Installing a rack-mounted server

Use this information to learn about how to install a server into the rack.

Prerequisite for installing the IBM Power System E950 (9040-MR9)
Use the information in this section to understand the prerequisites required for installing the IBM Power System E950 (9040-MR9).
Completing inventory for your server
Use this information to complete inventory for your server.
Attaching the lift handles to the chassis
Attach the six lift handles to the chassis so that at least three people can lift the chassis onto the mounting hardware.
Installing the server into a rack
You must remove system chassis components so that a minimum of three people can lift it into the rack. Install the mounting hardware first, then remove components from the system chassis, and then lift the chassis into place.
Cabling the server and setting up a console
Your console, monitor, or interface choices are guided by the tasks that you want to complete.
Cabling the server and connecting expansion units
Learn how to cable the server and to connect expansion units.
Completing the server setup
Learn about the tasks you must complete to set up your managed system.

Parent topic: Installing the IBM Power System E950 (9040-MR9)

Last updated: Tue, September 29, 2020