Open Systems Adapter/Support Facility on Hardware Management Console Migration Guide
Previous topic | Next topic | Contents | Contact z/OS | Library | PDF


Configuration error and warning messages

Open Systems Adapter/Support Facility on Hardware Management Console Migration Guide
SC14-7580-00

OSA/SF displays configuration errors and warnings with the following window:
Figure 1. Errors and warnings window
Errors and warnings window

A non-zero return code value between 1 and 999 is a warning. Warning messages do not prevent a configuration from being activated. A return code of 1000 or greater is an error and must be fixed prior to activating the configuration. The entire file is parsed to find errors, but only the first one is displayed on this window. The remainder of this chapter is a list of errors and warnings that may be detected in the OSA configuration file.

Table 1. Warning and error codes
Code Text/User Action
Warnings
176 Text: This IP address is already in use.
User Action: Verify your IP addresses.
212 Text: The Inactivity Timer has been rounded off to the nearest 0.12 seconds.
User Action: None.
214 Text: It is recommended that the Inactivity timer is set to a value at least 5 times greater than the response timer.
User Action: Verify your settings.
222 Text: The Response Timer has been rounded off to the nearest 0.20 seconds.
User Action: None.
224 Text: It is recommended that the Response timer is set to a value greater than or equal to the Acknowledgement Timer.
User Action: Verify your settings.
232 Text: The Acknowledgement Timer has been rounded off to nearest 0.08 seconds.
User Action: None.
244 Text: It is recommended that the Max I frame is set to a value greater than Max transmit window size.
User Action: Verify your settings.
318 Text: SNA tags which are not present in the configuration file will be generated and set to the specified default values.
User Action: Verify your settings.
320 Text: Adding default <OSE PORT#> section since at least one SNA OAT entry was defined for this port.
User Action: Verify your settings.
506 Text: The OAT entry cannot be brought on-line because CSS is not defined in the active IOCDS.
User Action: Verify your I/O Definitions.
507 Text: The OAT entry cannot be brought on-line because IID is not defined for CSS in the active IOCDS.
User Action: Verify your I/O Definitions.
508 Text: The OAT entry cannot be brought on-line because Device is not defined for IID in the active IOCDS.
User Action: Verify your I/O Definitions.
509 Text: The OAT entry cannot be brought on-line because device is not defined in the active IOCDS.
User Action: Verify your I/O Definitions.
510 Text: The OAT entry cannot be brought on-line because there are no images associated to this CSS in the active IOCDS.
User Action: Verify your I/O Definitions.
600 Text: This warning is generated because the I/O definitions were not found in the Configuration file examined by the validation tool. The most likely reason for this warning is this is the first invocation of the SE based OSA/SF. After a successful activation using this tool, the warning will not be presented again.
Errors
3010 Text: Duplicate CSS/IID/UNIT Address combination.
User Action: Correct definition.
3020 Text: Cannot have multiple <OSE> tags in a file.
User Action: Correct Syntax.
3021 Text: Cannot have <OSE> tag within a <OAT_TABLE> section.
User Action: Correct Syntax.
3022 Text: Cannot have more than one <OSE> section (<OSE>...</OSE>).
User Action: Correct Syntax.
3023 Text: <OSE> tag not valid within a <OSE_PORT#> section.
User Action: Correct Syntax.
3024 Text: </OSE_PORT#> tag position not valid.
User Action: Correct Syntax.
3030 Text: </OSE> tag position not valid.
User Action: Correct Syntax.
3031 Text: <OSE> section must be closed by the </OSE> tag.
User Action: Correct Syntax.
3032 Text: <OAT_TABLE> section has to be closed by a </OAT_TABLE> tag.
User Action: Correct Syntax.
3061 Text: <CSS_IID> section must be closed by a </CSS_IDD> tag.
User Action: Correct Syntax.
3062 Text: </CSS_IID> tag not valid outside <OAT_TABLE> section.
User Action: Correct Syntax.
3063 Text: <CSS_IID> tag not valid outside <OAT_TABLE> section.
User Action: Correct Syntax.
3064 Text: </CSS_IID> section must be closed by a <CSS_IID> tag.
User Action: Correct Syntax.
3065 Text: <CSS_IID> tag not valid inside a <OAT_ENTRY> section.
User Action: Correct Syntax.
3066 Text: Duplicate CSS/IID combination within <CSS_IID> section.
User Action: Correct Syntax.
3067 Text: CSS keyword value missing from <CSS_IID> section.
User Action: Correct Syntax.
3068 Text: IID keyword value missing from <CSS_IID> section.
User Action: Correct Syntax.
3069 Text: <CSS_IID> section must be closed by a </CSS_IID> tag.
User Action: Correct Syntax.
3070 Text: Missing <OATENTRY> tag in <CSS_IID> section.
User Action: Correct Syntax.
3071 Text: CSS keyword value missing before <OATENTRY> section.
User Action: Correct Syntax.
3072 Text: IID keyword value missing before <OATENTRY> section.
User Action: Correct Syntax.
3100 Text: </OAT_TABLE> tag must be within <OSE>,</OSE> tags.
User Action: Correct Syntax.
3101 Text: Duplicate <OAT_TABLE> tags.
User Action: Correct Syntax.
3102 Text: <OAT_TABLE> section has already been defined.
User Action: Correct Syntax.
3110 Text: Incorrect </OAT_TABLE> position.
User Action: Correct Syntax.
3121 Text: <OATENTRY> tag not valid outside of <OAT_TABLE> section.
User Action: Correct Syntax.
3122 Text: <OAT_TABLE> section maximum limit reached. (240 maximum)
User Action: Correct Syntax.
3123 Text: <OATENTRY> must be closed by a </OATENTRY> tag.
User Action: Correct Syntax.
3124 Text: </OATENTRY tag incomplete, missing '>' should be </OATENTRY>.
User Action:
3125 Text: </OATENTRY> section must be opened with a <OATENTRY> tag.
User Action: Correct Syntax.
3126 Text: At least one <OATENTRY> tag must be defined in <OAT_Table> section.
User Action: Correct Syntax.
3127 Text: <OATENTRY> tag not valid outside <CSS_IID> section.
User Action: Correct Syntax.
3128 Text: Missing keyword (RECORD_TYPE, PORT_NUM, or UNIT_ADDR) in <OATENTRY> section.
User Action: Correct Syntax.
3129 Text: Missing </OATENTRY> tag in <OATENTRY> section.
User Action: Correct Syntax.
3130 Text: CSS keyword not valid outside <OAT_TABLE> section.
User Action: Correct Syntax.
3131 Text: CSS keyword not valid inside <OATENTRY> section.
User Action: Correct Syntax.
3132 Text: Incorrect CSS keyword value. Range is [0 - 3].
User Action: Correct Syntax.
3133 Text: CSS keyword not present.
User Action: Correct Syntax.
3134 Text: Only 1 CSS keyword allowed in <CSS_IID> section.
User Action: Correct Syntax.
3135 Text: CSS keyword not valid outside of <CSS_IID> section.
User Action: Correct Syntax.
3136 Text: <CSS_IID> sections need to be ordered in ascending order of CSS.
User Action: Correct Syntax.
3140 Text: IID keyword not valid outside of <OAT_TABLE> section.
User Action: Correct Syntax.
3141 Text: IID keyword not valid inside <OATENTRY> section.
User Action: Correct Syntax.
3142 Text: Incorrect IID keyword value. Range is [0 - F].
User Action: Correct Syntax.
3143 Text: Missing IID keyword value.
User Action: Correct Syntax.
3144 Text: Only 1 IID keyword allowed in <CSS_IID> section.
User Action: Correct Syntax.
3145 Text: IID keyword not valid outside <CSS_IID> section.
User Action: Correct Syntax.
3146 Text: <CSS_IID> sections not in proper ascending order of IID.
User Action: Correct Syntax.
3147 Text: IID keyword should follow CSS keyword in <CSS_IID> section.
User Action: Correct Syntax.
3150 Text: UNIT_ADDR keyword not valid outside <OAT_TABLE> section.
User Action: Correct Syntax.
3151 Text: UNIT_ADDR keyword only valid inside <OATENTRY> section.
User Action: Correct Syntax.
3152 Text: Incorrect UNIT_ADDR keyword value. Range is [00 - FD].
User Action: Correct Syntax.
3153 Text: Missing UNIT_ADDR keyword value.
User Action: Correct Syntax.
3154 Text: Only 1 UNIT_ADDR keyword allowed in <OATENTRY> section.
User Action: Correct Syntax.
3155 Text: UNIT_ADDR keyword value must be even for a TCP/IP record entry.
User Action: Correct Syntax.
3156 Text: RECORD_TYPE keyword must be specified before UNIT_ADDR keyword.
User Action: Correct Syntax.
3157 Text: RECORD_TYPE keyword must be specified before ROUTER_PARM keyword.
User Action: Correct Syntax.
3158 Text: RECORD_TYPE keyword must be specified before IP_ADDRESS keyword.
User Action: Correct Syntax.
3159 Text: PORT_NUM keyword must be specified before IP_ADDRESS keyword.
User Action: Correct Syntax.
3160 Text: PORT_NUM keyword must be specified before ROUTER_PARM keyword.
User Action: Correct Syntax.
3170 Text: IP_ADDRESS keyword not valid outside of <OAT_TABLE> section.
User Action: Correct Syntax.
3171 Text: IP_ADDRESS keyword only valid inside <OATENTRY> section.
User Action: Correct Syntax.
3172 Text: IP address is not valid. Must be n.n.n.n where 0 >= n <= 255 and not equal to 0.0.0.0 and 255.255.255.255.
User Action: Correct Syntax.
3173 Text: Missing IP_ADDRESS keyword value.
User Action: Correct Syntax.
3174 Text: Only 8 IP_ADDRESS keywords may be specified per <OATENTRY> section.
User Action: Correct Syntax.
3175 Text: Router keyword value cannot be PRIMARY/SECONDARY since no IP_ADDRESS tag is defined.
User Action: Correct Syntax.
3176 Text: More than 512 IP ADDRESS keyword specified for a single port.
User Action: Correct Syntax.
3177 Text: Duplicate IP_ADDRESS keyword value within the <OATENTRY> section.
User Action: Correct Syntax.
3178 Text: TCP <OATENTRY> section has invalid group size.
User Action: Correct Syntax.
3179 Text: SNA <OATENTRY> section has invalid group size.
User Action: Correct Syntax.
3180 Text: RECORD_TYPE keyword not valid outside <OATENTRY> section.
User Action: Correct Syntax.
3181 Text: RECORD_TYPE keyword only valid inside <OATENTRY> section.
User Action: Correct Syntax.
3182 Text: Incorrect RECORD_TYPE keyword value.
User Action: Correct Syntax.
3183 Text: Missing RECORD_TYPE keyword value.
User Action: Correct Syntax.
3184 Text: Only 1 RECORD_TYPE keyword allowed in <OATENTRY> section.
User Action: Correct Syntax.
3190 Text: PORT_NUM keyword not valid outside <OAT_TABLE> section.
User Action: Correct Syntax.
3191 Text: PORT_NUM keyword only valid inside <OATENTRY> section.
User Action: Correct Syntax.
3192 Text: PORT_NUM keyword value must be 0 or 1.
User Action: Correct Syntax.
3193 Text: Missing PORT_NUM keyword.
User Action: Correct Syntax.
3194 Text: Only 1 PORT_NUM keyword allowed in <OATENTRY> section.
User Action: Correct Syntax.
3210 Text: INACTIVITY_TIMER keyword not valid outside of <OSE> section.
User Action: Correct Syntax.
3211 Text: INACTIVITY_TIMER keyword only valid outside of <OSE> section.
User Action: Correct Syntax.
3212 Text: INACTIVITY_TIMER keyword value must be in the range of [.24 - 90 seconds] - set to 0 to disable.
User Action: Correct Syntax.
3213 Text: Missing INACTIVIT_TIMER keyword value.
User Action: Correct Syntax.
3214 Text: Only 1 INACTIVITY_TIMER keyword allowed in <OSE_PORT#> section.
User Action: Correct Syntax.
3220 Text: RESPONSE_TIMER keyword not valid outside <OSE> section.
User Action: Correct Syntax.
3221 Text: RESPONSE_TIMER keyword only valid outside <OSE_PORT#> section.
User Action: Correct Syntax.
3222 Text: RESPONSE_TIMER keyword value must be in the range of [.20 - 51 seconds].
User Action: Correct Syntax.
3223 Text: RESPONSE_TIMER keyword value not present.
User Action: Correct Syntax.
3224 Text: Only 1 RESPONSE_TIMER keyword in <OSE_PORT#> section.
User Action: Correct Syntax.
3230 Text: ACK_TIMER not valid outside <OSE> section.
User Action: Correct Syntax.
3231 Text: ACK_TIMER only valid in </OSE_PORT#> section.
User Action: Correct Syntax.
3232 Text: ACK_TIMER keyword value must be in the range of [.08 - 20.40 seconds].
User Action: Correct Syntax.
3233 Text: Missing ACK_TIMER keyword.
User Action: Correct Syntax.
3234 Text: Only 1 ACK_TIMER keyword allowed in <OSE_PORT#> section.
User Action: Correct Syntax.
3240 Text: MAX_I_FRAME keyword not valid outside <OSE> section.
User Action: Correct Syntax.
3241 Text: MAX_I_FRAME keyword only valid inside <OSE_PORT#> section.
User Action: Correct Syntax.
3242 Text: MAX_I_FRAME keyword value must be in the range of [1 - 4].
User Action: Correct Syntax.
3243 Text: Missing MAX_I_FRAME keyword value.
User Action: Correct Syntax.
3244 Text: Only 1 MAX_I_FRAME keyword in <OSE_PORT#> section.
User Action: Correct Syntax.
3250 Text: MAX_XMIT_WIN keyword not valid outside <OSE> section.
User Action: Correct Syntax.
3251 Text: MAX_XMIT_WIN keyword only valid inside <OSE_PORT#> section.
User Action: Correct Syntax.
3252 Text: MAX_XMIT_WIN keyword value must be in the range of [1 - 16].
User Action: Correct Syntax.
3253 Text: Missing MAX_XMIT_WIN keyword value.
User Action: Correct Syntax.
3254 Text: Only 1 MAX_XMIT_WIN keyword allowed in <OSE_PORT#> section.
User Action: Correct Syntax.
3260 Text: ROUTER_PARM keyword not valid outside of <OAT_TABLE> section.
User Action: Correct Syntax.
3261 Text: ROUTER_PARM keyword only valid inside <OATENTRY> section.
User Action: Correct Syntax.
3262 Text: Incorrect ROUTER_PARM keyword value. Valid values are NONE/PRIMARY/SECONDARY.
User Action: Correct Syntax.
3263 Text: Missing ROUTER_PARM keyword value.
User Action: Correct Syntax.
3264 Text: Only 1 ROUTER_PARM keyword allowed in <OATENTRY>.
User Action: Correct Syntax.
3265 Text: Duplicate PRIMARY Router defined for a single port.
User Action: Correct Syntax.
3266 Text: Duplicate SECONDARY Router defined for a single port.
User Action: Correct Syntax.
3270 Text: ROUTER_PARM keyword is not valid in a SNA OAT entry.
User Action: Correct Syntax.
3271 Text: IP_ADDRESS keyword is not valid in a SNA OAT entry.
User Action: Correct Syntax.
3310 Text: </OSE_PORT tag incomplete <OSE_PORT#>.
User Action: Correct Syntax.
3311 Text: <OSE_PORT#> tag not valid outside <OSE> section.
User Action: Correct Syntax.
3312 Text: Incorrect <OSE_PORT#> section value. Must be 0 or 1.
User Action: Correct Syntax.
3313 Text: <OSE_PORT#> sections not ended with </OSE_PORT#>.
User Action: Correct Syntax.
3314 Text: </OSE_PORT# tag incomplete. It should be </OSE_PORT#>.
User Action: Correct Syntax.
3315 Text: Incorrect </OSE_PORT#> section value. Must match value in </OSE_PORT#>.
User Action: Correct Syntax.
3316 Text: Only one instance of a specific <OSE_PORT#> tag may appear in the configuration.
User Action: Correct Syntax.
3317 Text: Incorrect format for <OSE_PORT#> tag port identifier. Needs to be decimal number.
User Action: Correct Syntax.
3319 Text: Missing </OSE_PORT#> tag.
User Action: Correct Syntax.
3320 Text: </OSE_PORT#> tag must be closed by the <OSE_PORT#> tag.
User Action: Correct Syntax.
3321 Text: Missing <OSE_PORT#> section and/or <OATENTRY> section in configuration file.
User Action: Correct Syntax.
3323 Text: <OSE_PORT#> tag not valid inside <OAT_TABLE> section.
User Action: Correct Syntax.
3324 Text: <OSE_PORT#> tag incorrectly repeated.
User Action: Correct Syntax.
3325 Text: Missing values in <OSE_PORT#> section.
User Action: Correct Syntax.
3490 Text: Unrecognized configuration parameter.
User Action: Correct Syntax.

Go to the previous page Go to the next page

Notices | Terms of use | Support | Contact z/OS | zFavorites



Copyright IBM Corporation 1990, 2014