sas3ircu commands

Learn about the sas3ircu command. This command is for feature code EKAB using a PCIe adapter.

If the sas3ircu command is not installed, download the utility from ftp://ftp.supermicro.com/driver/P8DTU/. You can find the download by searching that site for sas3ircu; currently: LSI MegaRAID and HBA (AOC-Utility) > SMC-Broadcom (Supermicro 12Gbs SAS HBA - AOC-S3008L-L8i) > AOC-S3008L-L8i > Tools.

To install:

Download the sas3ircu command.
Copy the sas3ircu command file to the /usr/local/bin directory.
To enable the command to be executed, as root, run the command:
```
chmod +x sas3ircu
```

General SAS3IRCU command syntax:

sas3ircu <controller_#> <command> <parameters>

To list the controllers:

sas3ircu list

To show the controller status:

sas3ircu <controller_#> status

To turn the drive light on:

sas3ircu <controller_#> locate <Enclosure:Bay> ON

And off:

sas3ircu <controller_#> locate <Enclosure:Bay> OFF

To view additional help for the command:

sas3ircu help

Last updated: Tue, November 17, 2020