Stand-alone USB DVD drive (FC EUA5) for the 5105-22E, 9008-22L, 9009-22A, 9009-22G, 9009-41A, 9009-41G, 9009-42A, 9009-42G, 9040-MR9, 9080-M9S, 9223-22H, 9223-22S, 9223-42H, or 9223-42S

Learn about the specifications of the feature code (FC) EUA5 DVD drive.

The stand-alone USB DVD drive (FC EUA5) is an optional, stand-alone external USB-DVD device. It requires high current at 5 V and must use the front USB 3.0 port on the system.

Specifications

  • Part number: 01LU635
  • Custom card identification number (CCIN): 6331 model 005
  • Media:
    • Reads CD-ROM, CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW, DVD-ROM, and DVD-RAM discs
    • Writes 4.7 GB DVD-RAM discs
    • CD read speed at 24X.
    • DVD-ROM read speed at 8X.
    • DVD-RAM at 5X.
    • DVD-RAM has a write speed of 5X.
    • The buffer size is 0.75 MB and cannot be disabled.
  • Interface: USB
  • Connector: USB 2.0
  • Loading tray: supports 12 cm and 8 cm discs
  • Operating positions: horizontal only (on a flat stable surface or floor)
    Note: A USB extension cable is included (P/N 32N1311). The USB extension cable is to be used when there are no safe, flat spots available in the rack. This cable allows the drive to reach the floor. Alternative or additional extension cables are not supported as the total USB cable length can be no longer than 3 meters.
  • Form factor: Stand-alone USB DVD drive
  • DVD video: not supported

Operating system or partition requirements

If you are installing a new feature, ensure that you have the software that is required to support the new feature and that you determine whether any prerequisites must be met for this feature and attaching devices. To check for operating system and partition requirements, see one of the following links: