subscribe iconSubscribe to this information
POWER7 information

60/150 GB 16-bit 8-mm internal tape drive (FC 6134)

Learn about the features of this media device.

Table 1. 60/150 GB 16-bit 8-mm internal tape drive features
Feature Description
Description The 60/150GB 16-bit 8-mm Internal Tape Drive consists of a 5.25-inch half-high, 16-bit tape drive. This drive provides a high capacity tape drive for save/restore and archiving functions. This tape drive uses IBM® 8-mm data cartridges and is capable of compression, providing a capacity of up to 150 GB. The 60/150 GB 16-bit 8-mm Internal Tape Drive, is limited to a maximum system ambient operating temperature of 31C (87.8F) at a maximum operating altitude of 2134m (7000 ft). Lower altitudes have higher maximum ambient operating temperatures.

Characteristics:

  • FRU part number: 19P0708
  • Custom card identification number (CCIN): 63A0
  • Capacity: 60 GB Native Mode, 150 GB (typical) Compression Mode
  • Form Factor: 5.25-inch Half-high
  • Media: IBM 8-mm Data Cartridge with SmartClean Technology
  • Operation: Streaming
  • Data Transfer Rate: 12 MB/Sec. Native Mode, 30 MB/Sec. (typical) Compression M
  • Interface: SCSI-2 16-bit Low Voltage Differential (LVD) / Single-ended (SE) Asynchronous/Synchronous
  • Compatibility: Contact your authorized service provider
  • Attributes provided: 60/150GB 16-bit 8-mm Internal Tape Drive
  • Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal 16-bit address
Tools

The following tools and documentation are needed to complete the installation:

  • A flat-blade screwdriver (if this device is not an auto-docking feature on your system)
  • Your system unit documentation, including any service documentation
  • Your operating system documentation

If an item is missing or damaged, contact the place of purchase.

Note: If you are installing the auto-docking version of this device on your system, the remainder of this information does not apply to your system. See your system documentation for information about the auto-docking feature.
Related information

Check that your package contains the following items:

  • The device
  • Media kit containing:
    • 1 data cartridge
    • 1 cleaning cartridge
    • 1 test tape
    • Jumpers (located in a plastic bag)
  • Specific hardware for attaching the device to your specific system, as detailed on the parts listing provided with your device
Parent topic: Managing tape drives

Send feedback Rate this page

Last updated: Thu, July 10, 2014