOL command has not been issued, or all of the active-data storage pools have been removed using the SET ACTIVEDATASTGPOOL command, Tivoli Storage Manager processes only the active-data pool volumes that were marked on-site at the time the PREPARE command is run. Tivoli Storage Manager will mark these volumes as UNAVAILABLE.

Wait

Specifies whether this command is processed in the background or foreground.

No

Specifies background processing. This is the default.

Yes

Specifies foreground processing.

You cannot specify YES from the server console.

Related commands