ISPF messages

ISPA001
Allocation error message - ISPF system data set allocation error - press Enter to continue.
ISPA002
List allocate err msg - List file allocation error - ISPF will operate without a list data set.
ISPA003
Log allocate err msg - Log file allocation error - ISPF will operate without a log data set.
ISPA004
LISTX allocate err msg - Temporary listing data set cannot be allocated.
ISPA005
CNTLX allocate err msg - Temporary control card data set cannot be allocated.
ISPA006
EDITX allocate err msg - Edit backup data set cannot be allocated.
ISPA007
Open error message - Error trying to open 'aaaaaaaa'.
ISPA107
Open error message - Error trying to open data set.
ISPA008
Invalid temp ds-qual. - The temporary data set qualifier is invalid. The log, list and temporary cntl data sets will be allocated without it.
ISPA108
Error from DAIR routine - An error was encountered while running the TSO IKJDAIR routine.
ISPA111
Invalid prefix length - Data set prefix length specified in exit must be greater than or equal to 1 and less than or equal to 27.
ISPA300
APL2 interface error - Invalid APL2 interface chain manager request: aaaaaaaa.
ISPA301
APL2 interface error - Unable to free APL2 environment chain.
ISPA302
APL2 interface error - Unable to get block for APL2 environment chain.
ISPA310
APL2 interface error - Invalid APL2 driver request: aaaaaaaa.
ISPA311
APL2 interface error - APL2 driver is unable to aaaaaaaa storage.
ISPA320
APL2 interface error - Invalid APL2 environment manager request: aaaaaaaa, direction: bbbbbbbb.
ISPA321
APL2 interface error - APL2 environment manager is unable to aaaaaaaa storage.
ISPA322
ISPF/APL2 link error - The SELECT service request to initiate APL2 requires keyword: lang(APL).
ISPA323
ISPF/APL2 link ended - The APL2 side has ended, but there are ISPF service requests outstanding.
ISPA324
Invalid APL2 selection - Outstanding APL2 workspace requests for ISPF services must be terminated.
ISPA325
aaaaaaaa variable request - Outstanding APL2 workspace requests for ISPF services must be terminated.
ISPA326
ISPF/APL2 link damaged - APL2 request has ended, but there are ISPF service requests outstanding.
ISPA330
APL2 workspace error - Function: aaaaaaaa, variable: bbbbbbbb, return code: cccccccc.
ISPA331
APL2 workspace error - Function: list all variables, return code: aaaaaaaa.
ISPA332
APL2 interface error - APL2 variable services exit routine is unable to aaaaaaaa storage.
ISPA333
Data truncation occurred - Data for APL2 variable list is too long.
ISPA334
APL2 variable error - The value for variable aaaaaaaa is not a character scalar or vector.
ISPA335
APL2 interface error - Invalid auxiliary processor variable services request: aaaaaaaa.
ISPA336
Invalid variable name - aaaaaaaa is not a valid variable name for both ISPF and APL2.
ISPA337
APL2 function limit - An ISPF service may retrieve up to 64k bytes of APL2 workspace data.
ISPA400
ISPAPTT dialog error - No parameter input was passed.
ISPA401
ISPAPTT dialog error - Unexpected return code aaaaaaaa from service bbbbbbbb.
ISPC001
ISPCNT error: RC =aaaaaaaa - Open failure, member does not exist in data set.
ISPC002
ISPCNT error: RC =aaaaaaaa - The input data set is a partitioned data set. Specify a member name.
ISPC003
ISPCNT error: RC =aaaaaaaa - SPF parm data must have the keyword TKV in the 3-5 or 4-6 position.
ISPC004
ISPCNT error: RC =aaaaaaaa - Open failure, allocate ISPPARM ddname to a SPF parms member.
ISPC010
ISPC010W: Warning. Line aaaaaaaa of file "bbbbbbbb". The "cccccccc=dddddddd" attribute specification is not valid when the "eeeeeeee" conversion option has been specified. "cccccccc=dddddddd" will not be used.
ISPC011
ISPC011W: Warning. Line aaaaaaaa of file "bbbbbbbb". Previous "cccccccc" tag attribute was missing or not valid. "dddddddd" tag will be ignored.
ISPC012
ISPC012W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc attribute has already been defined for the dddddddd tag. cccccccc = "eeeeeeee" will be ignored and the first setting will be used.
ISPC013
ISPC013W: Warning. Line aaaaaaaa of file "bbbbbbbb". The "cccccccc=dddddddd" attribute is not defined for the "eeeeeeee" tag and will be ignored.
ISPC013A
ISPC013AW: Warning. Line aaaaaaaa of file "bbbbbbbb". The "cccccccc" attribute is not defined for the "dddddddd" tag and will be ignored.
ISPC014
ISPC014W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc attribute has already been defined for the dddddddd tag. This duplicate attribute specification will be ignored.
ISPC014A
ISPC014AW: Warning. Line aaaaaaaa of file "bbbbbbbb". The "cccccccc=dddddddd" attribute has already been defined. This duplicate attribute specification will be ignored.
ISPC015
ISPC015W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc attribute is not valid when the dddddddd attribute is also specified. "cccccccc=eeeeeeee" will not be used.
ISPC015A
ISPC015AW: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc attribute is not valid when the dddddddd attribute is also specified. cccccccc will not be used.
ISPC016
ISPC016E: Error. Line aaaaaaaa of file "bbbbbbbb". The cccccccc tag can only be coded within a text string. The previous tag has not been properly closed.
ISPC017
ISPC017W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc="dddddddd" attribute value is not supported in the conversion process. The default value "eeeeeeee" will be used.
ISPC018
ISPC018E: Error. Line aaaaaaaa of file "bbbbbbbb". A required tag was not coded under the cccccccc tag. One of these tags is required to be coded under the cccccccc tag: "dddddddd".
ISPC019
ISPC019E: Error. Line aaaaaaaa of file "bbbbbbbb". Required cccccccc attribute was not specified or was not valid on the dddddddd tag.
ISPC020
ISPC020W: Warning. ISPDTLC Release aaaaaaaa. for bbbbbbbb. is being run on ISPF Release cccccccc. for dddddddd.. Results are not predictable.
ISPC020A
ISPC020AI: ISPF Dialog Tag Language Conversion Utility for ISPF aaaaaaaa.. Current APAR level: bbbbbbbb.. Current PTF number: cccccccc..
ISPC021
ISPC021I: aaaaaaaa ISPF bbbbbbbb Dialog Tag Language Conversion Utility
ISPC022
ISPC022I: Converting source file "aaaaaaaa"...
ISPC023
ISPC023W: Warning. Line aaaaaaaa of file "bbbbbbbb". Duplicate source file name "cccccccc" ignored during DTLLST processing.
ISPC024
ISPC024I: Duplicate source file name "aaaaaaaa" ignored during member selection processing.
ISPC025
ISPC025I: Profile processing has been changed. The entries for 'DTLMIN' will be ignored. Conversion Utility messages are now part of the standard ISPF message library. Please remove all 'DTLMIN' entries from your profile.
ISPC026
ISPC026I: Profile processing has been changed. The entries for 'DTLNLS' will be ignored. The multicultural support literals are now provided through an ISPF facility. Please remove all 'DTLNLS' entries from your profile.
ISPC027
ISPC027I: Source file name "aaaaaaaa" ignored (not found) during member selection processing.
ISPC028
ISPC028I: aaaaaaaa message(s) have been suppressed.
ISPC028A
ISPC028AI: Total of aaaaaaaa message(s) have been suppressed.
ISPC029
aaaaaaaa warning(s) and bbbbbbbb error(s) found.
ISPC029A
ISPC029AI: Total of aaaaaaaa warning(s) and bbbbbbbb error(s) found.
ISPC030
ISPC030W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc end-tag does not end any open tag and is ignored. The current open-tag is dddddddd..
ISPC031
ISPC031E: Error. Line aaaaaaaa of file "bbbbbbbb". cccccccc has missing end-tag and was ended by dddddddd tag.
ISPC032
ISPC032E: Error. Line aaaaaaaa of file "bbbbbbbb". cccccccc tag ended prematurely by the end of the file.
ISPC035
ISPC035W: Warning. Line aaaaaaaa of file "bbbbbbbb". No declaration found for ENTITY "cccccccc". The variable cannot be substituted. (ENTITY definitions are case sensitive. Verify that the entity-name definition matches the entity reference.)
ISPC036
ISPC036W: Warning. Line aaaaaaaa of file "bbbbbbbb". During SOURCE tag processing, no ENTITY declaration found for "cccccccc". The variable cannot be substituted. If "cccccccc" is a TSO command or other panel logic value, this message may be removed by coding "%amp;dddddddd". If "cccccccc" is a variable to be substituted, review the DTL source file. (ENTITY definitions are case sensitive. Verify that the entity-name definition matches the entity reference.)
ISPC039
ISPC039E: Error. Line aaaaaaaa of file "bbbbbbbb". cccccccc ended prematurely by dddddddd start-tag.
ISPC040
ISPC040E: Error. Line aaaaaaaa of file "bbbbbbbb". cccccccc tag cannot be coded after previously coded dddddddd tag.
ISPC041
ISPC041W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc tag cannot be coded after previously coded dddddddd tag. cccccccc and its nested tags will be ignored.
ISPC042
ISPC042E: Error. Line aaaaaaaa of file "bbbbbbbb". Document type is unknown.
ISPC043
ISPC043E: Error. Line aaaaaaaa of file "bbbbbbbb". Multiple DOCTYPE records.
ISPC044
ISPC044W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc and its nested tags will be ignored in the conversion process.
ISPC045
ISPC045E: Error. Line aaaaaaaa of file "bbbbbbbb". Unable to format data. Reason code was "cccccccc".
ISPC046
ISPC046W: Warning. Line aaaaaaaa of file "bbbbbbbb". Multiple nested REGION tags with the DIR=HORIZ attribute are not allowed. All tags nested within this REGION tag will be syntax checked and then ignored during panel formatting.
ISPC047
ISPC047W: Warning. Line aaaaaaaa of file "bbbbbbbb". The use of the DEPTH attribute to create a scrollable area on the cccccccc tag is not valid because DEPTH has been specified on an enclosing tag. The DEPTH attribute is ignored. ISPF does not support nested scrollable areas.
ISPC050F
Fixed length output panel libraries must have a record length of 80, 132, or 160 bytes.
ISPC050V
Variable length output panel libraries should have a record length of 84, 136, or 164 bytes. The minimum record length is 84 and the maximum is 164.
ISPC051F
Fixed length output message libraries must have a minimum record length of 80 bytes.
ISPC051V
Variable length output message libraries must have a minimum record length of 84 bytes.
ISPC052F
Fixed length output log files must have a minimum record length of 80 bytes.
ISPC052V
Variable length output log files must have a minimum record length of 84 bytes.
ISPC053F
Fixed length output list files must have a minimum record length of 80 bytes.
ISPC053V
Variable length output list files must have a minimum record length of 84 bytes.
ISPC054F
Fixed length output script files must have a minimum record length of 80 bytes.
ISPC054V
Variable length output script files must have a minimum record length of 84 bytes.
ISPC055
Tables files must have a record length of 80 bytes.
ISPC059
Record format "aaaaaaaa" is not valid for file "bbbbbbbb".
ISPC060
Press Enter to start conversion.
ISPC061
Verify panel settings and press Enter to start conversion.
ISPC062
Verify panel settings and press Enter to submit conversion job.
ISPC067
Select code not valid - Use "S" or "/" to select, "E" to Edit, "V" to View, "B" to Browse, or primary command DESELECT to deselect all entries and erase all line command notation entries.
ISPC068A
Select members to be converted. (Enter "S *" to select all members.)
ISPC068B
Select members to be converted or END to start conversion processing.
ISPC068C
Only members from the first 16 data sets are included in this list. Select members to be converted. (Enter "S *" to select all members.)
ISPC069A
No members match the specified pattern or the input data set(s) are empty.
ISPC069B
No members have been selected.
ISPC069C
DTL conversion in process for "aaaaaaaa".
ISPC071
You may select either the option for KANA or NOKANA, or you may leave both options blank.
ISPC072
Select option for "Display converted panels" or "Display converted panels in a window", but not both.
ISPC073
Select option for KANA or NOKANA, but not both.
ISPC074
Select option for Generate List file or Generate List file with substitution, but not both.
ISPC075
The aaaaaaaa language requires that the DBCS option be selected. Either select the DBCS option or specify a non-DBCS language.
ISPC076
Enter up to 4 positions for application id. First position must be alpha.
ISPC077
The KANA option is valid only with the JAPANESE language selection.
ISPC078
The DBCS option is valid only for JAPANESE, CHINESES, CHINESET or KOREAN language selection.
ISPC079
Choose a language from the ISPF supported languages. Use the Help option for a list of languages.
ISPC080
Enter a valid DTL source file member name.
ISPC081
Enter a valid DTL source library name.
ISPC082
Enter a valid output panel library name.
ISPC083
Enter a valid output message library name.
ISPC084
Enter a valid output log file name.
ISPC086
Enter a valid DTL source filename.
ISPC091
Enter a valid log file member name.
ISPC092
Enter a valid output list file name.
ISPC093
Enter a valid list file member name.
ISPC094
Enter a valid output SCRIPT library name.
ISPC095
Enter a valid TABLES library name.
ISPC100
ISPC100E: Error. Line aaaaaaaa of file "bbbbbbbb". The DBCS control byte "SO" has been detected in your source file, but the DBCS option has not been specified. The conversion results are unpredictable. The conversion utility has automatically enabled the DBCS option to allow formatting of your source file to continue. Reconvert your source file specifying the DBCS option.
ISPC101
ISPC101E: Error. Line aaaaaaaa of file "bbbbbbbb". DBCS SO byte encountered before required DBCS SI byte.
ISPC102
ISPC102W: Warning. Line aaaaaaaa of file "bbbbbbbb". At least 4 byte field widths are required to format DBCS strings. There is not enough room to format the "cccccccc" on the dddddddd tag.
ISPC103
ISPC103E: Error. Line aaaaaaaa of file "bbbbbbbb". Cannot end string without DBCS SI byte.
ISPC104
ISPC104E: Error. Line aaaaaaaa of file "bbbbbbbb". Cannot end DBCS string on odd byte boundary.
ISPC105
ISPC105E: Error. Line aaaaaaaa of file "bbbbbbbb". DBCS SI byte encountered without matching beginning DBCS SO byte.
ISPC106
ISPC106W: Warning. Line aaaaaaaa of file "bbbbbbbb". No room to format data.
ISPC107
ISPC107W: Warning. Line aaaaaaaa of file "bbbbbbbb". The VARCLASS type "cccccccc" has no meaning for dddddddd entry fields and is ignored by the conversion utility.
ISPC108
ISPC108E: Error. The specified or default language "aaaaaaaa" has been changed to "bbbbbbbb" to allow formatting of your source file to continue. Reconvert your source file specifying a DBCS supported language.
ISPC109
ISPC109W: Warning. The use of the "aaaaaaaa" language requires that the DBCS option be specified for the conversion. The conversion utility has automatically enabled the DBCS option.
ISPC110
ISPC110W: Warning. Line aaaaaaaa of file "bbbbbbbb". String constant exceeds 253 characters and will be truncated.
ISPC112
ISPC112W: Warning. Line aaaaaaaa of file "bbbbbbbb". The key value "cccccccc" is not valid. Valid values are F1-F24 only.
ISPC114
ISPC114W: Warning. Line aaaaaaaa of file "bbbbbbbb". Odd length DBCS substring encountered. Beginning of string padded with a single-byte blank.
ISPC115
ISPC115W: Warning. Line aaaaaaaa of file "bbbbbbbb". No keys were defined for "cccccccc".
ISPC120
ISPC120E: Error. ISPF Keylist was not created. Possible reasons may be that the conversion tool was not run as a dialog on ISPF or ISPF was not active.
ISPC121
ISPC121W: Warning. Line aaaaaaaa of file "bbbbbbbb". Key Description exceeds allowable length of cccccccc characters.
ISPC122
ISPC122W: Warning. Line aaaaaaaa of file "bbbbbbbb". The internal-command-name "cccccccc" is not valid. When dddddddd, eeeeeeee must be "ffffffff".
ISPC123
ISPC123W: Warning. Line aaaaaaaa of file "bbbbbbbb". Internal-command-name "cccccccc" is not valid for the "dddddddd" function key.
ISPC126
ISPC126W: Warning. Line aaaaaaaa of file "bbbbbbbb". Duplicate "cccccccc" key was encountered and will be ignored.
ISPC127
ISPC127W: Warning. Line aaaaaaaa of file "bbbbbbbb". The key value "cccccccc" is not supported by the conversion utility as a valid key assignment. Valid values are F1-F24 only.
ISPC128
ISPC128E: Error. Line aaaaaaaa of file "bbbbbbbb". Key list Application ID required. "cccccccc" must be specified as an invocation option in order to write "dddddddd".
ISPC129A
ISPC129AE: Error. Line aaaaaaaa of file "bbbbbbbb". Return code of "12" (Attributes are not valid) from the SELECT service attempting to create an ISPF Keylist.
ISPC129B
ISPC129BE: Error. Line aaaaaaaa of file "bbbbbbbb". Return code of "16" (Key defined is not valid) from the SELECT service attempting to create an ISPF Keylist.
ISPC129C
ISPC129CE: Error. Line aaaaaaaa of file "bbbbbbbb". Return code of "cccccccc" (Severe Error) from the SELECT service attempting to create an ISPF Keylist.
ISPC129D
ISPC129DE: Error. Line aaaaaaaa of file "bbbbbbbb". Return code of "24" (Syntax Error) from the SELECT service attempting to create an ISPF Keylist.
ISPC129E
ISPC129EE: Error. Line aaaaaaaa of file "bbbbbbbb". Return code of "28" (Keylist entry not found) from the SELECT service attempting to create an ISPF Keylist.
ISPC129F
ISPC129FE: Error. Line aaaaaaaa of file "bbbbbbbb". Return code of "32" (Keylist table open) from the SELECT service attempting to create an ISPF Keylist. (The keylist update program received a return code of "12" from the TBOPEN service.)
ISPC129G
ISPC129GE: Error. Line aaaaaaaa of file "bbbbbbbb". Return code of "36" (ISPTABL file not allocated) from the SELECT service attempting to create an ISPF Keylist. (The keylist update program received a return code of "16" from the TBCLOSE service.)
ISPC130
ISPC130W: Warning. Line aaaaaaaa of file "bbbbbbbb". Unknown numeric value found processing DTL source string "cccccccc". Check for sequence numbers in the DTL source file.
ISPC131
ISPC131W: Warning. Line aaaaaaaa of file "bbbbbbbb". Text string "cccccccc" found in source file where tag is expected. Text string is ignored.
ISPC132
ISPC132W: Warning. Line aaaaaaaa of file "bbbbbbbb". Undefined "cccccccc" start-tag. "cccccccc" is ignored.
ISPC133
ISPC133E: Error. Line aaaaaaaa of file "bbbbbbbb". The first character in keyword "cccccccc" is not valid. "cccccccc" must start with characters "A-Z" and the ">" must be used as the closing tag delimiter. One possible cause is that a previous tag was not closed with the ">" delimiter.
ISPC134
ISPC134E: Error. Line aaaaaaaa of file "bbbbbbbb". Pending quote was not closed and caused all records in the file to be read in an attempt to find the closing quote.
ISPC135
ISPC135W: Warning. Line aaaaaaaa of file "bbbbbbbb". Unmatched quotes in entity value: cccccccc.. Panel formatting may be affected.
ISPC136
ISPC136E: Error. Line aaaaaaaa of file "bbbbbbbb". Incorrect tag syntax with multiple close tag delimiters found on the cccccccc tag.
ISPC137
ISPC137E: Error. Line aaaaaaaa of file "bbbbbbbb". Incorrect tag syntax. The cccccccc tag must follow the preceding tag with no intervening blanks or text. Only one cccccccc tag is allowed within a LI, LP or P tag.
ISPC140
ISPC140W: The DBCS option is required when KANA has been specified. The conversion utility has automatically enabled the DBCS option.
ISPC141
ISPC141W: The JAPANESE language is required when KANA has been specified. The conversion utility has automatically set the language to "JAPANESE".
ISPC142
ISPC142W: The DBCS option has been specified, but either no language has been specified or the language selected is not a DBCS language. The conversion utility has automatically set the language to "JAPANESE".
ISPC149
ISPC149E: Error. Line aaaaaaaa of file "bbbbbbbb". Line contains DBCS data which is not valid. Hex value of data string ="cccccccc".
ISPC150
ISPC150W: Warning. Line aaaaaaaa of file "bbbbbbbb". When "cccccccc", "dddddddd" on the eeeeeeee tag does not conform to the CUA Architecture definition and will therefore not be CUA compliant.
ISPC151
ISPC151W: Warning. Line aaaaaaaa of file "bbbbbbbb". The use of cccccccc="dddddddd" on the eeeeeeee tag does not conform to the CUA Architecture definition and will therefore not be CUA compliant.
ISPC160
Enter "F" for fixed length panels or "V" for variable length panels.
ISPC161
Enter a valid panel record length (80, 132, or 160).
ISPC162
Enter a valid file name for an output panel MACLIB.
ISPC163
Enter a valid file name for an output message MACLIB.
ISPC164
Enter a valid file name for an output log file.
ISPC165
Enter a valid file name for an output list file.
ISPC166
Enter a valid file name for an output SCRIPT MACLIB.
ISPC201
ISPC201E: Error. Line aaaaaaaa of file "bbbbbbbb". No help panel title specified after Help Tag.
ISPC202
ISPC202W: Warning. Line aaaaaaaa of file "bbbbbbbb". Panel title has been truncated.
ISPC203
ISPC203W: Warning. Line aaaaaaaa of file "bbbbbbbb". Panel title cannot be centered within the available panel width.
ISPC204
ISPC204W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc="dddddddd" maximum length is eeeeeeee character(s). cccccccc will be truncated to "ffffffff". Multiple output panels are being created to simulate tutorial scrolling. The truncated name will be the name of the first panel created. Subsequent panels will have an eighth character suffix of 0-1 and A-Z for a maximum of 37 total panels.
ISPC205
ISPC205E: Error. Line aaaaaaaa of file "bbbbbbbb". Unable to create any more cccccccc panels dynamically to simulate scrolling. The maximum of 37 panels has been exceeded.
ISPC230
Enter the seven character FMID for the SMP/E USERMOD.
ISPC231
Enter DDDEF name - Enter the DDDEF name to be used as the SYSLIB for the keyword source in the SMP/E USERMOD.
ISPC232
Enter DDDEF name - Enter the DDDEF name to be used as the SYSLIB for the load modules in the SMP/E USERMOD.
ISPC233
Enter DDDEF name - Enter the DDDEF name to be used as the DISTLIB for the keyword source in the SMP/E USERMOD.
ISPC234
Error Building USERMOD - An error occurred building the SMP/E USERMOD. Correct errors reported and retry the function.
ISPC240
ISPC240W: Warning. Line aaaaaaaa of file "bbbbbbbb". Lines that are wider than the current INFO width have been truncated.
ISPC241
ISPC241W: Warning. Line aaaaaaaa of file "bbbbbbbb". Lines that are longer than the current PANEL record length have been truncated.
ISPC242
ISPC242W: Warning. Line aaaaaaaa of file "bbbbbbbb". Lines that are wider than the current PANEL width have been truncated.
ISPC243
ISPC243W: Warning. Line aaaaaaaa of file "bbbbbbbb". Extraneous text "cccccccc" found during the format process of "dddddddd" tag. Text is ignored.
ISPC244
ISPC244W: Warning. Line aaaaaaaa of file "bbbbbbbb". No text found during the format process for the "cccccccc" tag. Panel formatting may be affected.
ISPC245
ISPC245W: Warning. Line aaaaaaaa of file "bbbbbbbb". Panel width too small to include LSTCOL DATAVAR=cccccccc.. cccccccc will not be written to the panel.
ISPC246
ISPC246W: Warning. Panel width too small to include "aaaaaaaa".
ISPC247
ISPC247W: Warning. Line aaaaaaaa of file "bbbbbbbb". Panel width too small to include LSTCOL text "cccccccc".
ISPC248
ISPC248W: Warning. Line aaaaaaaa of file "bbbbbbbb". Unable to format a divider line for the LSTFLD tag because all 8 available model lines have been used by nested LSTCOL tags.
ISPC249
ISPC249W: Warning. Line aaaaaaaa of file "bbbbbbbb". LSTCOL tag "column-heading" extends beyond right panel boundary and will be truncated to "cccccccc".
ISPC250
Keyword file saved - The updated keyword file was successfully saved to aaaaaaaa..
ISPC251
Keyword file verified - Keyword file aaaaaaaa was verified and is correct.
ISPC252
Keyword file errors - Errors were found during verification of keyword file aaaaaaaa and were previously displayed.
ISPC253
Load module built - The configuration table load module and VSAM load module were successfully saved to aaaaaaaa..
ISPC254
Load module build error - An error was encountered creating load module aaaaaaaa from keyword file bbbbbbbb..
ISPC255
Conversion successful - Conversion of assembler file aaaaaaaa to keyword file bbbbbbbb was successful.
ISPC256
Conversion error - Conversion of assembler source file aaaaaaaa to keyword file bbbbbbbb failed.
ISPC257
Member name not allowed - Member name is not allowed on the load and object data sets. Specify the member name in the Configuration Member and VSAM Member fields.
ISPC258
Assemble failed - The assemble of the configuration table source failed, see the assembly listing below for details.
ISPC259
Link Edit failed - The link edit of the configuration table failed, see the link edit listing below for details.
ISPC260
Rename needed - The configuration load modules were successfully saved to aaaaaaaa., but using names bbbbbbbb. and cccccccc.. These members must be named ISPCFIGU and ISPCFIGV to be used as ISPF configuration modules.
ISPC261
Allocation error - An error was encountered allocating Keyword data set aaaaaaaa..
ISPC262
EXECIO error - An error was encountered reading Keyword data set aaaaaaaa..
ISPC263
Allocation error - An error was encountered allocating the temporary assembler data set.
ISPC264
Rename needed - The configuration load module was successfully saved to aaaaaaaa., but using name bbbbbbbb.. This member must be named ISPCFIGU to be used as an ISPF configuration module.
ISPC265
Load module built - The configuration table load module was successfully saved to aaaaaaaa..
ISPC266
Allocation error - An error was encountered allocating the temporary object data set.
ISPC267
Entered required field - Enter the selection for the type of build you want: 1 to build the Configuration Table into a load module. 2 to build the Configuration Table into an SMP/E USERMOD.
ISPC268
Incorrect attributes - The keyword data set must be a partitioned data set with a record length of at least 251 for fixed data sets and 255 for variable data sets.
ISPC269
Allocation error - An error was encountered allocating assembler input data set aaaaaaaa..
ISPC270
EXECIO error - An error was encountered reading assembler input data set aaaaaaaa..
ISPC271
Keyword file saved - Updated keyword file has been saved to aaaaaaaa and verified as correct.
ISPC272
Verification failed - Updated keyword file has been saved to aaaaaaaa but failed verification. Verification messages were previously displayed.
ISPC273
Keyword file saved - Updated keyword file has been saved to aaaaaaaa but not verified.
ISPC274
Conversion error - Conversion of configuration table to keyword file aaaaaaaa failed.
ISPC275
Function required - The function letter of B(rowse) E(dit) or V(iew) is required.
ISPC276
Defaults loaded - Keyword file aaaaaaaa was not found, default values have been set for all configuration options.
ISPC277
Keyword file loaded - Defaults have been initialized from keyword file aaaaaaaa..
ISPC278
Block size value of aaaaaaaa is not a multiple of bbbbbbbb..
ISPC279
Block size value of aaaaaaaa is not a multiple of record length value bbbbbbbb..
ISPC280
Assemble failed - The assemble of the configuration table VSAM module source failed, see the assembly listing below for details.
ISPC281
Link Edit failed - The link edit of the configuration table VSAM module failed, see the link edit listing below for details.
ISPC282
Invalid data set name - The data set name specified is invalid. Enter the data set name and member for the keyword file in the separate fields provided.
ISPC283
File Tailoring Failed - The aaaaaaaa service returned a code of bbbbbbbb processing skeleton ISPCSKEL.
ISPC284
Invalid data set name - Remove the quotes from the data set name or pattern entered.
ISPC285
Invalid combination - At least one data set must be specified for each restriction field selected.
ISPC286
Input file empty - The input data set or member specified for conversion is empty.
ISPC287
Invalid input file - The input file specified is not an ISPF Configuration Table assembler source module, no ISRCONFG CSECT found.
ISPC288
Invalid member name - The same member name cannot be specified for both the Configuration member and the VSAM member, ISPCFIGV cannot be specified for the Configuration member, and ISPCFIGU cannot be specified for the VSAM member.
ISPC289
Write error - An error was encountered writing the keyword file to the output data set. Data set may be full, compress the library and retry the function.
ISPC290
GIMDTS error - An error was encountered with GIMDTS converting the keyword source file to the SMP/E output data set. See the following GIMDTS listing.
ISPC291
IEBCOPY error - An error was encountered with IEBCOPY unloading the load module aaaaaaaa. to a temporary sequential file. See the IEBCOPY listing.
ISPC292
GIMDTS error - An error was encountered with GIMDTS converting the IEBCOPY unloaded load module aaaaaaaa. to the SMP/E output data set. See the GIMDTS listing.'
ISPC293
EXECIO error - An error was encountered writing the USERMOD to the output data set. Data set may be full, compress the library and retry the function.
ISPC294
USERMOD built - The SMP/E USERMOD was successfully saved to aaaaaaaa..
ISPC295
Enter DDDEF name - Enter the DDDEF name to be used as the DISTLIB for the load modules in the SMP/E USERMOD.
ISPC296
Enter the seven character name of a prior USERMOD to be superseded by this SMP/E USERMOD. The fields must be filled from top to bottom.
ISPC297
Invalid data set name - The data set name specified is invalid. The SMP/E data set name must not contain a member name.
ISPC298
Incorrect attributes - The SMP/E data set must be a partitioned data set with a record length of 80 and a record format of FB.
ISPC299
Enter a seven character identifier for the SMP/E USERMOD.
ISPC300
Use a different name. ISPCFIGU is currently being used by ISPF and a copy from a different data set cannot be loaded.
ISPC301
ISPC301W: Warning. Line aaaaaaaa of file "bbbbbbbb". Duplicate MSG tag SUFFIX found. This MSG tag will be ignored.
ISPC302
ISPC302W: Warning. Line aaaaaaaa of file "bbbbbbbb". Message text is longer than cccccccc characters and will be truncated.
ISPC303
ISPC303W: Warning. Line aaaaaaaa of file "bbbbbbbb". MSGMBR has no messages. No message file will be written.
ISPC304
ISPC304W: Warning. Line aaaaaaaa of file "bbbbbbbb". MSG tag contains no text. Message cannot be created.
ISPC305
ISPC305W: Warning. Line aaaaaaaa of file "bbbbbbbb". Conflict on VARSUB tag between attributes "VAR" and "FIELD". "FIELD" cannot be specified if "VAR" is used. "FIELD" is ignored for this conversion.
ISPC307
ISPC307W: Warning. Line aaaaaaaa of file "bbbbbbbb". The SUFFIX value "cccccccc" is not valid because the resulting message number would be more than 8 characters in length. This MSG tag will be ignored.
ISPC309
ISPC309W: Warning. Line aaaaaaaa of file "bbbbbbbb". There is a conflict in the use of "WIDTH=cccccccc" on the MSGMBR tag and "FORMAT=ASIS" on the MSG tag. The message may not display as intended.
ISPC310
ISPC310W: Warning. Line aaaaaaaa of file "bbbbbbbb". The first line of the message created by MSG tag formatting is longer than 80 characters. Message cannot be created.
ISPC311
ISPC311W: Warning. Line aaaaaaaa of file "bbbbbbbb". NAME on MSGMBR tag is not valid. No message file will be written.
ISPC320
Invalid Application ID - Enter 1 to 4 alphanumeric characters (first cannot be numeric). Alternatively, use the special form '*m:n' to use from character 'm' to 'n' of the system name (ZSYSID)
ISPC321
Invalid Application ID - The start position for obtaining the application ID from the system name (ZSYSID) must be numeric and in the range 1 to 8.
ISPC322
Invalid Application ID - The colon(:) before the end position has been omitted
ISPC323
Invalid Application ID - The end position for obtaining the application ID from the system name (ZSYSID) must be numeric and in the range 1 to 8. It must also be greater than or equal to the start position, and not more than start position + 3
ISPC330
Invalid Qualifier - Enter up to 8 alphanumeric characters (first cannot be numeric), or enter a qualifier containing system symbolic variables.
ISPC331
Invalid Qualifier - Characters not associated with a system symbolic variable must be valid alphanumeric characters (first cannot be numeric).
ISPC332
Symbol Name Invalid - Enter up to 8 alphanumeric characters, following the '&' sign (first cannot be numeric).
ISPC333
Start Position Invalid - The Start Position for Symbol aaaaaaaa must be non-zero numeric value in the range -bbbbbbbb to +bbbbbbbb..
ISPC334
Substring Length Invalid - The Substring Length for Symbol aaaaaaaa must be a positive numeric value in the range 1 to bbbbbbbb..
ISPC335
Substring Parms Missing - Specify both substring start position and length separated by ':' and enclosed in '()'.
ISPC400
ISPC400W: Warning. Line aaaaaaaa of file "bbbbbbbb". External-command-name must be one word. It cannot contain any blanks. The external-command-name is ignored.
ISPC401
ISPC401W: Warning. Line aaaaaaaa of file "bbbbbbbb". The RUN option for the ACTION tag was specified without a command. The ACTION tag is ignored.
ISPC402
ISPC402W: Warning. Line aaaaaaaa of file "bbbbbbbb". Internal-command-name must be equal to the external-command-name in order to allow command truncation when the T tag is used. There will be no minimum command name in this command.
ISPC403
ISPC403W: Warning. Line aaaaaaaa of file "bbbbbbbb". Command table was not written because the required "APPLID" keyword was not specified.
ISPC404
ISPC404W: Warning. Line aaaaaaaa of file "bbbbbbbb". An error occurred while processing a command table. Processing of command table has been canceled after a return code of cccccccc from table service "dddddddd".
ISPC405
ISPC405E: Error. ISPF Command Table was not created. An error occurred while opening a command table. Refer to your ISPF documentation on TBOPEN for a Return Code of "aaaaaaaa".
ISPC406
ISPC406E: Error. ISPF Command Table was not created. Possible reasons may be that the conversion tool was not run as a dialog on ISPF or ISPF was not active.
ISPC407A
ISPC407AE: Error. Line aaaaaaaa of file "bbbbbbbb". Return code of "16" (ISPTABL file not allocated) from the TBCLOSE service attempting to create an ISPF Command Table.
ISPC407B
ISPC407BE: Error. Line aaaaaaaa of file "bbbbbbbb". Return code of "cccccccc" (Severe Error) from the TBCLOSE service attempting to create an ISPF Command Table.
ISPC408
ISPC408E: Error. Line aaaaaaaa of file "bbbbbbbb". The dynamic area identifier "cccccccc" is longer than the dddddddd characters of dynamic area width.
ISPC409
ISPC409E: Error. Line aaaaaaaa of file "bbbbbbbb". The graphic area identifier "cccccccc" is longer than the dddddddd characters of graphic area width.
ISPC410
ISPC410W: Warning. Line aaaaaaaa of file "bbbbbbbb". The ALIAS for command cccccccc was found after the command. The ALIAS entry must precede the command it references. The ALIAS will be unavailable to ISPF. Please update your tag source file to move the ALIAS before the referenced command.
ISPC411
ISPC411W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc is longer than dddddddd characters, will be truncated.
ISPC412
ISPC412W: Warning. Line aaaaaaaa of file "bbbbbbbb". A LSTGRP heading must include at least one field from the first model line to be displayed. This heading cannot be formatted and is being reset to blanks.
ISPC413
ISPC413W: Warning. Line aaaaaaaa of file "bbbbbbbb". External command string cannot be less than 2 characters in length and will be set to " ".
ISPC414
ISPC414W: Warning. Line aaaaaaaa of file "bbbbbbbb". Only one keyword from this list can be specified on an ACTION tag: RUN, CLASS, SETVAR, TOGVAR.
ISPC415
ISPC415W: Warning. Line aaaaaaaa of file "bbbbbbbb". ISPF will support a Command Action up to 240 characters in length. The Command Action will be truncated.
ISPC416
ISPC416W: Warning. Line aaaaaaaa of file "bbbbbbbb". ISPF does not support the "ACTION=cccccccc" coded on the dddddddd tag. The Command Action will be set to "NOP".
ISPC417
ISPC417E: Error. Line aaaaaaaa of file "bbbbbbbb". Additional parameters must follow cccccccc and will affect processing.
ISPC418
ISPC418W: Warning. Line aaaaaaaa of file "bbbbbbbb". No parameters are valid following cccccccc..
ISPC419
ISPC419W: Warning. Line aaaaaaaa of file "bbbbbbbb". No commands were specified within the CMDTBL tag. No command table will be written.
ISPC420
ISPC420W: Warning. Line aaaaaaaa of file "bbbbbbbb". A valid CMDACT ACTION was not specified for cccccccc.
ISPC421
ISPC421W: Warning. Line aaaaaaaa of file "bbbbbbbb". "cccccccc" exceeds the maximum length of dddddddd text characters that can be placed on the current panel command line. "cccccccc" will be truncated to fit on the command line.
ISPC422
ISPC422W: Warning. Line aaaaaaaa of file "bbbbbbbb". This panel contains a )MODEL line generated by the LSTFLD and LSTCOL tags but not a required CMDAREA command line to accompany it. A command line is being added to the panel.
ISPC423
ISPC423W: Warning. Line aaaaaaaa of file "bbbbbbbb". The requested SCROLL amount field will not fit on the command line for this panel. The SCROLL amount field is ignored.
ISPC423A
ISPC423AW: Warning. Line aaaaaaaa of file "bbbbbbbb". The point-and-shoot text as specified by the PSBUTTON attribute will not fit on the command line for this panel. The point-and-shoot text is not added to the command line.
ISPC424
ISPC424E: Error. Line aaaaaaaa of file "bbbbbbbb". An error occurred during the completion of processing for command table "cccccccc". Processing of the command table has been canceled after a return code of dddddddd from ISPF service "eeeeeeee". A temporary command table member "ffffffff" has been created on table file "gggggggg".
ISPC425
ISPC425W: Warning. Line aaaaaaaa of file "bbbbbbbb". "cccccccc" tag field name "dddddddd" exceeds the maximum field width of eeeeeeee characters available for the name. The NOZVARS option is ignored for field name "dddddddd".
ISPC426
ISPC426E: Error. Line aaaaaaaa of file "bbbbbbbb". "LINE=cccccccc" is not valid because a previous variable model line definition exists for this line.
ISPC427
ISPC427E: Error. Line aaaaaaaa of file "bbbbbbbb". "LINE=cccccccc" is not valid because a standard model line definition exists for this line.
ISPC430
ISPC430W: Warning. Line aaaaaaaa of file "bbbbbbbb". This is a selection panel and requires a command line, but no CMDAREA tag was present. A command line is being added to the panel.
ISPC431
ISPC431W: Warning. Line aaaaaaaa of file "bbbbbbbb". The default name "ZCMD" was used to generate ")INIT" and ")PROC" section panel statements. These panel statements are not correct because the CMDAREA tag name has been specified as "cccccccc". Move the CMDAREA tag so that it is placed before the SELFLD tag that defines the menu choices and reconvert the panel.
ISPC432
ISPC432W: Warning. Line aaaaaaaa of file "bbbbbbbb". ACTION tags following an ACTION tag with the RUN attribute specified are not valid and will be ignored.
ISPC433
ISPC433W: Warning. Line aaaaaaaa of file "bbbbbbbb". TYPE=cccccccc on the SELFLD tag is not valid on a panel when the MENU keyword is not specified on the PANEL tag. This tag will be formatted as TYPE=SINGLE.
ISPC434
ISPC434W: Warning. Line aaaaaaaa of file "bbbbbbbb". Only one occurrence of a SELFLD tag with a TYPE attribute value of MENU, MODEL or TUTOR can be specified on a panel. This tag will be formatted as TYPE=SINGLE.
ISPC435
ISPC435W: Warning. Line aaaaaaaa of file "bbbbbbbb". If an ACTION tag within a SELFLD tag defined as TYPE=TUTOR is coded with the TYPE attribute, the TYPE value must be specified as PANEL. The ACTION tag attribute TYPE=cccccccc is ignored.
ISPC436
ISPC436W: Warning. Line aaaaaaaa of file "bbbbbbbb". If an ACTION tag within a SELFLD tag is coded as TYPE=VAR, the RUN attribute must be specified as "%varname". The ACTION tag will be processed as TYPE=CMD.
ISPC500
ISPC500W: Warning. Multicultural support language literals could not be obtained by ISPF for the requested language. The values for the current session language will be used.
ISPC501
ISPC501W: Warning. Multicultural support language literals could not be obtained by ISPF for the requested language. The default English literals will be used.
ISPC502
ISPC502W: Warning. ISPDTLC received a nonzero return code from EXECIO while processing 'aaaaaaaa'. Refer to the 'bbbbbbbb' documentation for an EXECIO Return code = 'cccccccc'.
ISPC503
ISPC503W: Warning. Data will not replace the 'aaaaaaaa' file because NOREPLACE was specified on invocation.
ISPC503A
ISPC503AW: Warning. Data will not replace the 'aaaaaaaa' file because NOLOGREPL was specified on invocation.
ISPC503B
ISPC503BW: Warning. Data will not replace the 'aaaaaaaa' file because NOLISTREPL was specified on invocation.
ISPC504
ISPC504E: Error. Log file output is directed to the ISPF log file. The ISPF log file is not allocated. Change ISPF Option 0 to allocate the log file or provide an ISPDTLC log file.
ISPC505
ISPC505E: Error. File was not preprocessed by ISPF. Possible reasons may be the Conversion was not successful resulting in no generated output for preprocessing, or the ISPF Preprocessing Utility was unable to successfully preprocess a generated file. Preprocessor input is on work file aaaaaaaa.. Refer to the ISPF log file for more information about the ISPPREP error.
ISPC506
ISPC506E: Error. File 'aaaaaaaa' was not found or was empty.
ISPC507
ISPC507E: Error. Data cannot be written to disk because a name conflict exists between input aaaaaaaa file "bbbbbbbb" and output file cccccccc "dddddddd".
ISPC508
ISPC508W: Warning. Data cannot be written to the file name 'aaaaaaaa'. There is a name conflict with active ISPF files.
ISPC508A
ISPC508AE: Error. You cannot specify the same file name for both the LOG and LIST files.
ISPC509
ISPC509E: Error. Incorrect syntax: 'aaaaaaaa'.
ISPC510
ISPC510E: Error. Incorrect syntax: Option must be "aaaaaaaa" or "bbbbbbbb" but not both.
ISPC511
ISPC511E: Error. Incorrect syntax: aaaaaaaa="bbbbbbbb". Keylist Application ID must be from 1 to 4 characters in length.
ISPC512
ISPC512E: Error. Incorrect syntax: aaaaaaaa="bbbbbbbb" contains character(s) which are not valid. The first character of the Keylist Application ID must be 'cccccccc'or 'dddddddd'. Characters 2 - 4, if entered, must be 'cccccccc', 'dddddddd' or 'eeeeeeee'.
ISPC513
ISPC513W: Warning. Conversion option 'aaaaaaaa' is valid only when running ISPDTLC under ISPF Option 7 (Dialog Test). 'aaaaaaaa' changed to 'bbbbbbbb'.
ISPC514
ISPC514W: Warning. Invocation option "aaaaaaaa" has been removed.
ISPC515
ISPC515W: Warning. Option is not valid: 'aaaaaaaa' changed to 'bbbbbbbb'.
ISPC516
ISPC516W: Warning. ISPF option 0 log file disposition is set to "aaaaaaaa". Log file messages cannot be written to the ISPF log. The "DISK" option is ignored.
ISPC517
ISPC517E: Error. Unable to gain exclusive allocation of "aaaaaaaa". The file "aaaaaaaa" will not be written.
ISPC518
ISPC518E: Error. Conversion Utility message number aaaaaaaa is missing in message file: 'bbbbbbbb'.
ISPC519
ISPC519E: Error. Line aaaaaaaa of file "bbbbbbbb". The ISPF LIBDEF service for "cccccccc" has ended with return code: "dddddddd". "eeeeeeee" will not be updated.
ISPC521
ISPPREP is being called to preprocess aaaaaaaa panel(s) from the work file bbbbbbbb to the panel file cccccccc..
ISPC522
ISPC522W: Warning. Line aaaaaaaa of file "bbbbbbbb". A panel with the "cccccccc" option specified cannot be preprocessed. Panel dddddddd will be saved in ISPF source format.
ISPC523
ISPC523W: Warning. Line aaaaaaaa of file "bbbbbbbb". The ISPF LIBDEF service for "cccccccc" has ended with return code: "dddddddd". Panel "eeeeeeee" will not be displayed.
ISPC524
ISPC524W: Warning. Line aaaaaaaa of file "bbbbbbbb". The ISPF DISPLAY service has ended with return code: "cccccccc". The error text is: "dddddddd". Panel "eeeeeeee" will be displayed using the VIEW service.
ISPC525
The "aaaaaaaa" file cannot be saved because no aaaaaaaa file records have been created.
ISPC526
The "aaaaaaaa" file was specified as a sequential format file. All records have previously been written.
ISPC527
The "aaaaaaaa" file was defaulted to the ISPF aaaaaaaa file. All records have previously been written.
ISPC528
There are no records available to be saved to the aaaaaaaa file.
ISPC529
The output library "aaaaaaaa" is being updated with member "bbbbbbbb".
ISPC530
ISPC530W: Warning. Line aaaaaaaa of file "bbbbbbbb". The record length for output panels is not for fixed length records of 80 bytes. The output MACLIB cannot be used. The panel will be written to "cccccccc".
ISPC533
Member processing is supported only for filetype 'MACLIB'.
ISPC534
Table for gml MACLIB members not created.
ISPC535
Gml MACLIB member not added to member table.
ISPC536
Selection code entered is not valid.
ISPC537
No members match the specified pattern.
ISPC560
ISPC560W: Warning. Line aaaaaaaa of file "bbbbbbbb". There is a conflict in the use of "cccccccc" with "dddddddd". "dddddddd" is being reset to "eeeeeeee".
ISPC561
ISPC561W: Warning. Line aaaaaaaa of file "bbbbbbbb". The "cccccccc" tag and its attributes have been removed from the tag language. cccccccc will be ignored for this conversion and will be syntax checked only. The cccccccc tag should be removed from the tag source as it is no longer required.
ISPC562
ISPC562W: Warning. Line aaaaaaaa of file "bbbbbbbb". "cccccccc=dddddddd" is not defined. Default values will be set.
ISPC563
ISPC563W: Warning. Line aaaaaaaa of file "bbbbbbbb". The "cccccccc" tag and its attributes will be ignored during the conversion process and syntax checked only. Text following the "cccccccc" tag will appear as normal text.
ISPC564
ISPC564W: Warning. Line aaaaaaaa of file "bbbbbbbb". There is a conflict in the use of "cccccccc" with "dddddddd". There is not enough space to format the text "dddddddd". Reduce the text to eeeeeeee bytes, or increase ffffffff. to gggggggg..
ISPC565
ISPC565W: Warning. Line aaaaaaaa of file "bbbbbbbb". Tag "cccccccc" and its attributes will be ignored in the conversion process.
ISPC566
ISPC566W: Warning. Line aaaaaaaa of file "bbbbbbbb". Keyword "cccccccc=dddddddd" found on the eeeeeeee tag will be ignored in the conversion process but will be syntax checked.
ISPC568
ISPC568W: Warning. Line aaaaaaaa of file "bbbbbbbb". Comment ending delimiter "cccccccc" should be changed to "-->".
ISPC569
ISPC569W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc attribute is missing for the dddddddd tag. The conversion process will use a default value. Please update the tag source file.
ISPC570
ISPC570W: Warning. Line aaaaaaaa of file "bbbbbbbb". Keyword "cccccccc" found on the dddddddd tag will be ignored in the conversion process but will be syntax checked.
ISPC571
ISPC571W: Warning. Line aaaaaaaa of file "bbbbbbbb". The attribute value "cccccccc" is not valid when the dddddddd tag is found in this nesting context.
ISPC572
ISPC572W: Warning. Line aaaaaaaa of file "bbbbbbbb". The attribute "PMTWIDTH=cccccccc" does not provide enough space to format the ISPF prompt indicator "===>". "PMTFMT=ISPF" will be ignored.
ISPC573
ISPC573W: Warning. Line aaaaaaaa of file "bbbbbbbb". There is not enough space to format: "cccccccc".
ISPC574
ISPC574W: Warning. Line aaaaaaaa of file "bbbbbbbb". There is a conflict in the use of "cccccccc" with "dddddddd". There is not enough space to format the text "eeeeeeee".
ISPC577
ISPC577W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc="dddddddd" maximum length is eeeeeeee character(s). cccccccc will be truncated to "ffffffff".
ISPC578
ISPC578W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc="dddddddd" minimum length is eeeeeeee character(s). cccccccc will be set to "ffffffff".
ISPC579
ISPC579W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc="dddddddd" contains character(s) which are not valid. cccccccc will be set to "eeeeeeee".
ISPC580
ISPC580E: Error. Line aaaaaaaa of file "bbbbbbbb". cccccccc="dddddddd" must be an integer.
ISPC581
ISPC581W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc="dddddddd" must be an integer. cccccccc will be set to "eeeeeeee".
ISPC583
ISPC583W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc="dddddddd" must be an integer eeeeeeee.. cccccccc will be set to "eeeeeeee".
ISPC584
ISPC584E: Error. Line aaaaaaaa of file "bbbbbbbb". cccccccc="dddddddd" must be an integer within a range of eeeeeeee to ffffffff..
ISPC585
ISPC585W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc="dddddddd" must be an integer within a range of eeeeeeee to ffffffff.. cccccccc will be set to "gggggggg".
ISPC586
ISPC586E: Error. Line aaaaaaaa of file "bbbbbbbb". Incorrect value "cccccccc" specified for dddddddd="cccccccc".
ISPC587
ISPC587W: Warning. Line aaaaaaaa of file "bbbbbbbb". Incorrect value "cccccccc" specified for dddddddd="cccccccc". dddddddd will be set to default "eeeeeeee".
ISPC588
ISPC588W: Warning. Line aaaaaaaa of file "bbbbbbbb". Duplicate field names are not permitted by ISPF. cccccccc="dddddddd" has already been defined as a panel field name. cccccccc will be set to "eeeeeeee".
ISPC589
ISPC589W: Warning. Line aaaaaaaa of file "bbbbbbbb". Duplicate field names are not permitted by ISPF. cccccccc has already been defined as a panel help field name. cccccccc will be ignored.
ISPC600
ISPC600E: Error. Line aaaaaaaa of file "bbbbbbbb". Multiple Action Bars not allowed in panel definition.
ISPC601
ISPC601E: Error. Line aaaaaaaa of file "bbbbbbbb". No Action Bar Choices defined within AB Tag.
ISPC602
ISPC602W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc tag "dddddddd" attribute value cannot be used without a "eeeeeeee" attribute value.
ISPC603
ISPC603W: Warning. Line aaaaaaaa of file "bbbbbbbb". The RUN option for the ACTION tag can only be nested within the PDC tag or within the CHOICE tag when a TYPE of MENU, MODEL or TUTOR has been specified on the SELFLD tag.
ISPC604
ISPC604W: Warning. Line aaaaaaaa of file "bbbbbbbb". Required cccccccc "dddddddd" was not provided and may affect processing.
ISPC605A
ISPC605AW: Warning. Line aaaaaaaa of file "bbbbbbbb". The ABC tag limit of "cccccccc" has been exceeded. Remaining action bar choices will be ignored.
ISPC605B
ISPC605BW: Warning. Line aaaaaaaa of file "bbbbbbbb". The PDC tag limit of "cccccccc" has been exceeded. Remaining pull-down choices will be ignored.
ISPC605C
ISPC605CW: Warning. Line aaaaaaaa of file "bbbbbbbb". The ASSIGNI tag limit of "cccccccc" has been exceeded. Remaining ASSIGNI tags will be ignored.
ISPC605D
ISPC605DW: Warning. Line aaaaaaaa of file "bbbbbbbb". The XLATI tag limit of "cccccccc" has been exceeded. Remaining XLATI tags will be ignored.
ISPC606
ISPC606W: Warning. Line aaaaaaaa of file "bbbbbbbb". Cursor Position "cccccccc" exceeds the length (dddddddd) of the "eeeeeeee" field on the ffffffff tag. The conversion utility will not use the Cursor Position. ISPF will default the position to 1.
ISPC607
ISPC607W: Warning. Line aaaaaaaa of file "bbbbbbbb". A panel has been defined with either a Width > 80 and/or a Depth > 24 and will require a device larger than 24x80 for display of the panel.
ISPC608
ISPC608W: Warning. Line aaaaaaaa of file "bbbbbbbb". No text encountered following the cccccccc tag.
ISPC609
ISPC609W: Warning. Line aaaaaaaa of file "bbbbbbbb". No text encountered following the TOPINST tag.
ISPC610
ISPC610W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc "dddddddd" larger than the maximum allowed. "dddddddd" will be truncated to eeeeeeee bytes.
ISPC611
ISPC611W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cursor field "cccccccc" specified on the PANEL tag was not matched to any field found on the panel.
ISPC612
ISPC612W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cursor row will be set to "cccccccc" as requested on the dddddddd tag. "cccccccc" may not be a valid value. The Cursor Index will be checked by ISPF for valid position.
ISPC613
ISPC613W: Warning. Line aaaaaaaa of file "bbbbbbbb". The attribute "cccccccc=dddddddd" will be ignored by the conversion utility because the CURSOR attribute has not been specified.
ISPC614
ISPC614W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cursor position "cccccccc" specified on the PANEL tag was not set for any field found on the panel.
ISPC615
ISPC615W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cursor index to table row "cccccccc" specified on the PANEL tag was not set for any field found on the panel.
ISPC616
ISPC616W: Warning. Line aaaaaaaa of file "bbbbbbbb". Duplicate Action Bar Choice description is not allowed. ABC will not be included on Action Bar.
ISPC617
ISPC617W: Warning. Line aaaaaaaa of file "bbbbbbbb". No pull-down choice(s) found for Action Bar Choice being processed. ABC will not be included on Action Bar.
ISPC618
ISPC618W: Warning. Line aaaaaaaa of file "bbbbbbbb". Undefined value "cccccccc" specified for "dddddddd=cccccccc". cccccccc has not been defined in a dddddddd tag.
ISPC618A
ISPC618AW: Warning. Line aaaaaaaa of file "bbbbbbbb". Undefined value "cccccccc" specified for "dddddddd=cccccccc". "cccccccc" has not been defined in a eeeeeeee tag.
ISPC619
ISPC619W: Warning. Line aaaaaaaa of file "bbbbbbbb". Duplicate cccccccc ID "dddddddd" specified for "eeeeeeee=dddddddd". Only one cccccccc entry is accepted for each ID name. This entry is rejected and the first one processed will be used.
ISPC620
ISPC620E: Error. Line aaaaaaaa of file "bbbbbbbb". The format for the DOCTYPE statement is not valid.
ISPC621
ISPC621E: Error. Line aaaaaaaa of file "bbbbbbbb". Parentheses or brackets are required for enclosing ENTITY definition(s).
ISPC622
ISPC622E: Error. Line aaaaaaaa of file "bbbbbbbb". No ending comment delimiter (-->) found during ENTITY processing of source file record "cccccccc".
ISPC623
ISPC623E: Error. Line aaaaaaaa of file "bbbbbbbb". ENTITY Symbol name expected.
ISPC624
ISPC624E: Error. Line aaaaaaaa of file "bbbbbbbb". Illegal ENTITY symbol value encountered.
ISPC625
ISPC625E: Error. Line aaaaaaaa of file "bbbbbbbb". Each ENTITY definition must be enclosed within either single(') or double(") quotes and must be ended with '>'. Check for missing or mismatched quote delimiters and verify that each ENTITY is ended with '>'.
ISPC626
ISPC626E: Error. Line aaaaaaaa of file "bbbbbbbb". No <!ENTITY or <:ENTITY definition encountered or ENTITY definition(s) not ended with a close parenthesis or close bracket character.
ISPC627
ISPC627E: Error. Line aaaaaaaa of file "bbbbbbbb". Recursive use of ENTITY file "cccccccc".
ISPC628
ISPC628W: Warning. Line aaaaaaaa of file "bbbbbbbb". Duplicate ENTITY name "cccccccc" found. This entry will be ignored and the first use of name "cccccccc" for value "dddddddd" will be used.
ISPC629
ISPC629W: Warning. Line aaaaaaaa of file "bbbbbbbb". The CDATA keyword cannot be used with a parameter entity definition and will be ignored.
ISPC630
ISPC630W: Warning. Line aaaaaaaa of file "bbbbbbbb". The ENTITY "cccccccc" will override the system defined entity value dddddddd with the new value eeeeeeee..
ISPC631
ISPC631W: Warning. Line aaaaaaaa of file "bbbbbbbb". The maximum number of single choices allowed within the limit of "ENTWIDTH=cccccccc" has been exceeded. The remaining sequentially numbered CHOICE tags will be ignored.
ISPC631A
ISPC631AW: Warning. Line aaaaaaaa of file "bbbbbbbb". The maximum number of Tutorial choices allowed within the ISPF limit of 100 has been exceeded. The remaining CHOICE tags will be ignored.
ISPC632
ISPC632W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc="dddddddd" will not fit within the remaining space available of eeeeeeee character(s). cccccccc will be set to "ffffffff".
ISPC633
ISPC633W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc tag attribute dddddddd is not valid unless the eeeeeeee attribute is also specified. dddddddd=ffffffff will not be used.
ISPC634
ISPC634W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc tag attribute "dddddddd" is not valid unless the "eeeeeeee" attribute is also specified. "dddddddd" will not be used.
ISPC635
ISPC635W: Warning. The aaaaaaaa option is not valid unless the bbbbbbbb option is also specified. aaaaaaaa will not be used.
ISPC636
ISPC636W: Warning. Line aaaaaaaa of file "bbbbbbbb". The "cccccccc=dddddddd" attribute specification on the "eeeeeeee" tag conflicts with the "ffffffff" conversion option. The attribute value is accepted but may cause inconsistent results when the panel is displayed.
ISPC637
ISPC637W: Warning. Line aaaaaaaa of file "bbbbbbbb". The "cccccccc=dddddddd" attribute specification on the "eeeeeeee" tag is a reserved keyword. The attribute value cannot be used and is reset to blank.
ISPC638
ISPC638W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc tag attribute dddddddd is not valid unless the eeeeeeee conversion option is also specified. dddddddd=ffffffff will not be used.
ISPC639
ISPC639W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc tag attribute "dddddddd" is not valid unless the "eeeeeeee" conversion option is also specified. "dddddddd" will not be used.
ISPC640
ISPC640W: Warning. Line aaaaaaaa of file "bbbbbbbb". A PDSEP tag has been found in the DTL source before the first PDC tag has been processed. The PDSEP tag is ignored.
ISPC641
ISPC641W: Warning. Line aaaaaaaa of file "bbbbbbbb". A PDSEP tag has been found in the DTL source after the last PDC tag has been processed. The PDSEP tag is ignored.
ISPC642
ISPC642W: Warning. Line aaaaaaaa of file "bbbbbbbb". Multiple PDSEP tags have been found in the DTL source between PDC tags. The first PDSEP tag is accepted. Additional PDSEP tags are ignored.
ISPC643
ISPC643W: Warning. Line aaaaaaaa of file "bbbbbbbb". The combined specification of accelerator key values for ACC1, ACC2, and ACC3 exceed the implementation limit of 30 bytes. The accelerator key description "cccccccc" will be discarded.
ISPC644
ISPC644W: Warning. Line aaaaaaaa of file "bbbbbbbb". "cccccccc" is not a valid single accelerator key. Valid values are: INSERT, DELETE, BACKSPACE, and F1 through F12. The accelerator key description "cccccccc" will be discarded.
ISPC645
ISPC645W: Warning. Line aaaaaaaa of file "bbbbbbbb". "cccccccc" is a duplicate of a previously specified accelerator key. The accelerator key description "cccccccc" will be discarded.
ISPC646
ISPC646W: Warning. Line aaaaaaaa of file "bbbbbbbb". "cccccccc" is not a valid accelerator key combination. The accelerator key description "cccccccc" will be discarded.
ISPC647
ISPC647W: Warning. Line aaaaaaaa of file "bbbbbbbb". The "cccccccc" attribute has been specified without the previous "dddddddd" attribute(s). The accelerator key description will be created using the available "ACCn" attributes in numerical order.
ISPC648
ISPC648W: Warning. Line aaaaaaaa of file "bbbbbbbb". "cccccccc" is a duplicate of a previously specified accelerator key combination. The accelerator key description "cccccccc" will be discarded.
ISPC700
ISPC700E: Error. Line aaaaaaaa of file "bbbbbbbb". Displayable lines have been exceeded. Panel will not be saved.
ISPC701
ISPC701W: Warning. Line aaaaaaaa of file "bbbbbbbb". Panel width has been exceeded. cccccccc field data will be truncated.
ISPC702
ISPC702W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc tag was specified without the NAME or DATAVAR keyword and will cause the absence of the field on the panel.
ISPC703A
ISPC703AW: Warning. Line aaaaaaaa of file "bbbbbbbb". Entry width "cccccccc" will not fit within the Panel width and will be changed to "dddddddd".
ISPC703B
ISPC703BW: Warning. Line aaaaaaaa of file "bbbbbbbb". Prompt width "cccccccc" will not fit within the Panel width and will be changed to "dddddddd".
ISPC703C
ISPC703CW: Warning. Line aaaaaaaa of file "bbbbbbbb". Choice width "cccccccc" will not fit within the Panel width and will be changed to "dddddddd".
ISPC703D
ISPC703DW: Warning. Line aaaaaaaa of file "bbbbbbbb". Description width "cccccccc" will not fit within the Panel width and will be changed to "dddddddd".
ISPC704A
ISPC704AW: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc tag entry width value is "0" and may affect the display of the entry field.
ISPC704B
ISPC704BW: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc tag prompt width value is "0" and may affect the display of the prompt field.
ISPC704C
ISPC704CW: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc tag description width value is "0" and may affect the display of the description field.
ISPC705A
ISPC705AW: Warning. Line aaaaaaaa of file "bbbbbbbb". The "SELWIDTH" value of the SELFLD tag is not large enough to contain the entry field.
ISPC705B
ISPC705BW: Warning. Line aaaaaaaa of file "bbbbbbbb". The "SELWIDTH" value of the SELFLD tag is not large enough to contain the choice field.
ISPC706
ISPC706W: Warning. Line aaaaaaaa of file "bbbbbbbb". Both ENTWIDTH and COLWIDTH were specified on the LSTCOL tag. The value of "cccccccc" will be used as the column width.
ISPC707
ISPC707W: Warning. Line aaaaaaaa of file "bbbbbbbb". Conflict between "REQUIRED=NO" with a "MSG" specified.
ISPC708
ISPC708W: Warning. Line aaaaaaaa of file "bbbbbbbb". Conflict between "REQUIRED" keyword value or "MSG" keyword value specified for an output field. These keywords should not be used with USAGE=OUT.
ISPC710
ISPC710W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc tag attribute "dddddddd" default is set to a width of "eeeeeeee" and may affect the display of fields.
ISPC711
ISPC711W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc tag "dddddddd" attribute value is less than the ISPF defined minimum allowable width of 20 characters for a scrollable area. The scrollable area will not be formatted.
ISPC712
ISPC712E: Error. Line aaaaaaaa of file "bbbbbbbb". Keyword "NAME" must be specified with "TYPE=SINGLE".
ISPC713
ISPC713W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc attribute will be ignored in context of SELFLD TYPE=dddddddd..
ISPC714
ISPC714E: Error. Line aaaaaaaa of file "bbbbbbbb". NAME attribute must be specified on CHOICE tag if SELFLD TYPE=MULTI.
ISPC715A
ISPC715AW: Warning. Line aaaaaaaa of file "bbbbbbbb". Duplicate "CHECKVAR" name "cccccccc" found on a CHOICE tag. The "cccccccc" variable name cannot be repeated for more than one CHOICE if SELFLD TYPE=MULTI. This name will be accepted but results are unpredictable.
ISPC715B
ISPC715BW: Warning. Line aaaaaaaa of file "bbbbbbbb". Duplicate "MATCH" value "cccccccc" used on a CHOICE tag. The "cccccccc" value cannot be repeated for more than one CHOICE if SELFLD TYPE=SINGLE. This value will be accepted but results are unpredictable.
ISPC716
ISPC716W: Warning. Line aaaaaaaa of file "bbbbbbbb". Inconsistent CHECKVAR value found on CHOICE tag. The CHECKVAR variable name must be the same for all CHOICE tags if SELFLD TYPE=SINGLE. This name will be accepted but results are unpredictable.
ISPC717
ISPC717W: Warning. Line aaaaaaaa of file "bbbbbbbb". Inconsistent use of MENU keyword on the PANEL tag. No selection choice list was created on panel "cccccccc".
ISPC718
ISPC718E: Error. Line aaaaaaaa of file "bbbbbbbb". More than one "cccccccc" tag found within "dddddddd". Only 1 "cccccccc" tag can be used within each "dddddddd" tag.
ISPC719A
ISPC719AW: Warning. Line aaaaaaaa of file "bbbbbbbb". Inconsistent use of Mnemonics within "cccccccc" entries. CUA requires that all "cccccccc" entries must have a Mnemonic or none can.
ISPC719B
ISPC719BW: Warning. Line aaaaaaaa of file "bbbbbbbb". A duplicate mnemonic value has been found during processing of a "cccccccc" tag. Only one mnemonic may be specified for each "cccccccc". Mnemonic characters used within a set of tags (ABC, PDC or CHOICE) must be unique.
ISPC719C
ISPC719CW: Warning. Line aaaaaaaa of file "bbbbbbbb". A DBCS mnemonic value has been found within a "cccccccc" tag. Mnemonic characters must be single byte format. The specified mnemonic character will not be used.
ISPC719D
ISPC719DW: Warning. Line aaaaaaaa of file "bbbbbbbb". The mnemonic "cccccccc" specified for the "dddddddd" tag description is not valid and will not be used. The mnemonic character must be in the range "A-Z", "a-z", or "0-9".
ISPC719E
ISPC719EW: Warning. Line aaaaaaaa of file "bbbbbbbb". A unique mnemonic could not be generated for the "cccccccc" tag description "dddddddd". Use the Mnemonic tag to provide a unique mnemonic character.
ISPC719F
ISPC719FW: Warning. Line aaaaaaaa of file "bbbbbbbb". A duplicate mnemonic value has been found during processing of a "cccccccc" tag. The conversion utility will attempt to automatically select a mnemonic character to replace the specified value. Review the generated panel and if the resulting mnemonic selection is unsatisfactory, add Mnemonic tags to remove the duplicate condition.
ISPC720
ISPC720W: Warning. Line aaaaaaaa of file "bbbbbbbb". The tag language has been changed for the cccccccc tag. The attribute "dddddddd" has been replaced by "eeeeeeee". The conversion utility will use the value of "dddddddd" as "eeeeeeee".
ISPC721
ISPC721W: Warning. Line aaaaaaaa of file "bbbbbbbb". The tag language has been changed for the cccccccc tag. The attribute value "dddddddd" has been replaced by "eeeeeeee". The conversion utility will accept the entry "ffffffff=dddddddd". However, you should change your source to use the new attribute value ("ffffffff=eeeeeeee").
ISPC722
ISPC722W: Warning. Line aaaaaaaa of file "bbbbbbbb". The tag language has been changed for the cccccccc tag. The attribute value "dddddddd" has been removed from the cccccccc tag and will be ignored in this conversion. You should update your source file to remove the "eeeeeeee=dddddddd" entry.
ISPC723
ISPC723W: Warning. Line aaaaaaaa of file "bbbbbbbb". The tag language has been changed for the cccccccc tag. The attribute "dddddddd" has been removed from the cccccccc tag and will be ignored in this conversion. You should remove the dddddddd reference from your tag source.
ISPC729
ISPC729W: Warning. Line aaaaaaaa of file "bbbbbbbb". The "cccccccc" attribute has been specified on a "dddddddd" tag but the attribute "eeeeeeee" was not specified (or is not valid). The "cccccccc" attribute will be reset to blank.
ISPC730
ISPC730W: Warning. Line aaaaaaaa of file "bbbbbbbb". The required attribute "DATAVAR" is missing from the DTAFLD tag. The "NAME" value will become the panel field name. You should add the "DATAVAR" attribute to your tag source. (It is recommended that you code both attributes with the same value.)
ISPC731
ISPC731W: Warning. Line aaaaaaaa of file "bbbbbbbb". Both "DATAVAR" and "NAME" are specified on the DTAFLD tag, but they have different values. The "DATAVAR" value will become the panel field name. It is recommended that you code both attributes with the same value.
ISPC732
ISPC732W: Warning. Line aaaaaaaa of file "bbbbbbbb". The "AUTOTAB=YES" attribute is in conflict with "USAGE" on the cccccccc tag. AUTOTAB will be changed to "NO".
ISPC733
ISPC733W: Warning. Line aaaaaaaa of file "bbbbbbbb". The "cccccccc" attribute is not valid without a valid "DEPTH" value. The "cccccccc" attribute will be ignored.
ISPC734
ISPC734W: Warning. Line aaaaaaaa of file "bbbbbbbb". The "EXTEND" attribute has already been specified for this panel or "EXTEND" is not valid in this tag nesting configuration. The "EXTEND" attribute will be ignored.
ISPC735
ISPC735W: Warning. Line aaaaaaaa of file "bbbbbbbb". The "SCROLL" attribute has already been specified for this panel either on an enclosing AREA tag or on another DA tag. The "SCROLL" attribute for this DA tag will be ignored.
ISPC736
ISPC736E: Error. Line aaaaaaaa of file "bbbbbbbb". The "cccccccc" attribute has been specified for this panel and is in conflict with table display. The panel will not be saved.
ISPC737
ISPC737W: Warning. Line aaaaaaaa of file "bbbbbbbb". Both "PAD" and "PADC" attributes have been specified on the "cccccccc" tag. The value of "PADC" will be used.
ISPC738A
ISPC738AW: Warning. Line aaaaaaaa of file "bbbbbbbb". The "EXTEND=ON" attribute specification is not valid on a "cccccccc" tag within a horizontal region. The "EXTEND" attribute will be ignored.
ISPC738B
ISPC738BW: Warning. Line aaaaaaaa of file "bbbbbbbb". The "EXTEND=ON" attribute specification is not valid on a "cccccccc" tag formatted horizontally. The "EXTEND" attribute will be ignored.
ISPC738C
ISPC738CW: Warning. Line aaaaaaaa of file "bbbbbbbb". The "EXTEND=FORCE" attribute specification is coded on a "cccccccc" tag within a horizontal region. The resulting panel will not display unless the extendable portion of the panel is below all other fields or text on the panel.
ISPC738D
ISPC738DW: Warning. Line aaaaaaaa of file "bbbbbbbb". The "EXTEND=FORCE" attribute specification is coded on a "cccccccc" tag formatted horizontally. The resulting panel will not display unless the extendable portion of the panel is below all other fields or text on the panel.
ISPC739
ISPC739W: Warning. Line aaaaaaaa of file "bbbbbbbb". The "cccccccc" attribute has been specified on a previous tag. The "cccccccc" attribute value "dddddddd" will be reset to blank.
ISPC740
ISPC740W: Warning. Line aaaaaaaa of file "bbbbbbbb". The "cccccccc" tag "PMTWIDTH" value is too small to allow for leader dots.
ISPC741
ISPC741W: Warning. Line aaaaaaaa of file "bbbbbbbb". A DIVIDER within a horizontal region with GUTTER=1 must specify TYPE=NONE. TYPE is reset to NONE.
ISPC742
ISPC742W: Warning. Line aaaaaaaa of file "bbbbbbbb". The NOENDATTR attribute on the DIVIDER tag is valid only when the GUTTER value is 2 or more. NOENDATTR is ignored.
ISPC743
ISPC743W: Warning. Line aaaaaaaa of file "bbbbbbbb". DEPTH="cccccccc" will exceed the remaining panel depth due to prompt text formatting. DEPTH will be reset to "dddddddd".
ISPC744
ISPC744W: Warning. Line aaaaaaaa of file "bbbbbbbb". There is insufficient remaining depth to format a scrollable area.
ISPC745
ISPC745W: Warning. Line aaaaaaaa of file "bbbbbbbb". The "CHOICECOLS=cccccccc" value of the SELFLD tag does not provide enough columns to sub-divide all of the CHOICE tags. The remaining CHOICE tags will be placed in the last column available for the current SELFLD tag.
ISPC746
ISPC746E: Error. Line aaaaaaaa of file "bbbbbbbb". The "CHOICECOLS=cccccccc" value of the SELFLD tag specified more scrollable columns than the "CHOICEDEPTH=dddddddd" value could create from the number of CHOICE tags processed. This condition results in a mismatch between defined scrollable areas in the panel )BODY section and )AREA sections generated. The panel will not be saved.
ISPC747
ISPC747W: Warning. Line aaaaaaaa of file "bbbbbbbb". The "CHOICECOLS=cccccccc" value of the SELFLD tag specified more columns than the "CHOICEDEPTH=dddddddd" value could create from the number of CHOICE tags processed.
ISPC748
ISPC748W: Warning. Line aaaaaaaa of file "bbbbbbbb". The panel line "cccccccc" contains EXPAND characters which cannot operate due to horizontal region formatting.
ISPC749
ISPC749W: Warning. Line aaaaaaaa of file "bbbbbbbb". The NOENDATTR attribute on the DIVIDER tag is valid only when the DIVIDER tag is placed within a horizontal region. NOENDATTR is ignored.
ISPC749A
ISPC749AW: Warning. Line aaaaaaaa of file "bbbbbbbb". The "cccccccc" attribute on the DIVIDER tag is valid only when the DIVIDER tag is placed within a vertical region. "cccccccc" is ignored.
ISPC750
ISPC750W: Warning. Line aaaaaaaa of file "bbbbbbbb". The special ENTITY "cccccccc" requires dddddddd bytes of space. The DTL source file has specified "PMTWIDTH" as eeeeeeee bytes.
ISPC751
ISPC751W: Warning. Line aaaaaaaa of file "bbbbbbbb". The ENTITY name "cccccccc" maximum length is dddddddd byte(s). "cccccccc" will be truncated to "eeeeeeee".
ISPC752
ISPC752W: Warning. Line aaaaaaaa of file "bbbbbbbb". The ENTITY name "cccccccc" minimum length is dddddddd character(s). cccccccc will be set to blank.
ISPC753
ISPC753W: Warning. Line aaaaaaaa of file "bbbbbbbb". The ENTITY name "cccccccc" contains character(s) which are not valid. cccccccc will be set to blank. Parameter and System entity names must be from 1 to 8 bytes. Other entity names can be from 1 to 17 bytes. One or more underscore ("_") bytes must be included in names longer than 8 bytes.
ISPC760
ISPC760W: Warning. Line aaaaaaaa of file "bbbbbbbb". Unable to create a new cursor group for the specification of "CSRGRP=YES". CSRGRP is reset to "NO".
ISPC761
ISPC761W: Warning. Line aaaaaaaa of file "bbbbbbbb". The ")LIST" section entries referenced by "LISTREF=cccccccc" are not found. The LISTREF attribute is ignored. Panel formatting may be affected.
ISPC762
ISPC762W: Warning. Line aaaaaaaa of file "bbbbbbbb". The ")LIST" section name specified by "LISTREF=cccccccc" is a duplicate of a previous name. "cccccccc" is changed to "dddddddd". Panel formatting may be affected.
ISPC763
ISPC763W: Warning. Line aaaaaaaa of file "bbbbbbbb". The CHOICE text "cccccccc" is too long to display as one line. ISPF does not support multiple lines of panel text for "LISTTYPE=dddddddd". The LISTTYPE attribute is ignored. This SELFLD tag group will be formatted as a numbered single-choice list.
ISPC764
ISPC764W: Warning. Line aaaaaaaa of file "bbbbbbbb". The CHOICE text formatting width of "cccccccc" exceeds the ISPF maximum for "LISTTYPE=dddddddd". The formatting width is reset to "99".
ISPC765
ISPC765W: Warning. Line aaaaaaaa of file "bbbbbbbb". The specified "LISTDEPTH=cccccccc" value may cause part of the listbox choices or the horizontal scroll bar for the listbox to overlay other panel fields. Review the resulting panel for proper format.
ISPC766
ISPC766W: Warning. Line aaaaaaaa of file "bbbbbbbb". There is only one formatted CHOICE text line which may cause the horizontal scroll bar for the listbox to overlay other panel fields. Review the resulting panel for proper format.
ISPC767A
ISPC767AW: Warning. Line aaaaaaaa of file "bbbbbbbb". A CHOICE tag that specified the UNAVAIL attribute has also specified the RP (Reference Phrase) tag as part of the CHOICE tag text. ISPF does not support Reference Phrases on unavailable choices. The UNAVAIL (and UNAVAILMAT) attribute specifications are ignored.
ISPC767B
ISPC767BW: Warning. Line aaaaaaaa of file "bbbbbbbb". A CHOICE tag that specified the UNAVAIL attribute has also specified the HP (Emphasized Text) tag as part of the CHOICE tag text. ISPF does not support Emphasized Text on unavailable choices. The UNAVAIL (and UNAVAILMAT) attribute specifications are ignored.
ISPC768
ISPC768W: Warning. Line aaaaaaaa of file "bbbbbbbb". A CHOICE tag that is used to build a COMBO list cannot have user defined "cccccccc" tag text. The "cccccccc" tag is ignored.
ISPC769
ISPC769W: Warning. Line aaaaaaaa of file "bbbbbbbb". The number of SELFLD tags containing unavailable choices has exceeded the maximum of 36. Remaining SELFLD tags will use the "ZS#" prefix for variable names used for unavailable choice text fields. If duplicate field names result, the panel cannot be displayed.
ISPC770
ISPC770W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc tag text "dddddddd" is not valid when the TYPE=NONE attribute is either specified or defaulted. The text is ignored.
ISPC771
ISPC771W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc tag text "dddddddd" is not valid unless the FORMAT attribute is specified. The text is ignored.
ISPC772
ISPC772W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc tag text "dddddddd" is not valid within a horizontal region. The text is ignored.
ISPC773
ISPC773W: Warning. Line aaaaaaaa of file "bbbbbbbb". The CHDIV tag is not supported for selection lists that specify "cccccccc". The tag is syntax checked but will be ignored during panel formatting.
ISPC774
ISPC774W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc tag attribute "dddddddd" is not valid when the cccccccc tag is used with the eeeeeeee tag. "dddddddd=ffffffff" will not be used.
ISPC775A
ISPC775AW: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc tag attribute "dddddddd" is not valid when the cccccccc tag is used within a horizontal region. "dddddddd" will not be used.
ISPC775B
ISPC775BW: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc tag attribute "dddddddd" is not valid when the cccccccc tag is used within a scrollable area. "dddddddd" will not be used.
ISPC776
ISPC776W: Warning. Line aaaaaaaa of file "bbbbbbbb". The definition for "IMAPNAME=cccccccc" specifying a blank text string is not valid. Image "cccccccc" will not be used.
ISPC777
ISPC777W: Warning. Line aaaaaaaa of file "bbbbbbbb". The definition for "IMAPNAME=cccccccc" specifying the text "dddddddd" is a duplicate of a previously defined image text string. Image "cccccccc" will not be used.
ISPC778
ISPC778W: Warning. There is a conflict in the use of "aaaaaaaa" as a panel data set with "bbbbbbbb". "bbbbbbbb" is being reset to "cccccccc".
ISPC779
ISPC779W: Warning. The invocation option NODSNCHK has been changed to DSNCHK because an EXECIO error occurred.
ISPC780
ISPC780W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc tag attribute dddddddd is not valid unless the cccccccc tag is nested within a eeeeeeee tag. dddddddd=ffffffff will not be used.
ISPC781
ISPC781W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc tag attribute dddddddd is not valid when the eeeeeeee attribute is also specified. dddddddd=ffffffff will not be used.
ISPC782
ISPC782W: Warning. Line aaaaaaaa of file "bbbbbbbb". The column is not wide enough to display both the fields associated with the cccccccc tag attributes dddddddd and eeeeeeee. dddddddd=ffffffff and eeeeeeee=gggggggg will not be used.
ISPC783
ISPC783W: Warning. Line aaaaaaaa of file "bbbbbbbb". The column is not wide enough to display the field associated with the cccccccc tag attribute dddddddd. dddddddd=eeeeeeee will not be used.
ISPC784
ISPC784W: Warning. Line aaaaaaaa of file "bbbbbbbb". Only a single SCRFLD tag can be nested in a cccccccc tag. This SCRFLD tag definition will not be used.
ISPC785
ISPC785W: Warning. Line aaaaaaaa of file "bbbbbbbb". The SCRFLD tag attribute cccccccc cannot be specified for a field defined immediately within a horizontal region. cccccccc=dddddddd will not be used.
ISPC786
ISPC786W: Warning. Line aaaaaaaa of file "bbbbbbbb". The variable cccccccc specified with the SCRFLD tag attribute LCOLIND will not be displayed for the dddddddd field because LCOLIND=cccccccc has already been specified on an SCRFLD tag nested in another LSTCOL or DTAFLD tag.
ISPC787
ISPC787W: Warning. Line aaaaaaaa of file "bbbbbbbb". Region width is too small to include indicator "cccccccc" on the same line as the DTAFLD field. FLDSPOS is set to BELOW.
ISPC801
ISPC801E: Error. Line aaaaaaaa of file "bbbbbbbb". cccccccc and dddddddd tags were not matched, or the number of cccccccc tags does not match the number of entries specified by the TSIZE attribute.
ISPC801A
ISPC801AE: Error. Line aaaaaaaa of file "bbbbbbbb". The number of cccccccc tags does not match the number of entries specified by the TSIZE attribute. Check for a missing "cccccccc" tag.
ISPC801B
ISPC801BE: Error. Line aaaaaaaa of file "bbbbbbbb". The number of cccccccc tags does not match the number of entries specified by the TSIZE attribute. Check for an extra "cccccccc" tag.
ISPC801C
ISPC801CE: Error. Line aaaaaaaa of file "bbbbbbbb". A description tag is missing in a multiple term group. Check for a missing "cccccccc" tag.
ISPC802
ISPC802E: Error. Line aaaaaaaa of file "bbbbbbbb". Processing for tag cccccccc has generated attribute "dddddddd" which is outside of the range of attribute values available to ISPDTLC. Panel will not be saved.
ISPC803
ISPC803E: Error. The list nesting level exceeds the maximum allowed (aaaaaaaa) for the bbbbbbbb tag.
ISPC804
ISPC804E: Error. Line aaaaaaaa of file "bbbbbbbb". The maximum number (cccccccc) of panel attributes has been exceeded. Panel will not be saved.
ISPC805
ISPC805W: Warning. Line aaaaaaaa of file "bbbbbbbb". Multiple LSTFLD tag (and nested tags) will be syntax checked only and will be discarded by the conversion utility.
ISPC806
ISPC806E: Error. Line aaaaaaaa of file "bbbbbbbb". Conflict between attribute being generated for the "cccccccc" tag and a previously defined attribute. Panel will not be saved.
ISPC807
ISPC807E: Error. Line aaaaaaaa of file "bbbbbbbb". Conflict between the "cccccccc" attribute specified on the "dddddddd" tag and either a previously defined attribute or a reserved attribute. Panel will not be saved.
ISPC808
ISPC808E: Error. Line aaaaaaaa of file "bbbbbbbb". A scrollable area which contains a LSTFLD tag grouping cannot contain any other tags. Panel will not be saved.
ISPC809
ISPC809E: Error. Line aaaaaaaa of file "bbbbbbbb". A scrollable area has been defined without any lines. A null )AREA section is not valid for ISPF. Panel will not be saved.
ISPC810
ISPC810E: Error. The maximum number of current files (aaaaaaaa) has been exceeded.
ISPC811
ISPC811W: Warning. Line aaaaaaaa of file "bbbbbbbb". The CHOFLD tag can not be used within CHOICE text for "LISTTYPE=cccccccc". The LISTTYPE attribute is ignored. This SELFLD tag group will be formatted as a numbered single-choice list.
ISPC851
ISPC851W: Warning. Line aaaaaaaa of file "bbbbbbbb". A help panel has been defined with either a Width > 76 and/or a Depth > 22 and will require a device larger than 24x80 for display of the panel. The width must allow for 4 bytes and the depth must allow 2 lines for pop-up borders on help panels.
ISPC852
ISPC852W: Warning. Line aaaaaaaa of file "bbbbbbbb". When a panel is defined with width = "cccccccc", the panel depth must be less than "dddddddd". Panel depth is reset to "eeeeeeee".
ISPC853
ISPC853W: Warning. Line aaaaaaaa of file "bbbbbbbb". When a panel is defined with width = "cccccccc", the maximum panel depth must be 3 lines less than the terminal screen size to prevent an ISPF display error.
ISPC854
ISPC854W: Warning. Line aaaaaaaa of file "bbbbbbbb". The AUTOTYPE=cccccccc definition is not valid unless you have also used AUTOTYPE to define "dddddddd". AUTOTYPE=cccccccc will be ignored.
ISPC856
ISPC856W: Warning. Line aaaaaaaa of file "bbbbbbbb". The panel width "cccccccc" will not fit within the output file record length of "dddddddd". The WIDTH of panels being converted with the NOPREP option must be less than or equal to the record length of the output panel file.
ISPC857
ISPC857W: Warning. Line aaaaaaaa of file "bbbbbbbb". The panel width "cccccccc" will not fit within the specified output file record length of "dddddddd". The WIDTH of panels being converted with the NOPREP option must be less than or equal to the specified record length of the output panel file.
ISPC859
ISPC859W: Warning. Line aaaaaaaa of file "bbbbbbbb". The LSTFLD tag (and nested LSTCOL tags) will be formatted at the bottom of the panel for use by ISPF table display.
ISPC865
ISPC865W: Warning. Line aaaaaaaa of file "bbbbbbbb". The comment "cccccccc" does not conform to DTL rules for the use of the '-' character. This comment is accepted for the conversion. Please update the tag source file to DTL comment syntax standards.
ISPC866
ISPC866W: Warning. Line aaaaaaaa of file "bbbbbbbb". The GML source "cccccccc" does not conform to DTL rules for comment continuation. This syntax is accepted for the conversion. Please update the tag source file to DTL comment syntax standards.
ISPC868
ISPC868E: Error. Line aaaaaaaa of file "bbbbbbbb". The use of the "cccccccc" tag is limited to the first 99 scrollable areas. Panel will not be saved.
ISPC869
ISPC869E: Error. Line aaaaaaaa of file "bbbbbbbb". The maximum of 999 uses of the "cccccccc" tag for a dddddddd panel section has been exceeded. Panel will not be saved.
ISPC890A
ISPC890AW: Warning. Line aaaaaaaa of file "bbbbbbbb". The PARM1 attribute must be specified to provide the mask-character for the PICTCN verify statement.
ISPC890B
ISPC890BW: Warning. Line aaaaaaaa of file "bbbbbbbb". The PARM2 attribute must be specified to provide the field-mask for the PICTCN verify statement.
ISPC890C
ISPC890CW: Warning. Line aaaaaaaa of file "bbbbbbbb". The PARM3 attribute must be specified to provide the verification string for the PICTCN verify statement.
ISPC891
ISPC891W: Warning. Line aaaaaaaa of file "bbbbbbbb". The PARM1 attribute containing the mask-character must be only 1 character.
ISPC892A
ISPC892AW: Warning. Line aaaaaaaa of file "bbbbbbbb". The PARM1 attribute contains the reserved picture string character "cccccccc". DTL does not allow characters C, c, A, a, N, n, X, x, or 9 as the mask-character.
ISPC892B
ISPC892BW: Warning. Line aaaaaaaa of file "bbbbbbbb". The PARM1 attribute contains the DTL restricted character "cccccccc". DTL does not allow characters left parenthesis, right parenthesis, comma, single quote (') or double quote (") as the mask-character.
ISPC893
ISPC893W: Warning. Line aaaaaaaa of file "bbbbbbbb". The PARM1 supplied mask-character "cccccccc" is not found as part of the PARM2 supplied field-mask "dddddddd".
ISPC894
ISPC894W: Warning. Line aaaaaaaa of file "bbbbbbbb". The field-mask position cccccccc (character "dddddddd") cannot be a reserved picture string character.
ISPC895
ISPC895W: Warning. Line aaaaaaaa of file "bbbbbbbb". The field-mask "cccccccc" length is not equal to the verification string "s4" length.
ISPC896
ISPC896W: Warning. Line aaaaaaaa of file "bbbbbbbb". No picture string characters found in verification string "cccccccc".
ISPC897
ISPC897W: Warning. Line aaaaaaaa of file "bbbbbbbb". Position "cccccccc" (character "dddddddd") of field-mask "eeeeeeee" does not correspond to a valid picture string character in verification string "ffffffff".
ISPC898
ISPC898W: Warning. Line aaaaaaaa of file "bbbbbbbb". The constant in position cccccccc (character "dddddddd") of field-mask "eeeeeeee" does not correspond to the constant in the relative position of verification string "ffffffff".
ISPC901
ISPC901W: Warning. Line aaaaaaaa of file "bbbbbbbb". Horizontal AREA formatting has reached the panel width. Tags following this AREA will be formatted below the current AREA(s), beginning at the left edge of the panel.
ISPC908
ISPC908W: Warning. Line aaaaaaaa of file "bbbbbbbb". CHECKI tag syntax error. CHECKI tag will be discarded.
ISPC909
ISPC909W: Warning. Line aaaaaaaa of file "bbbbbbbb". CHECKI can be specified only once. First specification will be used.
ISPC910
ISPC910W: Warning. Line aaaaaaaa of file "bbbbbbbb". Variable by the same name "cccccccc" was already defined.
ISPC911
ISPC911W: Warning. Line aaaaaaaa of file "bbbbbbbb". The VARCLASS attribute cccccccc requires a dddddddd value. The conversion process will continue but defaults may be affected. Please update your tag source file to contain a valid dddddddd value.
ISPC912
ISPC912W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc is a required attribute when TYPE=dddddddd.. CHECKI tag will be ignored.
ISPC913
ISPC913W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc attribute value does not correspond with dddddddd.. CHECKI tag will be ignored.
ISPC914
ISPC914W: Warning. Line aaaaaaaa of file "bbbbbbbb". PARM1 is larger than PARM2. CHECKI tag will be ignored.
ISPC915
ISPC915W: Warning. Line aaaaaaaa of file "bbbbbbbb". Attribute ignored, not needed for TYPE=cccccccc..
ISPC916
ISPC916W: Warning. Line aaaaaaaa of file "bbbbbbbb". The cccccccc="dddddddd" attribute value is not supported in the conversion process. Attribute cccccccc will be set to the default "eeeeeeee".
ISPC918
ISPC918W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc keyword was not specified. cccccccc will be set to dddddddd..
ISPC919
ISPC919W: Warning. Line aaaaaaaa of file "bbbbbbbb". The NAME = "cccccccc" keyword has not been defined by the dddddddd tag.
ISPC920
ISPC920W: Warning. Line aaaaaaaa of file "bbbbbbbb". Double quote within CHECKI TYPE=values will be treated as character data and not as an item enclosure.
ISPC921
ISPC921W: Warning. Line aaaaaaaa of file "bbbbbbbb". More than 100 items found in PARM2 attribute value for "TYPE=VALUES" on the CHECKI tag. First 100 items will be used.
ISPC922
ISPC922W: Warning. Line aaaaaaaa of file "bbbbbbbb". The attributes PARM2 and PARM3 contain duplicate values on the CHECKI tag. The PARM3 value is ignored.
ISPC930
ISPC930W: Warning. Line aaaaaaaa of file "bbbbbbbb". A VARLIST tag has been found within the PANEL tag. The VARLIST found within the PANEL tag will be accepted for this conversion. You should update your tag source file to change the VARLIST tag to occur outside the PANEL tag. VARLIST within PANEL is not a valid coding structure.
ISPC931
ISPC931W: Warning. Line aaaaaaaa of file "bbbbbbbb". A VARDCL tag has been found both under the scope of !DOCTYPE and within the PANEL tag for variable "cccccccc". The VARDCL found within the PANEL tag will be ignored. You should update your tag source file to remove the VARDCL for "cccccccc" located within the PANEL tag as this is not a valid coding structure.
ISPC932
ISPC932W: Warning. Line aaaaaaaa of file "bbbbbbbb". A VARDCL tag has been found within the PANEL tag for variable "cccccccc". The VARDCL(s) found within the PANEL tag will be accepted for this conversion. You should update your tag source file to change all VARDCL(s) to occur outside the PANEL tag. VARDCL within PANEL is not a valid coding structure.
ISPC934
ISPC934W: Warning. Line aaaaaaaa of file "bbbbbbbb". "TYPE=NUMERIC" has been specified both on the CHECKI tag and the VARCLASS tag. The entry on the CHECKI tag will be ignored for this conversion. "TYPE=NUMERIC" should be removed from the CHECKI tag.
ISPC935
ISPC935W: Warning. Line aaaaaaaa of file "bbbbbbbb". "USAGE" has been specified on the XLATL tag. This attribute has been removed from the tag language. "USAGE" should be determined by the referencing tag (explicit or implied). "USAGE" should be removed from the XLATL tag.
ISPC936
ISPC936W: Warning. Line aaaaaaaa of file "bbbbbbbb". "VARDCL" was not found for variable cccccccc specified on the dddddddd tag. Each variable should be specified by a "VARDCL" tag.
ISPC937
ISPC937W: Warning. Line aaaaaaaa of file "bbbbbbbb". A VARLIST tag has been found both outside and within the PANEL tag. The conversion utility does not support a mixed occurrence of VARLIST. The VARLIST found within the PANEL tag will be ignored for this conversion. You should update your tag source file to remove the VARLIST tags found within the PANEL tag.
ISPC938
ISPC938W: Warning. Line aaaaaaaa of file "bbbbbbbb". A VARDCL tag has been found within the PANEL tag for variable "cccccccc". The VARDCL found within the PANEL tag will be ignored because a VARLIST was found outside the PANEL tag. You should update your tag source file to remove the complete VARLIST/VARDCL tag group located within the PANEL tag.
ISPC939
ISPC939W: Warning. Line aaaaaaaa of file "bbbbbbbb". The VARCLASS attribute specified on a VARDCL tag found within the PANEL tag will be ignored. VARDCL within the panel tag is supported for prior release level attributes only. The VARCLASS attribute is valid only on VARDCL tags found outside the PANEL tag. You should update your tag source file to remove the complete VARLIST/VARDCL tag group located within the PANEL tag.
ISPC940
ISPC940E: Error. Line aaaaaaaa of file "bbbbbbbb". The VARCLASS tag to define "cccccccc" must precede the VARDCL tag which references "cccccccc".
ISPC941
ISPC941E: Error. Line aaaaaaaa of file "bbbbbbbb". All VARCLASS tags must precede any VARLIST tag in the source file.
ISPC943
ISPC943W: Warning. Line aaaaaaaa of file "bbbbbbbb". Length="cccccccc" must be an even number for "TYPE=DBCS". "cccccccc" has been changed to "dddddddd".
ISPC944
ISPC944W: Warning. Line aaaaaaaa of file "bbbbbbbb". cccccccc="dddddddd" must be an even number for field "eeeeeeee" which is specified as DBCS. "dddddddd" has been changed to "ffffffff".
ISPC970
ISPC970W: Warning. ISPDTLC received a nonzero return code from EXECIO while processing 'aaaaaaaa'. Refer to the 'bbbbbbbb' documentation for an explanation of EXECIO return code 'cccccccc'.
ISPC971
ISPC971E: Error. Check file allocation for 'aaaaaaaa.'.
ISPC972
ISPC972W: Warning. File space allocated = file space used.
ISPC973
ISPC973W: Warning. Directory blocks allocated = directory blocks used.
ISPC974
ISPC974W: Warning. Data has been truncated during DISKW operation.
ISPC975
ISPC975W: Warning. End of file reached before the specified number of records have been read.
ISPC976
ISPC976E: Error. EXECIO completed unsuccessfully.
ISPC978
ISPC978W: Warning. ISPDTLC received a nonzero return code from ISPF service 'aaaaaaaa' while processing 'bbbbbbbb'. The ISPF error message is 'cccccccc'. Please refer to the ISPF documentation for an explanation of aaaaaaaa return code 'dddddddd'.
ISPC979
ISPC979W: Warning. Refer to the aaaaaaaa. documentation for a more complete description of EXECIO return codes.
ISPC980A
ISPC980AE: Error. Do not specify a member name for the aaaaaaaa file sequential data set "bbbbbbbb".
ISPC980B
ISPC980BE: Error. Do not specify a member name for the aaaaaaaa file partitioned data set "bbbbbbbb".
ISPC981
ISPC981E: Error. The aaaaaaaa file "bbbbbbbb" is a partitioned data set and must be specified with a member name. You may use an asterisk (*) as the member name to specify that the aaaaaaaa member name is the same as the input GML member name.
ISPC981A
ISPC981AI: Notify. The aaaaaaaa file "bbbbbbbb" is a partitioned data set specified without a member name. An asterisk (*) is assumed as the member name to specify that the aaaaaaaa member name is the same as the input GML member name.
ISPC982
ISPC982E: Error. The aaaaaaaa file "bbbbbbbb" is not available. The TSO function SYSDSN has returned the message: "cccccccc".
ISPC983
ISPC983E: Error. "aaaaaaaa" profile not found.
ISPC984
ISPC984E: Error. Bad aaaaaaaa structure for "bbbbbbbb".
ISPC985
ISPC985E: Error. Bad profile structure. DDNAME "aaaaaaaa" in profile "bbbbbbbb" is not valid.
ISPC986
ISPC986E: Error. The aaaaaaaa file "bbbbbbbb" record format "cccccccc" is not valid. This file must have a "dddddddd" format.
ISPC987
ISPC987E: Error. The allocation for file "aaaaaaaa" has failed. The TSO ALLOC function has returned the message: "bbbbbbbb".
ISPC988
ISPC988E: Error. The "SCRIPT" option has been specified, but no SCRIPT output file name has been provided.
ISPC989
ISPC989E: Error. Incorrect syntax: Option "aaaaaaaa" conflicts with option "bbbbbbbb". You cannot specify both options for the same invocation of the conversion utility.
ISPC989A
ISPC989AE: Error. Incorrect syntax: Option "aaaaaaaa" conflicts with option "bbbbbbbb". You cannot specify both options on the same COMPOPT tag.
ISPC990
ISPC990E: Error. Incorrect syntax: Option must be "aaaaaaaa" or "bbbbbbbb" but not both.
ISPC991
ISPC991E: Error. Incorrect syntax: aaaaaaaa="bbbbbbbb". The value for aaaaaaaa must be from 1 to cccccccc characters in length.
ISPC992
ISPC992E: Error. Incorrect syntax: aaaaaaaa="bbbbbbbb" contains character(s) which are not valid. The first character of "bbbbbbbb" must be "A-Z" or "#, $, @". Remaining characters must be "A-Z", "#, $, @" or "0-9".
ISPC993
ISPC993E: Error. Incorrect syntax: aaaaaaaa="bbbbbbbb" contains character(s) which are not valid. All characters must be "A-Z", "#, $, @" or "0-9".
ISPC994
ISPC994E: Error. Option is not valid: "aaaaaaaa".
ISPC995
ISPC995E: Error. Undefined error.
ISPC996
ISPC996E: Error. Duplicate option: "aaaaaaaa".
ISPC997
ISPC997E: Error. Option is not valid: "aaaaaaaa=bbbbbbbb".
ISPC998
ISPC998E: Error. The ISPDTLC invocation syntax is: "ISPDTLC source-filespec ( invocation options". The "(" is required to identify the invocation options.
ISPC999
ISPC999E: Conversion terminated due to severe error.
ISPD001
Allocation failed - DAIR RC = aaaaaaaa dec, DARC = bbbbbbbb hex.
ISPD002
Data set not found - 'aaaaaaaa' not on volume 'bbbbbbbb'.
ISPD003
Catalog or VTOC error - I/O, insufficient storage, or unrecoverable error with volume aaaaaaaa.
ISPD004
Volume 'aaaaaaaa' not avail - Volume not mounted or not authorized for your use.
ISPD005
Data set in use - Data set 'aaaaaaaa' in use by another user, try later.
ISPD006
VTOC full on vol 'aaaaaaaa' - No room in volume table of contents for more data sets.
ISPD007
No space on vol 'aaaaaaaa' - Insufficient space for data set 'bbbbbbbb'.
ISPD008
Invalid index structure - Dsname 'aaaaaaaa' index conflict.
ISPD009
DDNAME not found - DDNAME 'aaaaaaaa' not allocated.
ISPD010
File name in use - File name (DDNAME) 'aaaaaaaa' is allocated to another data set.
ISPD011
Syntax error in DDNAME - File name (DDNAME) 'aaaaaaaa' contains invalid special character.
ISPD012
Syntax error member name - Member name 'aaaaaaaa' contains invalid special character.
ISPD013
Invalid data set name - Syntax error in data set name 'aaaaaaaa'.
ISPD014
Data set not cataloged - 'aaaaaaaa' was not found in catalog.
ISPD015
Dd dynams exhausted - Data set 'aaaaaaaa' cannot be allocated.
ISPD016
Duplicate data set name - Data set 'aaaaaaaa' already exists.
ISPD017
Data set not partitioned - Member 'aaaaaaaa' was specified for data set 'bbbbbbbb'.
ISPD018
Multivolume data set - Data set 'aaaaaaaa' occupies more than one volume.
ISPD019
Catalog error - Already cataloged, VSAM protected, or other - 'aaaaaaaa'.
ISPD020
Data set already open - Data set 'aaaaaaaa' is already in use on your behalf.
ISPD021
Allocation denied - Data set 'aaaaaaaa' - request denied by installation exit.
ISPD022
Allocation failed - DAIR RC = 'aaaaaaaa' dec, CTRC = 'bbbbbbbb' hex.
ISPD023
Tape not supported - ISPF does not support data sets on tape.
ISPD101
Invalid panel name - 'aaaaaaaa' - 8 char limit
ISPD102
Invalid PGM name - 'aaaaaaaa' - 8 char limit
ISPD103
Invalid keyword given - 'aaaaaaaa' invalid
ISPD104
Invalid parameter given - 'aaaaaaaa' invalid
ISPD105
Insufficient storage - Unable to process command.
ISPD106
Conflicting parameters - CMD conflicts with another parameter.
ISPD107
Conflicting parameters - PGM conflicts with another parameter
ISPD108
Conflicting parameters - PANEL conflicts with another parameter.
ISPD109
Invalid command - Parentheses are not paired correctly.
ISPD110
CMD abended - 'aaaaaaaa' terminated abnormally.
ISPD111
CMD did not complete - 'aaaaaaaa' was terminated with an ATTENTION.
ISPD112
Invalid PGM name - Link to 'aaaaaaaa' failed.
ISPD113
Invalid panel - 'aaaaaaaa' is not a valid 'selection' panel.
ISPD114
Invalid NEWAPPL ID - aaaaaaaa is not a valid NEWAPPL ID. Length exceeds 4 characters.
ISPD115
Option conflict - An OPT keyword conflicts with a previously specified option.
ISPD116
Option too long - Maximum option length supported is 24 characters.
ISPD117
The initially invoked CLIST ended with a return code = aaaaaaaa.
ISPD118
The initially invoked module ended with a return code = aaaaaaaa.
ISPD119
Required parm missing - A select parameter requires one of PGM, CMD, or PANEL.
ISPD120
Invalid CLIST name - 'aaaaaaaa' - name greater than 8 characters.
ISPD121
Specified option invalid - 'aaaaaaaa' - contains invalid opt selection.
ISPD122
Command not allowed - 'aaaaaaaa' command not allowed within ISPEXEC select service request.
ISPD123
Invalid command - Command 'aaaaaaaa' not found or contains invalid syntax.
ISPD124
Invalid command - Command name 'aaaaaaaa' contains invalid syntax.
ISPD126
Invalid command - Commands such as LOGON, LOGOFF, SPF, ISPF, etc. are not permitted.
ISPD128
Invalid command - The entry for this command in the ISPF TSO Command Table (ISPTCM) indicates it cannot be run when ISPF has been invoked from a web client.
ISPD130
Recursion error - Recursive use of an ISPF function ( aaaaaaaa ) is not allowed.
ISPD131
PDF subs load error - Unable to load the subroutines for the PDF component of ISPF.
ISPD132
Insufficient storage - Insufficient storage to load the subroutines for the PDF component of ISPF.
ISPD133
Invalid application ID - Appl ID 'aaaaaaaa' is reserved for system use by the dialog manager.
ISPD134
Invalid application ID - Appl ID 'aaaaaaaa' starts with or contains an invalid character.
ISPD135
Select string truncated - Substituted select string exceeded allowable length of 32767.
ISPD136
Language parm invalid - 'aaaaaaaa' specified in LANG parameter is not valid.
ISPD137
Language parameter error - Syntax error in language parameter value 'aaaaaaaa'.
ISPD139
Language size error - Language size contains nonnumeric characters or too many digits.
ISPD140
Enter option - Enter one of the listed options.
ISPD141
Invalid option - The option that was entered was not valid.
ISPD142
Nesting limit exceeded - The nesting limit for dialog EXECs in user area has been exceeded.
ISPD143
EXEC not found - The EXEC named 'aaaaaaaa' was not found in the search order.
ISPD144
Panel definition error - 100 panels processed. No return key stop found. ZPARENT causing loop.
ISPD145
Invalid logo panel name - 'aaaaaaaa' - name greater than 8 characters.
ISPD146
Keyword conflict - BARRIER and NEST are only allowed with the CMD keyword.
ISPD147
Wrong environment - BARRIER and NEST keywords are only valid in the TSO environment.
ISPD148
BLDL error - Error processing LIBDEF search for program aaaaaaaa. BLDL return code = bbbbbbbb.
ISPD150
Invocation error - System error encountered invoking authorized command 'aaaaaaaa'.
ISPD151
Language qualifier error - The only value valid for the APL language is START.
ISPD152
Invalid PGM name - Load of PGM 'aaaaaaaa' failed.
ISPD153
PASSLIB spec invalid - NEWAPPL must be specified to specify PASSLIB.
ISPD154
Storage release error - Error occurred when releasing application library blocks.
ISPD155
Deallocation failure - Deallocation failure - check allocated data sets.
ISPD156
Authorization failure - Request rejected by exit routine for select service start.
ISPD157
Severe error - Select service start exit routine returned invalid code aaaaaaaa.
ISPD158
Invocation error - System error encountered invoking command 'aaaaaaaa'.
ISPD170
Conflicting parameters - DCSS conflicts with another parameter.
ISPD171
Storage error - A storage error occurred in the SELECT DCSS service.
ISPD172
DCSS name too long - The segment name 'aaaaaaaa' is greater than 8 characters.
ISPD173
Wrong environment - The SELECT DCSS service is only valid in a CMS environment.
ISPD174
Conflicting parameters - DCSS or PGM was specified more than once.
ISPD175
IKJADTAB interface error - RC = 'aaaaaaaa' from TSO routine IKJADTAB, function = 'bbbbbbbb'.
ISPD176
Interface error - RC = 'aaaaaaaa' from TSO routine IRXSTK, function = DROPTERM.
ISPD177
Interface error - RC = 'aaaaaaaa' from TSO routine IRXSTK, function = MARKTERM.
ISPD178
Invalid screen name - A screen name must be more than one character, and all alphanumerics, and cannot be LIST, PREV, or NEXT.
ISPD180
Invalid control parm - An attention interrupt has already been established for this session.
ISPD181
Invalid control parm - There is no current attention to CANCEL.
ISPD182
Invalid environment - This service does not exist in this environment.
ISPD183
Invalid interface - This service can only be invoked from the module interface.
ISPD187
Key display forced off - Current application does not allow ISPF to display function keys.
ISPD188
Key display forced on - Current application does not allow the function key display to be removed.
ISPD189
Mismatched quotes - The string contains an uneven number of quotes.
ISPD190
Invalid CONTROL parm - 'aaaaaaaa' is invalid as request type parameter to the CONTROL service.
ISPD191
Invalid CONTROL parm - 'aaaaaaaa' is invalid option for 'CONTROL errors' service request.
ISPD192
Invalid CONTROL parm - 'aaaaaaaa' is invalid option for 'CONTROL display' service request.
ISPD193
Invalid CONTROL parm - The start line-number is invalid for CONTROL DISPLAY service request.
ISPD194
Missing CONTROL parm - A required parameter is missing from the CONTROL service request.
ISPD195
Missing CONTROL parm - A required parameter missing from CONTROL DISPLAY service request.
ISPD196
Invalid CONTROL parm - 'aaaaaaaa' is invalid option for CONTROL ABEND service request.
ISPD197
Invalid CONTROL parm - 'aaaaaaaa' is invalid option for CONTROL CRETURN service request.
ISPD198
Invalid CONTROL parm - 'aaaaaaaa' is invalid option for CONTROL NONDISPL service request.
ISPD201
Panel name is invalid - 'aaaaaaaa' - name greater than 8 characters.
ISPD202
PGM name is invalid - 'aaaaaaaa' - name greater than 8 characters.
ISPD203
Invalid keyword - 'aaaaaaaa' contains unrecognized keyword.
ISPD204
Invalid parameter - 'aaaaaaaa' contains unrecognized parameter.
ISPD205
Insufficient storage - Unable to continue processing.
ISPD206
Conflicting parameters - CMD conflicts with another keyword.
ISPD207
Conflicting parameters - PGM conflicts with another keyword.
ISPD208
Conflicting parameters - PANEL conflicts with another keyword.
ISPD209
Incorrect parameters - Parentheses are not paired correctly.
ISPD210
CMD abended - 'aaaaaaaa' terminated abnormally.
ISPD211
CMD did not complete - 'aaaaaaaa' was terminated with an ATTENTION.
ISPD212
Invalid PGM name - Link to 'aaaaaaaa' failed, abend code = x'bbbbbbbb'.
ISPD213
Invalid panel - 'aaaaaaaa' is not a valid 'selection' panel.
ISPD214
Invalid NEWAPPL ID - 'aaaaaaaa' is not a valid 'NEWAPPL ID'. Length exceeds 4 characters.
ISPD215
Option conflict - An OPT keyword conflicts with a previously specified option.
ISPD216
Option too long - Maximum option length supported is 24 characters.
ISPD217
Initial CLIST RC > 4 - The initially invoked CLIST ended with a return code = aaaaaaaa.
ISPD218
Initial program RC > 4 - The initially invoked module ended with a return code = aaaaaaaa.
ISPD219
Required parm missing - A select parameter requires one of PGM, CMD, or PANEL.
ISPD220
CLIST name is invalid - 'aaaaaaaa' - name greater than 8 characters.
ISPD221
Specified option invalid - 'aaaaaaaa' - contains invalid OPT selection.
ISPD222
Command not allowed - 'aaaaaaaa' not allowed from command line or nested in SELECT CMD request.
ISPD223
Invalid command - Command 'aaaaaaaa' not found or contains invalid syntax.
ISPD224
Invalid command - Command name 'aaaaaaaa' contains invalid syntax.
ISPD226
Invalid command - Commands such as LOGON, LOGOFF, SPF, ISPF, etc. are not permitted.
ISPD228
Invalid command - The entry for this command in the ISPF TSO Command Table (ISPTCM) indicates it cannot be run when ISPF has been invoked from a web client.
ISPD230
Recursion error - Recursive use of an ISPF function is not allowed.
ISPD231
PDF subs load error - Unable to load the subroutines for the PDF component of ISPF.
ISPD232
Insufficient storage - Insufficient storage to load the subroutines for the PDF component of ISPF.
ISPD233
Invalid application ID - Application ID 'aaaaaaaa' is reserved for system use by the dialog manager.
ISPD234
Invalid application ID - Application ID 'aaaaaaaa' starts with or contains an invalid character.
ISPD235
Select string truncated - Substituted select string exceeded allowable length of 32767.
ISPD236
LANG parm invalid - 'aaaaaaaa' specified in LANG parameter is not valid.
ISPD237
Language parameter error - Syntax error in language parameter value 'aaaaaaaa'.
ISPD239
Language size error - Language size contains nonnumeric characters or too many digits.
ISPD240
Enter option - Enter one of the listed options.
ISPD241
Invalid option - The option that was entered was not valid.
ISPD242
Nesting limit exceeded - The nesting limit for dialog EXECs in user area has been exceeded.
ISPD243
EXEC not found - The EXEC named 'aaaaaaaa' was not found in the search order.
ISPD244
Panel definition error - 100 panels processed. No return key stop found. ZPARENT causing loop.
ISPD245
Invalid logo panel name - 'aaaaaaaa' - name greater than 8 characters.
ISPD246
Keyword conflict - BARRIER and NEST are only allowed with the CMD keyword.
ISPD247
Wrong environment - BARRIER and NEST keywords are only valid in the TSO environment.
ISPD248
BLDL error - Error processing LIBDEF search for program aaaaaaaa. BLDL return code = bbbbbbbb..
ISPD250
Invocation error - System error encountered invoking authorized command 'aaaaaaaa'.
ISPD251
Language qualifier error - The only value valid for the APL language is START.
ISPD252
Invalid PGM name - Load of PGM 'aaaaaaaa' failed.
ISPD253
PASSLIB spec invalid - NEWAPPL must be specified to specify PASSLIB.
ISPD254
Storage release error - Error occurred when releasing application library blocks.
ISPD255
Deallocation failure - Deallocation failure - check allocated data sets.
ISPD256
Authorization failure - Request rejected by exit routine for select service start.
ISPD257
Severe error - Select service start exit routine returned invalid code aaaaaaaa
ISPD258
Invocation error - System error encountered invoking command 'aaaaaaaa'.
ISPD270
Conflicting parameters - DCSS conflicts with another parameter.
ISPD271
Storage error - A storage error occurred in the SELECT DCSS service.
ISPD272
DCSS name too long. - The segment name 'aaaaaaaa' is greater than 8 characters.
ISPD273
Wrong environment - The SELECT DCSS service is only valid in a CMS environment.
ISPD274
Conflicting parameters - DCSS or PGM was specified more than once.
ISPD275
IKJADTAB interface error - RC = 'aaaaaaaa' from TSO routine IKJADTAB, function = 'bbbbbbbb'.
ISPD276
Interface error - RC = 'aaaaaaaa' from TSO routine IRXSTK, function = 'dropterm'
ISPD277
Interface error - RC = 'aaaaaaaa' from TSO routine IRXSTK, function = 'markterm'
ISPD278
Invalid screen name - A screen name must be more than one character, satisfy the rules for a member name, and cannot be LIST, PREV or NEXT.
ISPD280
Invalid CONTROL parm - An attention interrupt has already been established for this session.
ISPD281
Invalid CONTROL parm - There is no current attention to CANCEL.
ISPD282
Invalid environment - This service does not exist in this environment.
ISPD283
Invalid interface - This service can only be invoked from the module interface.
ISPD284
Invalid CONTROL parm - 'aaaaaaaa' is invalid option for CONTROL ATTN service request.
ISPD285
Missing CONTROL parm - A required parameter missing from CONTROL ATTN service request.
ISPD286
Invalid PFSHOW parm - Valid PFSHOW parameters are ON, OFF, TAILOR, or blank.
ISPD287
Key display forced off - Current application does not allow ISPF to display function keys.
ISPD288
Key display forced on - Current application does not allow function key display to be removed.
ISPD289
Mismatched quotes - The string contains an uneven number of quotes
ISPD290
Invalid CONTROL parm - 'aaaaaaaa' is invalid as request type parameter to the CONTROL service.
ISPD291
Invalid CONTROL parm - 'aaaaaaaa' is invalid option for CONTROL ERRORS service request.
ISPD292
Invalid CONTROL parm - 'aaaaaaaa' is invalid option for CONTROL DISPLAY service request.
ISPD293
Invalid CONTROL parm - The start line-number is invalid for CONTROL DISPLAY service request.
ISPD294
Missing CONTROL parm - A required parameter is missing from the CONTROL service request.
ISPD295
Missing CONTROL parm - A required parameter missing from CONTROL DISPLAY service request.
ISPD296
Invalid CONTROL parm - 'aaaaaaaa' is invalid option for CONTROL ABEND service request.
ISPD297
Invalid CONTROL parm - 'aaaaaaaa' is invalid option for CONTROL CRETURN service request.
ISPD298
Invalid CONTROL parm - 'aaaaaaaa' is invalid option for CONTROL NONDISPL service request.
ISPD299
SPLIT not supported - The ISPF batch environment does not support SPLIT.
ISPD301
Invalid FKA parm - Valid FKA parameters are ON, OFF, PREFIX, NOPREFIX, or blank. PREFIX and NOPREFIX are only valid when running in GUI mode.
ISPD302
Invalid upload target - The target of the upload must be a specific member of a PDS or a sequential data set.
ISPD303
Member name not allowed - You cannot specify a member name for a sequential data set.
ISPD304
Missing CONTROL parm - A required parameter is missing from the CONTROL PASSTHRU service request.
ISPD305
Invalid CONTROL parm - 'aaaaaaaa' is not a valid parameter for the CONTROL PASSTHRU service request.
ISPD801
TBOPEN failure - Return code aaaaaaaa from TBOPEN for table "bbbbbbbb". (1+)
ISPD802
Table not found - Table "aaaaaaaa" not found in ISPTLIB, or ISPTLIB not allocated. (1+)
ISPD803
ISPPLIB error - The panel input library ISPPLIB is not open. (aaaaaaaa+)
ISPD804
Panel not found - Panel "aaaaaaaa" not found in panel input library "ISPPLIB". (bbbbbbbb)
ISPD805
BLDL error - I/O error during BLDL for ddname "aaaaaaaa". (bbbbbbbb)
ISPD806
aaaaaaaa error - The panel output library "aaaaaaaa" has not been allocated. (1+)
ISPD807
No asterisk found - The "ZSEL =" in panel "aaaaaaaa" has no asterisk translation. (bbbbbbbb)
ISPD808
Model section found - Panel "aaaaaaaa" is an invalid selection panel (model section found).(bbbbbbbb)
ISPD809
GETMAIN error - Return code aaaaaaaa from common subroutine CSM. (1+)
ISPD810
Read error - I/O error reading panel "aaaaaaaa" from "bbbbbbbb". (cccccccc)
ISPD811
Panel too large - Definition for panel "aaaaaaaa" will exceed bbbbbbbb lines. (cccccccc)
ISPD812
Body size error - Body of panel "aaaaaaaa" is empty or larger than bbbbbbbb lines. (cccccccc)
ISPD813
Missing )END stmt - End of file found before )END statement for panel "aaaaaaaa". (bbbbbbbb)
ISPD814
No PROC section - "aaaaaaaa" is an invalid selection panel (no PROC section found). (bbbbbbbb)
ISPD815
No ZSEL assignment - No ZSEL assignment found in PROC section of panel "aaaaaaaa". (bbbbbbbb)
ISPD816
Invalid option - Existing option "aaaaaaaa" in panel "bbbbbbbb" is too long. (cccccccc)
ISPD817
Long select string - Select string specified for panel "aaaaaaaa" is too long. (bbbbbbbb)
ISPD818
Duplicate option - Option "aaaaaaaa" already exists in panel "bbbbbbbb". (cccccccc)
ISPD819
Invalid option - Option "aaaaaaaa" for "bbbbbbbb" has blanks, commas, or periods. (cccccccc)
ISPD820
Invalid keyword - "aaaaaaaa" for "bbbbbbbb" has blanks, commas, or periods. (cccccccc)
ISPD821
Write error - I/O error writing panel "aaaaaaaa" to "bbbbbbbb". (cccccccc+)
ISPD822
STOW error - Rc aaaaaaaa, reason code bbbbbbbb for member "cccccccc". (dddddddd+)
ISPD823
FREEMAIN error - Return code aaaaaaaa from common sub CSM. (all rows processed.)
ISPD824
Cdsn failure - Return code aaaaaaaa from common sub CDSN for "bbbbbbbb". (1+)
ISPD825
Open error - Return code aaaaaaaa from common sub CDO for "bbbbbbbb". (1+)
ISPD826
Invalid data - Invalid data in row aaaaaaaa of table "bbbbbbbb". row ignored. (aaaaaaaa)
ISPD827
Invalid text count - aaaaaaaa text lines specified; must be between 0 and bbbbbbbb..(cccccccc)
ISPD828
Missing keyword - Keyflag set but no keyword given in row aaaaaaaa of table "bbbbbbbb".(aaaaaaaa)
ISPD829
Blank panel name - Panel name in row aaaaaaaa of table "bbbbbbbb" is blank. (aaaaaaaa)
ISPD830
aaaaaaaa error - The sequential input library "aaaaaaaa" has not been allocated. (1+)
ISPD831
aaaaaaaa error - The sequential output library "aaaaaaaa" has not been allocated. (1+)
ISPD832
Seq write error - I/O error writing panel "aaaaaaaa" data to"bbbbbbbb". (cccccccc+)
ISPD833
Keyword required - Keyword string required for file input was not found. (aaaaaaaa)
ISPD834
No panel name keyword - Input file does not start with PANEL keyword.
ISPD835
Table failure - Create of temporary table failed.
ISPD836
DMSCSL invocation error - Routine DMSCSL return code = 'aaaaaaaa'. Contact your system programmer.
ISPE000
Invalid return code (aaaaaaaa) received from ISPF reserve exit.
ISPE001
ISPF reserve exit, RC=16, resource not available.
ISPE002
Severe error - Display service exit routine returned invalid return code aaaaaaaa.
ISPE003
Authorization failure - Command 'aaaaaaaa' rejected by exit routine for TSO command start.
ISPE004
TSO command error - Exit routine for command 'aaaaaaaa' returned invalid code bbbbbbbb.
ISPE005
Resource not available - Reserve exit, RC=16, resource not available.
ISPE006
Invalid return code - Invalid return code received from reserve exit - valid RC=0,16.
ISPE007
Severe error - Panel input exit routine aaaaaaaa returned invalid return code bbbbbbbb for panel cccccccc.
ISPE101
ENVIRON parm error - aaaaaaaa is an invalid parameter for ENVIRON command
ISPE102
ENVIRON aaaaaaaa error - bbbbbbbb is an invalid parameter for ENVIRON aaaaaaaa command.
ISPE103
Ddname not specified - A ddname must be specified for ENVIRON TERMTRAC aaaaaaaa.
ISPE104
TERMTRAC not activated - Storage could not be obtained for the TERMTRAC buffer.
ISPE105
TERMTRAC activated - TERMTRAC has been activated.
ISPE106
TERMTRAC not active - ENVIRON TERMTRAC dump requested when TERMTRAC is not active.
ISPE107
TERMTRAC turned off - TERMTRAC has been turned off.
ISPE108
ENVIRON ENBLDUMP on - ENVIRON ENBLDUMP has been turned on.
ISPE109
ENVIRON ENBLDUMP off - ENVIRON ENBLDUMP has been turned off.
ISPE110
Invalid ENBLDUMP value - An ENBLDUMP value of ON or OFF must be specified.
ISPE111
Invalid TERMTRAC value - A TERMTRAC value of ON, OFF, or ERROR must be specified.
ISPE112
Invalid ddname - Ddname must be alphanumeric with first character alphabetic.
ISPE113
Invalid TERMSTAT value - YES or QUERY must be specified to invoke ENVIRON TERMSTAT.
ISPE114
aaaaaaaa = bbbbbbbb
ISPE115
aaaaaaaa = bbbbbbbb - x'cccccccc'
ISPE116
aaaaaaaa = x'bbbbbbbb'
ISPE117
aaaaaaaa
ISPE118
ENVIRON parm error - The parameter is longer than 8 characters.
ISPE200
Command not allowed - Recursive entry to ISPF is not permitted.
ISPE203
Parameter missing - A parameter is required with the TSO command.
ISPE208
Command not allowed - This command is not intended to be executed from option 6.
ISPE300
SHRPROF unavailable - The SHRPROF command is unavailable when the Shared Profile support is inactive.
ISPE301
SHRPROF parm error - A parameter is longer than 8 characters.
ISPE302
SHRPROF parm error - Too many parameters specified on the SHRPROF command
ISPE303
SHRPROF aaaaaaaa error - Too many parameters specified on the SHRPROF aaaaaaaa command.
ISPE304
SHRPROF WAIT error - aaaaaaaa must be numeric and in the range 0 to 9999.
ISPE305
SHRPROF RETRY error - aaaaaaaa must be numeric and in the range 0 to 99.
ISPE310
SHRPROF aaaaaaaa error - Required second parameter missing for SHRPROF aaaaaaaa command.
ISPE311
SHRPROF aaaaaaaa error - bbbbbbbb is an invalid parameter for SHRPROF aaaaaaaa command.
ISPE312
SHRPROF aaaaaaaa error - bbbbbbbb is an invalid parameter for SHRPROF aaaaaaaa cccccccc command.
ISPE313
SHRPROF aaaaaaaa error - bbbbbbbb is an invalid parameter for SHRPROF aaaaaaaa cccccccc command.
ISPE314
SHRPROF parm error - aaaaaaaa is an invalid parameter for SHRPROF command
ISPE320
SHRPROF Settings reset - Shared Profile settings have been reset to ISPF configuration defaults.
ISPE321
SHRPROF Canceled - Shared Profile settings have been canceled
ISPE322
SHRPROF Settings Updated - Shared Profile settings have been updated
ISPE323
SHRPROF aaaaaaaa set to bbbbbbbb
ISPE324
SHRPROF aaaaaaaa reset to bbbbbbbb
ISPE325
SHRPROF aaaaaaaa bbbbbbbb set to cccccccc
ISPE326
SHRPROF aaaaaaaa bbbbbbbb reset to cccccccc
ISPE327
SHRPROF aaaaaaaa set - SHRPROF aaaaaaaa has been set.
ISPF101
Router service error - Unknown file tailoring service.
ISPF102
No work file - Work file not open.
ISPF103
No imbed file - Imbed file 'aaaaaaaa' does not exist, bbbbbbbb record-cccccccc.
ISPF104
)SEL error - )ENDSEL has no matching )SEL, aaaaaaaa record-bbbbbbbb.
ISPF105
Output overflow - Line to be written greater than data set LRECL (aaaaaaaa), bbbbbbbb record-cccccccc.
ISPF106
Control word error - Invalid control word, aaaaaaaa record-bbbbbbbb.
ISPF107
Control word error - Invalid control word parameter, aaaaaaaa record-bbbbbbbb.
ISPF108
Variable name error - Invalid variable name, aaaaaaaa record-bbbbbbbb.
ISPF109
)IM error - Exceeds maximum )IM level of 15, aaaaaaaa record-bbbbbbbb.
ISPF110
aaaaaaaa. error - Exceeds maximum )IF and )SEL levels of 32, bbbbbbbb record-cccccccc.
ISPF111
Record missing - Continuation card missing, aaaaaaaa record-bbbbbbbb.
ISPF112
Substitution error - Invalid cond. sub. string, aaaaaaaa record-bbbbbbbb.
ISPF113
ENQUEUE error - Error occurred on ENQUEUE for file 'aaaaaaaa' RC-bbbbbbbb.
ISPF114
)IM error - )IM ends in wrong )SEL, aaaaaaaa record-bbbbbbbb.
ISPF115
)IM error - )IM ends in wrong )DOT, aaaaaaaa record-bbbbbbbb.
ISPF116
)SEL error - )SEL has no matching )ENDSEL, aaaaaaaa record-bbbbbbbb.
ISPF117
)SEL error - )SEL ends in wrong )DOT, aaaaaaaa record-bbbbbbbb.
ISPF118
Too many tables - Table stack is full, aaaaaaaa record-bbbbbbbb.
ISPF119
)DOT error - )ENDDOT has no matching )DOT, aaaaaaaa record-bbbbbbbb.
ISPF120
)DOT error - )DOT has no matching )ENDDOT, aaaaaaaa record-bbbbbbbb.
ISPF121
)DOT error - )DOT ends in wrong aaaaaaaa., bbbbbbbb record-cccccccc
ISPF122
Service error - RC aaaaaaaa from bbbbbbbb, cccccccc record-dddddddd
ISPF123
Invalid operator - Invalid relational operator, aaaaaaaa record-bbbbbbbb
ISPF124
Invalid operator - Invalid Boolean operator, aaaaaaaa record-bbbbbbbb
ISPF125
Invalid operation - Invalid operation code in aaaaaaaa, bbbbbbbb record-cccccccc
ISPF126
)DOT error - Table being processed via )DOT, aaaaaaaa record-bbbbbbbb.
ISPF127
)DEFAULT error - Invalid character in )DEFAULT, aaaaaaaa record-bbbbbbbb.
ISPF128
)DEFAULT error - Character missing in )DEFAULT, aaaaaaaa record-bbbbbbbb.
ISPF129
DEQUEUE error - Error occurred on DEQUEUE for file 'aaaaaaaa' RC-bbbbbbbb.
ISPF130
GETMAIN error - Module aaaaaaaa received RC-bbbbbbbb from ISPCSM.
ISPF131
Build TFD error - Module aaaaaaaa received RC-bbbbbbbb from ISPCBTFD.
ISPF132
Data set name error - Module aaaaaaaa received RC-bbbbbbbb from ISPCDSN.
ISPF133
DEQUEUE error - Module aaaaaaaa received RC-bbbbbbbb from ISPCDQ.
ISPF134
FIND error - Module aaaaaaaa received RC-bbbbbbbb from ISPCFI.
ISPF135
I/O error - Unrecoverable I/O error on aaaaaaaa.
ISPF136
I/O error - Unrecoverable I/O error on output data set.
ISPF137
Ftopen error - Required files not open
ISPF138
STOW error - Module aaaaaaaa received decimal return code bbbbbbbb, decimal reason code cccccccc from the STOW macro.
ISPF139
Output error - Output file is not a PDS.
ISPF140
Data set not allocated - aaaaaaaa data set is not allocated.
ISPF141
ENQUEUE failed - Data set aaaaaaaa in use, ENQUEUE failed.
ISPF142
Variable truncation - Variable truncation has occurred.
ISPF143
STAE error - Module aaaaaaaa received RC-bbbbbbbb from STAE.
ISPF144
System abend - Module aaaaaaaa intercepted system abend bbbbbbbb.
ISPF145
Output data conflict - Generated data in last output column, last input column cannot be moved.
ISPF147
FSSTATE error - RC-aaaaaaaa received from FSSTATE.
ISPF151
Invalid tab position - Tab (aaaaaaaa) out of range (1-255), bbbbbbbb record-cccccccc.
ISPF152
Invalid tab position - Tab (aaaaaaaa) must exceed previous tab, bbbbbbbb rec-cccccccc.
ISPF153
Too many tab stops - Tab control word has more than 16 tab stops, aaaaaaaa rec-bbbbbbbb.
ISPF154
Invalid LRECL - The limit of input/output data set logical record length is 255.
ISPF155
STOW password error - File tailoring does not support password protected members.
ISPF156
Output overflow - Line to be written greater than data set LRECL aaaaaaaa.
ISPF160
FTP errors have occurred - Review the FTP output for the error that has occurred. See the TCP/IP User Guide for FTP return code explanations. Enter the HELP command for a list of FTP installation requirements. After determining the cause of the error, return to the install dialog and rerun the ISPF C/S INSTALL command.
ISPF161
FTP command not found. - The ISPF C/S INSTALL program received a severe error running the FTP command, probably due to not being able to find the FTP command.
ISPF162
EXE not found - The workstation executable part was not found in the data set specified.
ISPF163
DLL not found - The workstation dynamic link library (DLL) part was not found in the data set specified.
ISPF164
Allocation failed - File allocation in preparation for invoking FTP failed. FTP was not invoked and the download was aborted.
ISPF170
Service error - Status2 aaaaaaaa returned from bbbbbbbb, cccccccc record-dddddddd
ISPF171
)DOT SCAN error - Incomplete SCAN parameter on )DOT, aaaaaaaa record-bbbbbbbb
ISPF172
)DOT SCAN error - Too many SCAN parameters on )DOT statement, aaaaaaaa record-bbbbbbbb
ISPF173
)DOT SCAN error - Invalid SCAN variable name on )DOT statement, aaaaaaaa record-bbbbbbbb
ISPF174
)DOT SCAN error - Invalid SCAN condition value on )DOT statement, aaaaaaaa record-bbbbbbbb
ISPF175
Too many DOs - DO stack is full, aaaaaaaa record-bbbbbbbb.
ISPF176
)DO error - )DO has no matching )ENDDO, aaaaaaaa record-bbbbbbbb.
ISPF177
)DO error - )ENDDO has no matching )DO, aaaaaaaa record-bbbbbbbb.
ISPF178
)SEL error - )SEL ends in wrong )DO, aaaaaaaa record-bbbbbbbb.
ISPF180
)DO error - )DO ends in wrong )IF or )SEL, aaaaaaaa record-bbbbbbbb
ISPF181
)DO error - )DO ends in wrong )DOT, aaaaaaaa record-bbbbbbbb
ISPF182
aaaaaaaa error - aaaaaaaa outside a )DO structure, bbbbbbbb record-cccccccc
ISPF183
)DO aaaaaaaa error - )DO aaaaaaaa internal logic error, bbbbbbbb record-cccccccc
ISPF184
Invalid )DO syntax - Invalid )DO Control variable name, aaaaaaaa record-bbbbbbbb
ISPF185
Invalid )DO syntax - Invalid numeric value in )DO control statement, aaaaaaaa record-bbbbbbbb
ISPF186
Invalid )DO syntax - Syntax of )DO control statement is invalid, aaaaaaaa record-bbbbbbbb
ISPF187
Invalid )DO syntax - )DO control statement contains duplicate aaaaaaaa keyword, bbbbbbbb record-cccccccc
ISPF188
Invalid )DO syntax - )DO control statement contains UNTIL and WHILE keywords, aaaaaaaa record-bbbbbbbb
ISPF189
Invalid )DO aaaaaaaa syntax - Syntax of )DO aaaaaaaa control statement is invalid, bbbbbbbb record-cccccccc
ISPF190
)ELSE error - )ELSE has no matching )IF, aaaaaaaa record-bbbbbbbb
ISPF191
)IF error - )IF missing THEN keyword, aaaaaaaa record-bbbbbbbb
ISPF192
)IF error - )IF has no statement, aaaaaaaa record-bbbbbbbb.
ISPF193
)ELSE error - )ELSE has no statement, aaaaaaaa record-bbbbbbbb.
ISPF194
aaaaaaaa error - aaaaaaaa outside a )DOT structure, bbbbbbbb record-cccccccc
ISPF195
Mismatched Parentheses - Parentheses are not paired correctly, aaaaaaaa record-bbbbbbbb
ISPF196
)ENDREXX error - )ENDREXX has no matching )REXX, aaaaaaaa record-bbbbbbbb.
ISPF197
)REXX error - )REXX has no matching )ENDREXX, aaaaaaaa record-bbbbbbbb.
ISPF198
System abend - REXX processing has generated a system abend aaaaaaaa, intercepted by bbbbbbbb, cccccccc record-dddddddd.
ISPF199
ESTAE error - Module aaaaaaaa received RC-bbbbbbbb from ESTAE.
ISPF200
Invalid aaaaaaaa Syntax - Function statement syntax not recognised on aaaaaaaa statement, bbbbbbbb record-cccccccc
ISPF201
Invalid Function - Unsupported function call, aaaaaaaa record-bbbbbbbb
ISPF202
Invalid Function Syntax - Too many subparameters specified for aaaaaaaa function, bbbbbbbb record-cccccccc.
ISPF203
aaaaaaaa Parm Missing - The bbbbbbbb function is missing the required aaaaaaaa parameter, cccccccc record-dddddddd.
ISPF204
Invalid aaaaaaaa Value - The bbbbbbbb function contains an invalid aaaaaaaa parameter value, cccccccc record-dddddddd.
ISPF205
Symbol name error - Invalid aaaaaaaa. symbol name, bbbbbbbb record-cccccccc.
ISPF206
Invalid aaaaaaaa Value - The bbbbbbbb function contains an invalid aaaaaaaa parameter that is Out of Range, cccccccc record-dddddddd.
ISPF210
Invalid Expression - Expression contains too many levels of nesting, aaaaaaaa record-bbbbbbbb
ISPF211
Invalid Expression - Length of expression exceeds 255 characters, aaaaaaaa record-bbbbbbbb
ISPF212
Mismatched parentheses - Parentheses are not paired correctly, aaaaaaaa record-bbbbbbbb
ISPF213
Invalid numeric - Expression contains an invalid numeric value, aaaaaaaa record-bbbbbbbb.
ISPF214
Invalid Operator - Expression contains an invalid operator, aaaaaaaa record-bbbbbbbb
ISPF215
Invalid Expression - Expression contains invalid characters, aaaaaaaa record-bbbbbbbb
ISPF216
Divide by Zero - An expression has attempted to divide by zero, aaaaaaaa record-bbbbbbbb
ISPF217
Arithmetic Overflow - An expression has resulted in an overflow condition, aaaaaaaa record-bbbbbbbb
ISPF220
Invalid Dialog Variable - Dialog Variable name for REXX processing is invalid, aaaaaaaa record-bbbbbbbb
ISPF221
REXX not found - Unable to locate REXX routine aaaaaaaa required for File Tailoring, bbbbbbbb record-cccccccc
ISPF222
REXX-defined error - File Tailoring REXX routine-defined error. ZFTXRC=aaaaaaaa..
ISPF223
REXX Termination - File Tailoring terminated by REXX routine setting ZFTXRC=aaaaaaaa, bbbbbbbb record-cccccccc.
ISPF224
REXX Failure - Severe error encountered processing a File Tailoring Rexx routine, aaaaaaaa record-bbbbbbbb, cccccccc return code-dddddddd
ISPF300
Trace complete - The Trace output has been written to SYSOUT allocated to the DDname ISPFTTRC.
ISPF301
Parameter Invalid - Parameter #aaaaaaaa is invalid. Valid parameters are: END, VIEW, LIST, QUIET, DISPLAY(), READ(), SKELETON(), SCREEN(), SERVICE(), and DEBUG.
ISPF302
Invalid skeleton name - The skeleton name specified for the SKELETON() parameter is invalid.
ISPF303
aaaaaaaa value missing - The value for aaaaaaaa parameter was omitted.
ISPF304
Invalid parameter value - The RECORDS() parameter values are invalid. Valid values are either '*', NONE, or a combination of: DATA, CNTL, SOURCE, or NODATA, NOCNTL, NOSOURCE.
ISPF305
Invalid parameter value - The SCREEN() parameter value is invalid. Valid values are: * (current), 0 (all), or a screen id in the range 1-9, A-W.
ISPF306
Invalid parameter value - The SERVICE() parameter value is invalid. Valid values are: NONE, DETAIL.
ISPF307
Invalid parameter value - The READ() parameter value is invalid. Valid values are: NONE, SUMMARY, DETAIL.
ISPF308
Invalid parameter value - The TBVARS() parameter value is invalid. Valid values are: NONE, DETAIL.
ISPF310
LIST substituted - File tailoring trace data set 'aaaaaaaa' not found. List of file tailoring trace data sets displayed
ISPF311
No trace data sets found - No ISPF file tailoring trace data set names were found matching 'aaaaaaaa'
ISPG001
Invalid option number - Select an option and enter the option number or code.
ISPG002
Enter project name - Project name is missing or invalid.
ISPG003
Enter group name - Group name is missing or invalid.
ISPG004
Enter type qualifier - Type is missing or invalid.
ISPG005
Enter member name - The specified data set is partitioned. A member name is required.
ISPG006
Enter volume serial - A volume serial is needed for this operation.
ISPG007
Vol serial not allowed - Use "Other data set name" field when specifying volume serial.
ISPG008
Invalid required parm - Select the required parameter from the options shown.
ISPG009
Enter data set name - Use standard TSO format for data set name.
ISPG010
Data set is open - Data set is currently being used by ISPF.
ISPG011
Jump function disabled - The NOJUMP attribute keyword has disabled the jump function for this field.
ISPG012
Panelid area warning - Panelid area is formatted by SYSNAME, USERID, PANELID and SCRNAME commands - in that order. There is insufficient space to display all the requested information. Current values are SYSNAME(aaaaaaaa), USERID(bbbbbbbb), PANELID(cccccccc) and SCRNAME(dddddddd).
ISPG020
I/O error during write - Unable to write data.
ISPG021
Member not found - The requested member was not found in the PDS directory(s).
ISPG024
Invalid scroll amount - Valid: M (MAX), P (PAGE), H (HALF), C (CSR), D (DATA) or aaaaaaaa to bbbbbbbb
ISPG026
No top panel defined - The ZHTOP dialog variable is not set to a panel name.
ISPG027
Option not implemented - Try another option.
ISPG028
Invalid selection - Valid codes are B, S, U, T or I, or a number if selection list present.
ISPG029
No index panel defined - The ZHINDEX dialog variable is not set to a panel name.
ISPG030
Invalid member name - Member name specified contains invalid characters.
ISPG031
No space in directory - PDS directory is full, allocate more directory blocks.
ISPG032
I/O error during STOW - Permanent I/O error occurred updating directory block.
ISPG033
Invalid command - Valid commands are SELECT (s) and LOCATE (l).
ISPG034
I/O error during STOW - Permanent I/O error occurred writing "EOF mark" after member.
ISPG035
Invalid select code - Type 's' for select in front of the member desired.
ISPG036
Compress data set - STOW error. STOW rc was r15=x'10' r0 was not 1 or 2. See sys programmer
ISPG037
I/O error - I/O error while reading PDS directory.
ISPG038
I/O error - I/O error return from BLDL (reading PDS directory).
ISPG039
Specify member name - Command specified requires a member name.
ISPG040
Invalid DSORG - Data set organization must be partitioned or sequential.
ISPG041
Interface error - Rc = 'aaaaaaaa' from TSO routine IKJADTAB, function = ENDTABLE
ISPG044
Concatenation failed - Unable to concatenate the specified libraries.
ISPG045
STAE macro error - Unable to obtain storage for STAE macro, subpool 0 full.
ISPG046
IKJTBLS interface error - Authorized table name 'aaaaaaaa' not recognized.
ISPG047
IRXTERMA interface error - ISPF received return code 'aaaaaaaa' from TSO routine IRXTERMA
ISPG048
TSO interface error - - Abend 'aaaaaaaa' dec, reason code 'bbbbbbbb' in TSO routine IKJTBLS
ISPG049
TSO interface error - - Abend 'aaaaaaaa' hex, reason code 'bbbbbbbb' in TSO routine IKJTBLS
ISPG050
aaaaaaaa is not active - The command or function key entered is not defined.
ISPG051
aaaaaaaa command error - The command or function key entered is defined incorrectly.
ISPG052
Invalid PANELID parm - Valid panelid parameters are ON, OFF, or blank.
ISPG053
Command is not active - The command or function key entered is not defined.
ISPG054
Command parm is missing - The entered command requires a parameter.
ISPG055
Invalid MSGID parm - Valid MSGID parameters are ON, OFF or blank.
ISPG056
The message ID of the last message was aaaaaaaa.
ISPG057
Line command error - A command is already in the line command field.
ISPG058
Line command error - The line with the cursor does not contain a line command field.
ISPG059
Data truncated - Command input string larger than command input buffer for this panel.
ISPG060
Invalid command name - A command entered or contained in a CLIST has invalid syntax.
ISPG061
Invalid command name - The command entered or contained in a CLIST is null (all blanks).
ISPG062
Invalid command - Unable to process command. IKJSCAN return code = aaaaaaaa.
ISPG063
Command rejected - Command rejected - 'aaaaaaaa' command not supported under ISPF.
ISPG063A
Command rejected - Command rejected - 'aaaaaaaa' command not supported when ISPF is invoked from a web client.
ISPG064
Command abend - User abend aaaaaaaa dec occurred processing command 'bbbbbbbb'.
ISPG065
Attach error - Unable to attach command 'aaaaaaaa'. Attach return code=bbbbbbbb.
ISPG066
Command abend - Abend aaaaaaaa hex occurred processing command 'bbbbbbbb'.
ISPG067
PUTGET error - PUTGET return code aaaaaaaa hex. Notify your system programmer.
ISPG068
Member name too long - Member name must be less than or equal to 8 characters.
ISPG069
No members in data set - The PDS specified contains no members.
ISPG070
IKJEFTSR interface error - Authorized command 'aaaaaaaa'. Return code = bbbbbbbb.. Reason code = cccccccc..
ISPG071
IKJEFTSR interface error - Authorized program 'aaaaaaaa'. Return code = bbbbbbbb.. Reason code = cccccccc..
ISPG072
Attention termination - Authorized program 'aaaaaaaa' was terminated by an attention.
ISPG073
Command abended - User abend aaaaaaaa dec occurred processing authorized command 'bbbbbbbb'.
ISPG074
BLDL error message - Error processing 'aaaaaaaa' command. BLDL return code was greater than 4.
ISPG075
Command abended - Abend aaaaaaaa hex occurred processing authorized command 'bbbbbbbb'.
ISPG076
Attention message - Command terminated due to attention.
ISPG077
Abend 806 - Command 'aaaaaaaa' abended with code 806000. Load module not found.
ISPG078
Program abend - User abend aaaaaaaa dec occurred processing authorized program 'bbbbbbbb'.
ISPG079
Program abend - Abend aaaaaaaa hex occurred processing authorized program 'bbbbbbbb'.
ISPG080
Inconsistent data sets - Data set organizations are not the same.
ISPG081
Data set not partitioned - Member name specified, but the data set is not a partitioned data set.
ISPG082
Data set not partitioned - Only partitioned data sets may be concatenated.
ISPG083
Deconcatenation failed - Unable to deconcatenate the specified libraries.
ISPG084
Reallocation failed - DAIR RC = aaaaaaaa dec, DARC = bbbbbbbb hex, dsn = 'cccccccc'
ISPG085
Deallocation failed - DAIR RC = aaaaaaaa dec, DARC = bbbbbbbb hex, dsn = 'cccccccc'
ISPG086
Delete data set failed - 'aaaaaaaa' is open, cannot be deleted.
ISPG087
Data set in use - The data set is currently in use by you.
ISPG088
Dsn ALLOC check failed - Unable to check if data set is already allocated.
ISPG090
Invalid data set name - Data set name contains unbalanced apostrophes.
ISPG091
Invalid data set name - Data set name must be 1-44 characters in length counting prefix (if any).
ISPG092
Invalid member name - Member name must be 1-8 characters and enclosed in parentheses.
ISPG093
Invalid data set name - Embedded blanks, parentheses, or apostrophes in data set name are invalid.
ISPG094
Data set not cataloged - Generation data set not found. Check catalog of generation group.
ISPG095
Inconsistent block size - The first library must have the largest block size.
ISPG096
Inconsistent record size - All libraries must have the same record length.
ISPG097
Inconsistent record type - All libraries must be the same record type.
ISPG098
Inconsistent record size - The first library must have the largest record length.
ISPG099
Not generation data set - Data set is not a generation data set.
ISPG100
Invalid data set org - Data set is not sequential or partitioned.
ISPG101
STAE failed - Unable to open data set. Possibly insufficient storage for STAE.
ISPG102
Invalid DSORG - Data set specified is a PDS, which is not allowed for this function.
ISPG103
Invalid record format - S type partitioned data sets are not supported by ISPF.
ISPG104
Invalid DSORG - Data set is sequential, which is not allowed for this function
ISPG105
Invalid block size - Block size of data set must not be zero.
ISPG106
Invalid record length - Record length exceeds maximum ('aaaaaaaa') allowed for this function.
ISPG107
Invalid record format - Fixed length records not supported for this function.
ISPG108
Invalid record length - LRECL must be 0 or equal to block size for unblocked RECFM=F.
ISPG109
Invalid block size - Data set block size is not a multiple of LRECL for RECFM=FB.
ISPG110
Invalid record format - Variable length records invalid for this function.
ISPG111
Invalid block size - Data set block size must be > 8 for RECFM=V.
ISPG112
Invalid record length - Data set LRECL must be > 4 for RECFM=V.
ISPG113
Invalid record length - LRECL and block size are inconsistent for RECFM=V data set.
ISPG114
Invalid record format - RECFM=U is not allowed for this function.
ISPG115
Invalid record format - Data set has record format not supported by ISPF. Must be F, V, or U.
ISPG116
Open failed - Unable to open data set. DCB open flag is not set.
ISPG117
Open failed - Open for data set 'aaaaaaaa' abended with abend code 'bbbbbbbb'.
ISPG118
Obtain failed - Unable to open data set. Obtain returned nonzero return code.
ISPG119
Invalid record format - ISPF does not support spanned records.
ISPG120
Empty data set or member - Empty PDS member or sequential data set has been requested.
ISPG121
I/O error - An I/O error was encountered reading the first record requested.
ISPG122
Insufficient storage - Not enough storage is available for browse to proceed.
ISPG123
Invalid type of data set - Data set has nonzero key. This data set is not supported by ISPF.
ISPG124
Invalid SYSNAME parm - Valid sysname parameters are ON, OFF, or blank.
ISPG125
Invalid USERID parm - Valid USERID parameters are ON, OFF, or blank.
ISPG129
SWAP LIST not available - The SWAP LIST command is not supported when ISPF is invoked from a web client.
ISPG130
Reserve failed - Abend occurred during reserve processing. Unable to open data set.
ISPG131
Unable to open data set - The dd that should be in the tiot cannot be found.
ISPG132
Authorization failed - You may not use this protected data set. Open 913 abend.
ISPG133
Insufficient storage - Not enough storage for buffer. Log on with larger SIZE parameter.
ISPG140
Error generating command - Proc contains invalid statement type.
ISPG142
Error generating command - Unable to FIND proc member in ISPSLIB library.
ISPG143
I/O error - I/O error FINDing proc. Notify system programmer.
ISPG144
Error generating command - Proc contains command continuation before COMMAND statement.
ISPG145
I/O error - I/O error reading proc. Notify system programmer.
ISPG146
Error generating command - Command generated exceeds command buffer length.
ISPG149
Specify required parm - The cursor is positioned at the blank or invalid parameter.
ISPG150
Error generating command - Invalid keyword in PROC.
ISPG151
Error generating command - Invalid data set name on PROC "ALLOC" statement.
ISPG152
Error generating command - PROC contains more than one "COMMAND" statement.
ISPG153
Error generating command - PROC contains invalid dsname on "FREEDSN" statement.
ISPG155
Error generating command - PROC contains invalid ddname on "ALLOC" statement.
ISPG156
Error generating command - PROC contains too many "ALLOC" statements. Max is 10.
ISPG157
Open error - Unable to open input data set. "SCANLIB" PROC statement may be in error.
ISPG158
Input member not found - The member specified cannot be found in the input data set(s).
ISPG159
Error generating command - PROC contains invalid dsname on "SCANLIB" statement.
ISPG162
Error generating command - Menu contains action statement with invalid name or "key".
ISPG166
I/O error - I/O error finding input data set member. Data set should be a PDS.
ISPG200
GDDM load failed. - Attempt to load GDDM was not successful.
ISPG201
Device not supported. - The ISPF/GDDM interface does not support the current device.
ISPG202
SPLIT not supported. - The ISPF/GDDM interface does not support SPLIT on the current device.
ISPG203
GDDM terminated. - The user selected to terminate the GDDM initialization.
ISPG204
GRINIT failure - GDDM cannot be initialized since a specified ISPSTART GUISCRD or GUISCRW value is different than the actual host screen size.
ISPG205
GRINIT failure - GDDM cannot be initialized when running GUI in Batch Mode.
ISPG208
ISPG208 GDDM error - function = Return code =
ISPG209
ISPG209 GDDM error message -
ISPG210
Invalid SWAPBAR parm - Valid SWAPBAR parameters are ON, OFF, /, or blank.
ISPG211
Invalid value - Valid values are / or blank.
ISPG212
Invalid value - Valid values are 'S', 'C', 'D' or blank.
ISPG213
Invalid value - Valid values are: 0 or 1
ISPG214
Invalid value - Valid values are 'N', 'B', 'R', 'U' or blank.
ISPH001
TRANS parameter error - "FRMCCSID(aaaaaaaa)" is not the required 5 numeric digits.
ISPH002
TRANS parameter error - "TOCCSID(aaaaaaaa)" is not the required 5 numeric digits.
ISPH003
TRANS parameter error - "LENGTH(aaaaaaaa)" must be a numeric value from 0 to 32767.
ISPH004
CCSID TRANSlate error - Translate tables do not support "aaaaaaaa" to "bbbbbbbb", (cccccccc).
ISPI001
ISPI001 Invalid screen size. The width cannot exceed 160 and the depth cannot exceed 62
ISPI002
ISPI002 Following file could not be opened:
ISPI003
ISPI003 Following file was not preallocated:
ISPI004
ISPI004 Unidentified ISPF system error specified.
ISPI005
ISPI005 User character translation discontinued
ISPI006
ISPI006 Following file has invalid data set characteristics
ISPI007
ISPI007 ISPF command not allowed. You are already under ISPF
ISPI009
ISPI009 Following required module for selected language could not be loaded:
ISPI010
ISPI010 Invalid environment, TSO/E 2.1 or later required.
ISPI011
ISPI011 Invalid environment, ISPF version 4 requires TSO/E 2.1 or later
ISPI012
ISPI012 Invalid IP address
ISPI013
Invalid environment for a workstation connection.
ISPI021
ISPI021 Unrecoverable error in initialization of
ISPI022
ISPI022 ISPF cannot continue. ISPF abending.
ISPI023
ISPI023 ENVIRON TERMTRAC definition OFF, buffer could not be obtained
ISPI024
ISPI024 TSO module IRXECUSP could not be loaded
ISPI025
ISPI025 TSO routine IRXINIT severe error - REXX environment could not be initialized.
ISPJ001
Load error - 'aaaaaaaa' load module not found.
ISPJ002
Load error - 'aaaaaaaa' translate table load module not found or in error
ISPL010
Invalid variable name - LIST service variable name, 'aaaaaaaa', is syntactically incorrect.
ISPL011
Variable not found - LIST service dialog variable, 'aaaaaaaa', does not exist.
ISPL012
Invalid line length - Minimum LIST service line length is one when CC is specified.
ISPL013
Invalid variable value - LIST service variable, 'aaaaaaaa', cannot be null when CC is specified.
ISPL014
Invalid line length - LIST service line length must be greater than or equal to 0.
ISPL015
LIST data set error - Severe error occurred when allocating/opening the LIST data set.
ISPL016
LIST not available - Error previously encountered when allocating the LIST data set.
ISPL017
LIST not available - Error previously encountered when opening/writing to the LIST data set.
ISPL018
LIST data set error - Severe error occurred when writing to the LIST data set.
ISPL030
Command not allowed - aaaaaaaa not allowed while aaaaaaaa disposition or termination panel is active.
ISPL031
Data set not active - The aaaaaaaa data set is not allocated or has not been used this session.
ISPL032
Command not active - The aaaaaaaa data set cannot be processed when it has been preallocated.
ISPL033
aaaaaaaa job not submitted - aaaaaaaa print job cannot be submitted while file tailoring is active.
ISPL034
aaaaaaaa data set in use - aaaaaaaa data set cannot be processed while data set is in use.
ISPL035
Invalid aaaaaaaa command - Valid aaaaaaaa parameters are PRINT, KEEP, DELETE, or blank.
ISPL036
Invalid command - First parameter to ISPLLP must be LOG or LIST.
ISPL101
LIBDEF display error - The ISPLIBD utility detected an unexpected decimal return code aaaaaaaa from the "bbbbbbbb" service.
ISPL102
Enter aaaaaaaa parameter - Enter a specific library name for the aaaaaaaa command.
ISPL103
Invalid library name - "aaaaaaaa" is not a valid LIBDEF library name. The library name must be 1 to 8 characters long and cannot be ISPPROF.
ISPL104
Invalid command - "aaaaaaaa" is not a valid command for the ISPLIBD utility.
ISPL105
Library name invalid - "aaaaaaaa" is not a valid LIBDEF library name. The library name must be 1 to 8 characters long and cannot be ISPPROF. The value is ignored.
ISPL106
ISPLIBD recursion - The ISPLIBD command may not be issued recursively within the same logical screen.
ISPLO999
Licensed Materials - Property of IBM 5694-A01 Copyright IBM Corp. 1980, 2013. All rights reserved. US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
ISPN101
Storage release error - Error occurred when releasing application library blocks.
ISPN102
Storage obtain error - Error occurred when obtaining storage for application library blocks.
ISPN103
Invalid LIBDEF type - ISPPROF is not a valid LIBDEF type.
ISPN104
Invalid dsname list - Data set name(s) incorrectly specified.
ISPN105
Multiple ddnames - Only one ddname may be specified when LIBRARY is specified.
ISPN106
Ddname not allocated - Ddname 'aaaaaaaa' specified on LIBDEF service not allocated.
ISPN107
Member name specified - Data set member specification is invalid.
ISPN108
Invalid dsname framing - Dsname specification contains inconsistent framing characters.
ISPN109
Invalid dsname length - Data set name specification cannot exceed 44 characters.
ISPN110
Invalid library ddname - EXCLDATA or EXCLLIBR must be specified with ISPLLIB.
ISPN111
Deallocation failure - Deallocation failure - check allocated data sets.
ISPN112
Invalid volume serials - Volume serials operand incorrectly specified.
ISPN113
Too many parameters - Too many parameters specified on the LIBDEF service.
ISPN114
Authorization failure - Authorization failure from LIBDEF exit point.
ISPN115
Severe error - Severe error from LIBDEF exit point.
ISPN116
Severe error - Maximum number of 15 data set names has been exceeded by 'aaaaaaaa' when using LIBDEF STKADD parameter.
ISPN117
Severe error - The LIBDEF STKADD parameter is invalid when used with the EXCLDATA, LIBRARY, or EXCLLIBR parameters. STKADD is only valid with the DATASET parameter.
ISPO001
Selection panel error - "aaaaaaaa." is invalid parameter for program ISPOPT on panel "bbbbbbbb".
ISPO002
Inconsistent parameters - 24 function keys are valid only for 3278, 3278CF, 3278KN, 3290 terminal types.
ISPO003
Invalid pad character - Input field pad character and command delimiter may not be the same.
ISPO004
Invalid value - Press Help for tutorial page giving valid options.
ISPO005
Inconsistent parameters - Part may not be specified with 3278T.
ISPO006
Display format invalid - Display format must be NO, SHORT, or LONG.
ISPO007
F key value required - A function key must be assigned a value in order to have a display format.
ISPO008
F key value required - A function key must be assigned a value in order to have a label.
ISPO009
Invalid selection - Enter a keylist name or select an existing keylist.
ISPO010
Keylist does not exist - The keylist selected does not exist; therefore, it cannot be changed.
ISPO011
Keylist already exists - The keylist name entered already exists; therefore, it cannot be created.
ISPO012
Keylist not saved - The keylist changes were not saved or the keylist was not created.
ISPO013
Keylist not selected - Enter a keylist name or select one from the list and select an action.
ISPO014
Keylist does not exist - The keylist selected does not exist; therefore, it cannot be browsed.
ISPO015
Keylist in use - The selected keylist is currently being updated by you.
ISPO016
Delete Warning - This keylist belongs to a currently running application. If this keylist is deleted, a dialog error can occur if a current application panel references this keylist.
ISPO017
Keylist tables in use - The internal tables used by keylist are presently in use.
ISPO018
Invalid Action - The action selected is not defined for the keylist utility.
ISPO019
Keylist saved - The keylist changes were saved or the keylist was created.
ISPO020
Invalid keylist name - The specified keylist name is invalid.
ISPO021
Updates not allowed - No modifications will be accepted while editing or browsing a keylist.
ISPO022
Input command error - Command entered is not recognized.
ISPO023
Keylist not altered - The keylist was not altered, therefore it is not saved.
ISPO024
Keylist not deleted - The keylist was not found so it cannot be deleted.
ISPO025
Keylist not deleted - The keylist selected is not a private copy of the keylist.
ISPO026
Profile not created - The profile table could not be created and is required for keylist. **** aaaaaaaa ****
ISPO027
Keylist not saved - Internal error code aaaaaaaa resulted in the keylist not being saved. **** bbbbbbbb ****
ISPO028
Invalid Help name - The specified keylist Help panel name is invalid.
ISPO029
Keylist deleted - The selected keylist was deleted.
ISPO030
Invalid color - Enter valid color of: BLUE, RED, PINK, GREEN, TURQ, YELLOW, or WHITE.
ISPO031
Invalid intensity - Enter valid intensity value of: LOW or HIGH.
ISPO032
Invalid highlighting - Enter valid highlight value of: BLINK, REVERSE, NONE, or USCORE.
ISPO033
Invalid ISPFVAR parm - The ISPFVAR command only accepts the ABTAB, PSTAB, JUMP, EDPRT, SESM, LMSG, and SPLTLINE parameters. The values may be set by specifying (ON) or (OFF) immediately after the parameter. For example, ISPFVAR ABTAB(ON).
ISPO034
Keylist not deleted - The keylist was not deleted due to user's request.
ISPO035
Select a file action - Select a file action bar item to set a default "/" action. The default action will remain set until a different file action is selected, the keylist view is changed, or keylist utility is terminated.
ISPO036
IPV6 session - WSCON was invoked on a Telnet session that is IPV6 enabled. WSA does not support an IPV6 address.
ISPO900
Invalid codepage and character set values were specified.
ISPO901
Enter required field - Enter required field at the cursor position.
ISPO902
Valid input field pad values are anything but A-Z, 0-9 and /, except N which indicates nulls and B which indicates blanks. It must also be different than the command delimiter.
ISPO903
Valid command delimiters are anything but A-Z and 0-9 and = or .
ISPO904
Invalid value - When running in GUI mode, you must select 'Panel display CUA mode'.
ISPO905
Starting a GUI session when running in split screen mode or 3290 partition mode is not supported.
ISPO906
Cannot connect to the workstation. Ensure that the communications from z/OS to the workstation are functioning and that the correct level of the ISPF Client/Server component is running on the workstation. Also, make sure that you entered the correct machine address.
ISPO907
GUI mode cannot be invoked recursively. Either you are currently in GUI mode or at least one of your logical screens has been displayed in GUI mode prior to a SWITCH 3270 command. If you do not have an active workstation agent (WSA), enter the WSDISCON command, restart your WSA, and then enter the WSCON command to initiate a workstation connection.
ISPO908
Already connected - This session is already connected to the workstation (aaaaaaaa).
ISPO909
Connected - A connection has been successfully made to the workstation (aaaaaaaa).
ISPO910
The address for the workstation display must be the same as the address already established for the workstation connection (aaaaaaaa).
ISPO911
Connecting to a workstation when running 3290 partition mode is not supported.
ISPO912
Enter required field - Enter user ID default at the cursor position.
ISPO913
Valid values: FBA or VBA
ISPO914
Valid values: 1 to 999 for FBA and 5 to 999 for VBA
ISPO915
Valid values: 80 to 160
ISPO916
Changing the "Always show split line" setting has no effect in partition mode.
ISPO917
You cannot initiate a GUI display while in split screen mode. Exit all but one screen and try again or select option 2 to connect to the workstation without a GUI display.
ISPO918
Changing the CUA colors will have no effect in GUI mode unless you have selected to use host colors on all fields in the Global Color utility available from the COLOR command or the Color action bar choice on the ISPF Settings panel.
ISPO919
Valid number of keys are: 12 or 24
ISPO920
Unable to communicate with ISPF workstation agent at specified network address. Probable causes: (1) the workstation agent is not active at the specified network address; (2) the APPC transaction program names or TCP/IP port numbers specified are not identical on the host and on the workstation. Network data:'aaaaaaaa'.
ISPO921
Unable to communicate with workstation at the specified network address. Probable causes: (1) the specified network address does not exist or cannot be accessed; (2) if specified, the SNA network address does not support APPC communication. Network data:'aaaaaaaa'.
ISPO922
Unable to utilize local communications subsystem. Probable causes: (1) the communications interface modules could not be loaded; (2) the communications subsystem did not provide an acceptable response to the initialization request. Network data:'aaaaaaaa'.
ISPO923
Unable to connect to the workstation. Ensure that the communications from MVS to the workstation are functioning and that the correct level of the ISPF Client/Server component is running on the workstation. Network data:'aaaaaaaa'.
ISPO924
Unable to connect to the workstation because the user at the workstation rejected the connection request.
ISPO925
You have already connected to the workstation with codepage 'aaaaaaaa' and character set 'bbbbbbbb'. The new values you specified will be ignored on your GUI display.
ISPO926
Enter required field - Enter system name default at the cursor position.
ISPO927
Unable to connect to the workstation. ISPDTPRF DDNAME is not allocated or the profile data file allocated to ISPDTPRF cannot be opened.
ISPO928
Unable to connect to the workstation. The profile data file allocated to ISPDTPRF DDNAME cannot be read.
ISPO929
Unable to connect to the workstation. A WORKSTAT keyword defining an address for your user ID was not found in the profile data file allocated to ISPDTPRF DDNAME.
ISPO930
Enter required field - Enter message identifier default at the cursor position.
ISPO931
Enter required field - Enter panel identifier default at the cursor position.
ISPO932
Enter required field - Enter screen name default at the cursor position.
ISPO933
Download error RC=aaaaaaaa: An unexpected error related to the host or host data set, causing the download of the workstation agent to fail. Verify the host data set, retry the download, or use the Client/Server Component Download function of the ISPF Utilities panel to download the workstation agent manually.
ISPO934
Download error RC=aaaaaaaa: An error related to the workstation or workstation file caused the download of the workstation agent to fail. Check the directory or try another directory.
ISPO935
Download error RC=aaaaaaaa: An unexpected error caused the download of the workstation agent to fail. Retry the download or use the Client/Server Component Download function of the ISPF Utilities panel to download the workstation agent manually.
ISPO936
Terminal type warning - The terminal type you have selected may be incompatible with the current ISPF language setting and can lead to unpredictable results.
ISPO937
Agent not downloaded - The new workstation agent was not downloaded. You may download the agent manually using the Client/Server Component Download function of the ISPF Utilities panel.
ISPO938
You are using a downlevel version of the ISPF workstation agent. Use the Client/Server Component Download function from the ISPF Utilities panel to download the latest version.
ISPO939
Unable to establish a pre-initialized Language Environment for use by the Client/Server application or the z/OS UNIX directory list utility. Possible causes: (1) The LE run-time library data set CEE.SCEERUN is not in STEPLIB or LNKLST. (2) Insufficient virtual storage to initialize LE and C/C++.
ISPP000
ISPF Log continued - - - Session # aaaaaaaa -------------------------------------------------------
ISPP001
Start of ISPF Log - - - - Session # aaaaaaaa -------------------------------------------------------
ISPP002
End of ISPF Log - - - - - Session # aaaaaaaa -------------------------------------------------------
ISPP003
ISPF Log continued - - - Session # not available ----------------------------------------------
ISPP004
***** Dialog Error ***** - Application(aaaaaaaa); Function bbbbbbbb (cccccccc); Service(dddddddd)
ISPP005
Line from panel: - aaaaaaaa
ISPP006
Line from cmd: - aaaaaaaa
ISPP007
Line from skeleton: - aaaaaaaa
ISPP008
Trace: Command line - 2ND LEVEL MSG NOT USED!!!, INSERTED DIRECTLY IN TLD BY SEP
ISPP009
Start of ISPF Log - - - - Session # not available ----------------------------------------------
ISPP011
ISPF subtask abend - Completion code = aaaaaaaa (No other information available.)
ISPP012
ISPF subtask abend - VS aaaaaaaa ISPF bbbbbbbb System abend code = cccccccc (HEX) PSW dddddddd eeeeeeee
ISPP013
Name aaaaaaaa EPA bbbbbbbb ISPSUBS EPA cccccccc ISPTSI addr dddddddd
ISPP014
Registers at - R0 aaaaaaaa R1 bbbbbbbb R2 cccccccc R3 dddddddd
ISPP015
Entry to - R4 aaaaaaaa R5 bbbbbbbb R6 cccccccc R7 dddddddd
ISPP016
Abend - R8 aaaaaaaa R9 bbbbbbbb R10 cccccccc R11 dddddddd
ISPP017
R12 aaaaaaaa R13 bbbbbbbb R14 cccccccc R15 dddddddd
ISPP018
Reason code associated with abend = aaaaaaaa
ISPP019
ISPF subtask abend - VS aaaaaaaa ISPF bbbbbbbb User abend code = cccccccc (DECIMAL) PSW dddddddd eeeeeeee
ISPP020
aaaaaaaa data set kept - bbbbbbbb cccccccc has been kept.
ISPP021
aaaaaaaa data set deleted - bbbbbbbb cccccccc has been deleted.
ISPP022
aaaaaaaa print job submitted - bbbbbbbb cccccccc will be printed/deleted by job dddddddd.
ISPP022B
aaaaaaaa print job submitted - bbbbbbbb cccccccc will be printed and kept by job dddddddd.
ISPP023
aaaaaaaa data set printed - bbbbbbbb cccccccc has been queued to dddddddd and deleted.
ISPP023B
aaaaaaaa data set printed - bbbbbbbb cccccccc has been queued to dddddddd and kept.
ISPP024
aaaaaaaa print job error - bbbbbbbb cccccccc has been kept because of submit error.
ISPP025
aaaaaaaa not printed. - ISPP025 - ISPF Print RC = bbbbbbbb. See ISPF Messages and Codes. cccccccc dddddddd has been kept.
ISPP026
aaaaaaaa bbbbbbbb has been kept.
ISPP027
aaaaaaaa bbbbbbbb was preallocated (no free was done).
ISPP028
Print utility exit - The print utility exit produced a return code of aaaaaaaa when processing bbbbbbbb cccccccc.
ISPP028B
Print utility exit - The print utility exit produced a return code of aaaaaaaa on request for batch job bbbbbbbb.
ISPP031
Specify required field - Specify either the batch sysout class or the printer ID or the writer-name.
ISPP032
Duplicate specification - For Batch output, specify the batch sysout class. For local output, specify either the printer ID or the writer-name.
ISPP033
Profile sharing active - The additional qualifier for ISPF temporary data sets, by default set to ISP&aaaaaaaa by the Profile Sharing facility, might prevent the reallocation of the same Log/List data sets in the next session.
ISPP034
Check qualifier - The Multi-Logon Profile Sharing feature is enabled and an additional qualifier for ISPF temporary data sets was specified. Make sure that this qualifier is unique within the sysplex, else unpredictable results might occur.
ISPP040
.ALARM not set - ALARM keyword specified on short message but it was not set.
ISPP041
.HELP has no panel name - The HELP keyword was specified on short message but with no panel name.
ISPP043
No message ID was found - The message ID was blank.
ISPP044
Member not found - The member that should contain the message was not found.
ISPP045
Invalid message ID - The last character of the message ID was invalid.
ISPP046
Invalid message ID - The message ID contains more than 5 characters.
ISPP047
Invalid member name - The member name does not end in two numerics.
ISPP048
I/O error or end-of-file - An I/O error or end-of-file was encountered before message was found.
ISPP049
Leading quote missing - The leading quote was missing from either the long or short message.
ISPP100
Panel 'aaaaaaaa' error - Panel not found.
ISPP101
Panel 'aaaaaaaa' error - Old style menu format found.
ISPP102
Panel 'aaaaaaaa' error - I/0 error or other BLDL error in retrieving panel.
ISPP103
Panel 'aaaaaaaa' error - Attribute character found has already been defined.
ISPP104
Panel 'aaaaaaaa' error - More than bbbbbbbb attribute characters are defined.
ISPP105
Panel 'aaaaaaaa' error - DEFAULT keyword out of order in )ATTR section of panel.
ISPP106
Panel 'aaaaaaaa' error - Invalid attribute keyword value.
ISPP107
Panel 'aaaaaaaa' error - Invalid attribute keyword value type (not a literal or dialog var).
ISPP108
Panel 'aaaaaaaa' error - Right parenthesis not found where expected for keyword.
ISPP109
Panel 'aaaaaaaa' error - Invalid keyword found within the )ATTR section.
ISPP110
Panel 'aaaaaaaa' error - Attribute keyword found before an attribute character.
ISPP111
Panel 'aaaaaaaa' error - Illegal characters or statement type found in )ATTR section.
ISPP112
Panel 'aaaaaaaa' error - 3 distinct, legal attribute characters not found with DEFAULT keyword
ISPP113
Unable to get save area - Additional storage needed is unavailable for display processing.
ISPP114
Panel 'aaaaaaaa' error - REFRESH is not permitted for a graphic area.
ISPP115
Panel 'aaaaaaaa' error - Ampersand (&), blank, or null is invalid as an attribute character.
ISPP116
Panel 'aaaaaaaa' error - Unable to process redisplay request, last thing displayed not a panel.
ISPP117
Panel 'aaaaaaaa' error - The maximum of bbbbbbbb nested panel definitions has been exceeded.
ISPP118
Panel 'aaaaaaaa' error - Invalid cursor field/area specified as a parameter.
ISPP119
Panel 'aaaaaaaa' error - Attempting to redisplay a panel that was never successfully created.
ISPP120
Panel 'aaaaaaaa' error - )BODY section of panel not found when expected.
ISPP121
Panel 'aaaaaaaa' error - Panel definition too large, greater than screen size.
ISPP122
Panel 'aaaaaaaa' error - Invalid statement or keyword on )BODY heading statement.
ISPP123
Panel 'aaaaaaaa' error - The command field length is greater than 255.
ISPP124
Panel 'aaaaaaaa' error - Panel record longer than given (or defaulted) screen width to be used.
ISPP125
Panel 'aaaaaaaa' error - Duplicate panel field (or area) name defined.
ISPP126
Panel 'aaaaaaaa' error - Panel field name (or area name) exceeds maximum length of bbbbbbbb..
ISPP127
Panel 'aaaaaaaa' error - Field or area name missing following identifying attribute character.
ISPP128
Panel 'aaaaaaaa' error - Shadow variable name must follow area name.
ISPP129
Panel 'aaaaaaaa' error - String of CLEAR name values exceeds maximum size of 255 characters.
ISPP130
Panel 'aaaaaaaa' error - A panel section is out of order or has already been defined.
ISPP131
Panel 'aaaaaaaa' error - Required )BODY records not found following heading.
ISPP132
Panel 'aaaaaaaa' error - Invalid keyword found in )INIT, )REINIT, or )PROC section.
ISPP133
Panel 'aaaaaaaa' error - Invalid statement found within )INIT, )REINIT, or )PROC section.
ISPP134
Panel 'aaaaaaaa' error - Invalid statement or keyword found on section heading.
ISPP135
Panel 'aaaaaaaa' error - Invalid statement type. Name may need to be enclosed in apostrophes.
ISPP136
Panel 'aaaaaaaa' error - Something other than an "=" operator found in an assignment statement.
ISPP137
Panel 'aaaaaaaa' error - Table display panel, duplicate )MODEL statement found.
ISPP138
Panel 'aaaaaaaa' error - Invalid "clear" keyword value (not a literal or dialog variable).
ISPP139
Panel 'aaaaaaaa' error - Something other than CLEAR or ROWS keyword found on )MODEL header statement.
ISPP140
Panel 'aaaaaaaa' error - Built-in function in the assignment statement is not recognized.
ISPP141
Panel 'aaaaaaaa' error - Invalid assignment statement.
ISPP142
Panel 'aaaaaaaa' error - Invalid statement type.
ISPP143
Panel 'aaaaaaaa' error - Invalid statement type.
ISPP144
Panel 'aaaaaaaa' error - The max of bbbbbbbb levels of nested built-in functions has been exceeded.
ISPP145
Panel 'aaaaaaaa' error - Invalid nested keyword used within a built-in function.
ISPP146
Panel 'aaaaaaaa' error - Invalid built-in function variable specified.
ISPP147
RESTORE request error - A CONTROL RESTORE service request was issued, for which there was no matching CONTROL SAVE.
ISPP148
Panel 'aaaaaaaa' error - At least one of the CLEAR names listed is not a panel field name.
ISPP149
Panel 'aaaaaaaa' error - The REFRESH statement is invalid within the )INIT section.
ISPP150
Panel 'aaaaaaaa' error - No )END found before reaching end of file.
ISPP151
Panel 'aaaaaaaa' error - I/O error in retrieving panel (CDG).
ISPP152
Panel 'aaaaaaaa' error - Invalid CDG return code, system error.
ISPP153
Panel 'aaaaaaaa' error - Invalid quoted string, end quote or continuation ("+") missing.
ISPP154
Panel 'aaaaaaaa' error - Illegal use of "¬=" operator.
ISPP155
Panel 'aaaaaaaa' error - A dialog variable name must have a minimum length of bbbbbbbb. and must not exceed a maximum length of cccccccc. characters.
ISPP156
Panel 'aaaaaaaa' error - Unrecognized keyword.
ISPP157
Panel 'aaaaaaaa' error - Unrecognized control variable.
ISPP158
Panel 'aaaaaaaa' error - Invalid field/area name assigned to the .CURSOR control variable.
ISPP159
Panel 'aaaaaaaa' error - Invalid response value assigned to the .RESP control variable.
ISPP160
Panel 'aaaaaaaa' error - Invalid variable name, (may need to be enclosed in apostrophes)
ISPP161
Panel 'aaaaaaaa' error - Invalid variable name, (may need to be enclosed in apostrophes).
ISPP162
Panel 'aaaaaaaa' error - Invalid variable name, (may need to be enclosed in apostrophes)
ISPP163
Panel 'aaaaaaaa' error - Invalid TRANS value (not a literal or dialog variable).
ISPP164
Panel 'aaaaaaaa' error - Invalid TRANS msg= value (not a literal or dialog variable).
ISPP165
Panel 'aaaaaaaa' error - TRUNC value is not a numeric or single character.
ISPP166
Panel 'aaaaaaaa' error - Invalid TRUNC value (not a literal or dialog variable).
ISPP167
Panel 'aaaaaaaa' error - Invalid IF keyword value (not a literal, dialog or control variable).
ISPP168
Panel 'aaaaaaaa' error - Invalid IF keyword operator found.
ISPP169
Panel 'aaaaaaaa' error - Invalid IF logical expression (not a dialog or control variable or VER statement construct).
ISPP170
Panel 'aaaaaaaa' error - Invalid ATTR keyword value (dialog var) found while initializing panel.
ISPP171
Panel 'aaaaaaaa' error - Invalid value for TYPE keyword found while initializing panel.
ISPP172
Panel 'aaaaaaaa' error - Invalid TRUNC value (dialog var) found while processing panel.
ISPP173
Panel 'aaaaaaaa' error - More than bbbbbbbb entries specified for a tutorial TRANS function.
ISPP174
Panel 'aaaaaaaa' error - Invalid value for a verify PICT string found while processing panel.
ISPP175
Panel 'aaaaaaaa' error - Invalid value for a verify RANGE limit found while processing panel.
ISPP176
Panel 'aaaaaaaa' error - Invalid .CURSOR value found while processing panel.
ISPP177
Panel 'aaaaaaaa' error - Invalid .RESP value found while processing panel.
ISPP178
Panel 'aaaaaaaa' error - Conversion or truncation problem found while attempting to store variable 'bbbbbbbb'.
ISPP179
Panel 'aaaaaaaa' error - Shadow variable name exceeds maximum length of bbbbbbbb.
ISPP180
Panel 'aaaaaaaa' error - Verification TYPE unrecognized.
ISPP181
Panel 'aaaaaaaa' error - Invalid VERIFY value (not a literal or dialog variable).
ISPP182
Panel 'aaaaaaaa' error - Invalid VERIFY msg= value (not a literal or dialog variable).
ISPP183
Panel 'aaaaaaaa' error - Incorrect # of VERIFY values for verification type indicated.
ISPP184
Panel 'aaaaaaaa' error - Invalid VERIFY picture string given.
ISPP185
Panel 'aaaaaaaa' error - Invalid VERIFY range value given.
ISPP186
Panel 'aaaaaaaa' error - Invalid VERIFY type given (second parameter must be a literal).
ISPP187
Panel 'aaaaaaaa' error - Invalid VERIFY variable (must be a dialog variable).
ISPP188
Panel 'aaaaaaaa' error - Maximum of 100 list values exceeded on VER statement.
ISPP189
Panel 'aaaaaaaa' error - Control variable compare value too long, maximum length is 8 bytes.
ISPP190
Enter required field - Enter required field at the cursor position.
ISPP190A
Missing field definition - The field definition 'aaaaaaaa' is missing in the panel )BODY section. When the field definition is missing, the cursor position is unpredictable.
ISPP191
Must be alphabetic - Enter alphabetic characters (A-Z, a-z, #, $, or @).
ISPP192
Must be hexadecimal - Enter hexadecimal characters (0-9, A-F, a-f).
ISPP193
Must be numeric - Enter numeric characters (0-9).
ISPP194
Value out of range - Enter a numeric value between aaaaaaaa. and bbbbbbbb.
ISPP195
Invalid value - Enter one of the listed values ('aaaaaaaa').
ISPP195A
Invalid value - Enter one of the listed values ('aaaaaaaa') .
ISPP196
Must be a bit string - Enter all '0's or '1's.
ISPP197
Invalid fileid - Variable must contain a fileid (CMS syntax), valid with a LISTFILE command.
ISPP198
Must be numeric - Enter a numeric value between 'aaaaaaaa' and 'bbbbbbbb'.
ISPP199
Invalid value - Field has failed verification. Reenter or press the End key.
ISPP200
Invalid name - Enter up to 8 alphanumeric chars (first must be alphabetic).
ISPP200A
Invalid member name - The member name entered as part of the data set name is invalid. Enter up to 8 alphanumeric chars (first must be alphabetic) or valid GDG suffix.
ISPP201
Invalid name - Enter a name of 1 to 8 alphanumeric characters.
ISPP202
Invalid sign - Press the Help key for additional information.
ISPP203
Invalid delimiter - Press the Help key for additional information.
ISPP204
Invalid decimal - Press the Help key for additional information.
ISPP205
Panel 'aaaaaaaa' error - Invalid VERIFY length operator.
ISPP206
Panel 'aaaaaaaa' error - VERIFY length must be numeric.
ISPP207
Panel 'aaaaaaaa' error - Invalid VERIFY length operator found while processing panel.
ISPP208
Panel 'aaaaaaaa' error - Invalid VERIFY numeric length found while processing panel.
ISPP209
Invalid length - The length of the data must be aaaaaaaa. bbbbbbbb..
ISPP210
Invalid DSN - quotes - Data set name contains unbalanced apostrophes; reenter dsname.
ISPP211
Invalid DSN - member - Member name of data set name must be 1-8 chars and enclosed in ( ).
ISPP212
Invalid DSN - length - Dsname must be 1-44 chars in length, including prefix. Reenter dsname.
ISPP213
Invalid DSN - syntax - Dsname must not end with a period. Reenter dsname.
ISPP214
Invalid DSN - syntax - Dsname contains embedded blanks, parentheses or apostrophes. Reenter.
ISPP215
Invalid DSN - qualifier - A data set name qualifier must contain from 1-8 characters. Reenter.
ISPP216
Invalid DSN - qualifier - Each qualifier must be 1-8 alphanumeric characters, the first alphabetic.
ISPP217
Invalid number - A valid number contains at least one digit (0-9).
ISPP218
Invalid name - Enter up to 8 alphanumeric characters (first cannot be numeric).
ISPP219
DSN too long - The field "aaaaaaaa" does not have enough space defined for ISPF to add a closing quote and/or closing parenthesis to the data set name.
ISPP220
Invalid string - Character number 'aaaaaaaa' must be alphabetic (A-Z, a-z, #, $, or @).
ISPP221
Invalid string - Character number 'aaaaaaaa' must be numeric (0-9).
ISPP222
Invalid string - Character number 'aaaaaaaa' must be hexadecimal (0-9, A-F, a-f).
ISPP223
Invalid string - Character number 'aaaaaaaa' must be 'bbbbbbbb'.
ISPP224
Invalid string - aaaaaaaa characters are required in the format, 'bbbbbbbb'.
ISPP225
Panel 'aaaaaaaa' error - Specify 1 compare value for IF when operator is 'bbbbbbbb'.
ISPP226
Panel 'aaaaaaaa' error - An ELSE in column 'bbbbbbbb' did not match a previous IF statement.
ISPP227
Panel 'aaaaaaaa' error - Specify 255 or less IF compare values for operator 'bbbbbbbb'.
ISPP228
Panel 'aaaaaaaa' error - MSG= parameter is illegal in IF statement VER logical expression.
ISPP229
Panel 'aaaaaaaa' error - The IF statement has an illegal format. More than 255 logical expressions have been specified.
ISPP230
Panel 'aaaaaaaa' error - Scroll input field not second input field or not 4 chars long.
ISPP231
Panel 'aaaaaaaa' error - Command input field not first input field or less than 8 chars long.
ISPP232
Invalid length - Command chain length exceeds the allowable maximum of 255.
ISPP233
Invalid variable name - Variable 'aaaaaaaa' could not be retrieved by ISPDVCGT.
ISPP234
Panel 'aaaaaaaa' error - The IF statement has an illegal format. A Boolean operator is specified with no following logical expression.
ISPP235
Panel 'aaaaaaaa' error - Invalid LISTV value given for VERIFY statement (must be a dialog variable).
ISPP236
Panel 'aaaaaaaa' error - Invalid syntax on IF statement. Right parenthesis or Boolean operator is missing.
ISPP237
Panel 'aaaaaaaa' error - No *ENDREXX statement found to terminate inline Rexx.
ISPP238
Panel 'aaaaaaaa' error - Default keyword must contain only 3 characters or a right parenthesis is missing.
ISPP240
Panel 'aaaaaaaa' error - .ZVARS value, with "Z" replacement names, not found when expected.
ISPP241
Panel 'aaaaaaaa' error - Number of .ZVARS field names does not equal number of "Z" in/out fields.
ISPP242
Panel 'aaaaaaaa' error - The .ZVARS value contains invalid variable name (1-8 alphanumeric chars)
ISPP243
Panel 'aaaaaaaa' error - A "Z" variable replacement name within .ZVARS is a duplicate field name.
ISPP244
Panel 'aaaaaaaa' error - The constructed "bbbbbbbb" string exceeds 255 characters.
ISPP245
Panel 'aaaaaaaa' error - Invalid "bbbbbbbb" variable name (not a literal or dialog variable).
ISPP246
Panel 'aaaaaaaa' error - Unexpected ")" delimiter found in bbbbbbbb. statement.
ISPP247
Panel 'aaaaaaaa' error - "bbbbbbbb" pool TYPE or copy destination is not a literal value.
ISPP248
Panel 'aaaaaaaa' error - .ZVARS name list begins with "(" but does not end with ")".
ISPP249
Panel 'aaaaaaaa' error - Invalid VEDIT variable name
ISPP250
Panel 'aaaaaaaa' error - Invalid ROWS keyword value (not a literal or dialog variable).
ISPP251
Panel 'aaaaaaaa' error - Invalid ROWS keyword value given on model line (not SCAN or ALL)
ISPP252
Panel 'aaaaaaaa' error - Invalid ROWS keyword value (dialog var) found while initializing panel.
ISPP253
Panel 'aaaaaaaa' error - SKIP(ON) or ATTN(ON) attributes are not valid for input fields.
ISPP254
Panel 'aaaaaaaa' error - ATTN(ON) attribute is valid for only protected text fields.
ISPP255
Panel 'aaaaaaaa' error - A blank or null designator character must immediately follow light pen attribute.
ISPP256
Panel 'aaaaaaaa' error - NUMERIC(ON) attribute is valid only for unprotected fields.
ISPP257
Panel 'aaaaaaaa' error - Cannot specify both SKIP(ON) and NUMERIC(ON) attributes.
ISPP258
Panel 'aaaaaaaa' error - The attribute keyword, CKBOX, is valid on these type of input fields: INPUT, DATAIN, CEF, LEF, NEF, and EE. It is also valid on output field type, SC.
ISPP259
Panel 'aaaaaaaa' error - The attribute keyword, PAS, is valid only for input or output field types.
ISPP260
Panel 'aaaaaaaa' error - Invalid alternate field keyword value (not a literal or dialog variable).
ISPP261
Panel 'aaaaaaaa' error - Invalid alternate command field name given (must be a panel field name).
ISPP262
Panel 'aaaaaaaa' error - Invalid alternate short message field name given (must be a panel field).
ISPP263
Panel 'aaaaaaaa' error - Invalid alternate long message field name given (must be a panel field).
ISPP264
Panel 'aaaaaaaa' error - Alternate command or message field name given is invalid (no panel fields).
ISPP265
Panel 'aaaaaaaa' error - There must be exactly two EXPAND characters, enclosed in parentheses.
ISPP266
Panel 'aaaaaaaa' error - The alternate command field name given is not an input field.
ISPP267
Panel 'aaaaaaaa' error - The alternate short or long message field name given is not an output field.
ISPP268
Enter required field - Enter data or make a selection for the required field which has the focus.
ISPP270
Panel 'aaaaaaaa' error - Invalid double digit hex character given for attribute character or keyword code.
ISPP271
Panel 'aaaaaaaa' error - The area-related keyword value must be explicitly stated (not a dialog variable)
ISPP272
Panel 'aaaaaaaa' error - .ALARM value was not YES or NO or blank.
ISPP273
Panel 'aaaaaaaa' error - Multiple graphic areas have been defined on the panel, only 1 allowed.
ISPP274
Panel 'aaaaaaaa' error - Overlapping AREAS have been defined on the panel.
ISPP275
Panel 'aaaaaaaa' error - Multiple extend/scroll areas defined on the panel, only 1 allowed.
ISPP276
Panel 'aaaaaaaa' error - SCROLL keyword is valid for only dynamic areas.
ISPP277
Panel 'aaaaaaaa' error - First line of an area must identify the left and right boundaries.
ISPP278
Panel 'aaaaaaaa' error - A panel field overlaps the boundary of a dynamic or scrollable area.
ISPP279
Panel 'aaaaaaaa' error - Area cannot be extended, other fields/areas would be extended also.
ISPP280
Panel 'aaaaaaaa' error - AREA attribute keyword given for something other than AREA definition.
ISPP281
Panel 'aaaaaaaa' error - Invalid attribute keyword given as part of an AREA definition.
ISPP282
Panel 'aaaaaaaa' error - A panel field overlaps the boundary of a dynamic or scrollable area.
ISPP283
Panel 'aaaaaaaa' error - .CSRPOS or .CSRROW value was not a valid numeric value.
ISPP284
Panel 'aaaaaaaa' error - Invalid .CSRPOS or .CSRROW value found while processing panel.
ISPP285
Panel 'aaaaaaaa' error - Invalid LVLINE keyword value type (not a literal or dialog variable).
ISPP286
Panel 'aaaaaaaa' error - The area referenced by the LVLINE function is not a dynamic or graphic area on the panel.
ISPP287
Panel 'aaaaaaaa' error - Invalid LVLINE area name found while processing panel.
ISPP288
Panel 'aaaaaaaa' error - Invalid WIDTH keyword value type (not a literal or dialog variable).
ISPP289
Panel 'aaaaaaaa' error - Invalid WIDTH value, (must be numeric chars, >= 80, <= screen width).
ISPP290
Panel 'aaaaaaaa' error - The EXPAND designation is improperly used within the panel record.
ISPP291
Panel 'aaaaaaaa' error - EXPAND keyword value may not be blank, "&", or an attribute character.
ISPP292
Panel 'aaaaaaaa' error - Invalid field/area name specified on REFRESH statement. It must be less than or equal to 8 characters.
ISPP293
Panel 'aaaaaaaa' error - REFRESH is specified for a field or area that is not on the panel.
ISPP294
Panel 'aaaaaaaa' error - The .ATTR or .ATTRCHAR argument must be enclosed in parentheses.
ISPP295
Panel 'aaaaaaaa' error - .ATTR argument must be a literal, a dialog variable, or .CURSOR.
ISPP296
Panel 'aaaaaaaa' error - .ATTR is specified for a field that is not on the panel.
ISPP297
Panel 'aaaaaaaa' error - .ATTR or .ATTRCHAR may appear only on left side of assignment stmt.
ISPP298
Panel 'aaaaaaaa' error - .ATTRCHAR argument must be a literal or a dialog variable.
ISPP299
Panel 'aaaaaaaa' error - .ATTRCHAR is specified for an invalid attribute character.
ISPP300
Panel 'aaaaaaaa' error - ATTR override keyword value not given, or not enclosed in parentheses.
ISPP301
Panel 'aaaaaaaa' error - A value is not specified for one of the attribute override keywords.
ISPP302
Panel 'aaaaaaaa' error - Invalid attribute keyword or value is specified for attribute override.
ISPP303
Panel 'aaaaaaaa' error - Attribute override may not be specified for area delimiter keywords.
ISPP304
Panel 'aaaaaaaa' error - Duplicate keywords were specified on an ATTRIBUTE override statement.
ISPP305
Panel 'aaaaaaaa' error - Invalid attribute TYPE change attempted in an ATTR override statement.
ISPP306
Panel 'aaaaaaaa' error - .ATTRCHAR defines a new character that is not DATAIN or DATAOUT.
ISPP307
Panel 'aaaaaaaa' error - Invalid override of cmd field or scroll amt field to TYPE(OUTPUT)
ISPP308
Panel 'aaaaaaaa' error - Invalid PAD character specified in .ATTR or .ATTRCHAR statement.
ISPP309
Panel 'aaaaaaaa' error - .AUTOSEL value was not YES or NO or blank.
ISPP310
Panel 'aaaaaaaa' error - Maximum allowable number of attributes exceeded by attribute override.
ISPP311
Panel 'aaaaaaaa' error - String of attribute override keywords exceeds maximum size of 255 characters.
ISPP312
Panel 'aaaaaaaa' error - "Scrollable" or "extendable" area not allowed in a table display panel.
ISPP313
Panel 'aaaaaaaa' error - An AREA definition is not permitted within the ")MODEL" section.
ISPP314
Panel 'aaaaaaaa' error - Invalid to specify both PAD and PADC attributes for one field.
ISPP315
Invalid MODEL definition - A variable model line may not be defined as a variable itself.
ISPP316
Model line not defined - The variable model line has not been initialized before the display.
ISPP317
Invalid model definition - The variable model is the only information allowed coded on the line.
ISPP318
Invalid model definition - The variable model line width is greater than the panel width.
ISPP319
Panel "aaaaaaaa" error - The command field may not be located within the )MODEL section.
ISPP320
Panel 'aaaaaaaa' error - Panel control variable bbbbbbbb;PFKEY cannot be set by a dialog.
ISPP321
Panel 'aaaaaaaa' error - The INIT, REINIT, AREA, or PROC section is too long.
ISPP322
Panel 'aaaaaaaa' error - A panel must have at least one line in the )BODY section.
ISPP323
Panel 'aaaaaaaa' error - More than 126 pairs have been specified for the TRANS function.
ISPP324
Panel 'aaaaaaaa' error - A panel cannot be preprocessed when WIDTH is specified as dialog variable.
ISPP325
Panel 'aaaaaaaa' error - A panel cannot be preprocessed with areas defined as extendable.
ISPP326
Panel 'aaaaaaaa' error - A panel cannot be preprocessed when model lines are specified as variables.
ISPP327
Panel 'aaaaaaaa' error - Variable name or name-list not coded for 'bbbbbbbb' statement.
ISPP328
Panel 'aaaaaaaa' error - Required keylist 'bbbbbbbb' in applid 'cccccccc' was not found.
ISPP329
Panel 'aaaaaaaa' error - LVLINE function can only be used in an )INIT, )REINIT or )PROC panel section.
ISPP330
BDISPMAX exceeded - aaaaaaaa displays exceeded in batch mode on panel bbbbbbbb.
ISPP331
BREDIMAX exceeded - aaaaaaaa bbbbbbbb;msg redisplays exceeded in batch mode.
ISPP332
Panel aaaaaaaa message - In batch, this message was displayed on the panel.
ISPP334
Panel 'aaaaaaaa' error - Unable to locate REXX routine bbbbbbbb required for panel REXX processing.
ISPP335
Rexx-defined failure - Panel Rexx routine-defined failure.
ISPP336
Panel 'aaaaaaaa' error - Severe error encountered during panel Rexx routine.
ISPP337
REXX failure - Severe error encountered processing a panel REXX routine.
ISPP338
Panel 'aaaaaaaa' error - Invalid dialog variable name encountered on *REXX panel statement.
ISPP340
Panel 'aaaaaaaa' error - Panel exit address must be dialog variable.
ISPP341
Panel 'aaaaaaaa' error - Panel exit message ID must be literal or dialog variable.
ISPP342
Panel 'aaaaaaaa' error - Panel exit type must be a literal.
ISPP343
Panel 'aaaaaaaa' error - Valid panel exit type is PGM or LOAD.
ISPP344
Panel 'aaaaaaaa' error - Invalid dialog variable name length on panel exit statement.
ISPP345
Exit-defined failure - Panel exit routine exit-defined failure.
ISPP346
Panel 'aaaaaaaa' error - Severe error encountered during panel exit routine.
ISPP347
Panel 'aaaaaaaa' error - Dialog variable value length changed by panel exit.
ISPP348
Panel 'aaaaaaaa' error - Exit data or message field defined incorrectly for panel exit.
ISPP349
Panel 'aaaaaaaa' error - Invalid panel exit address or panel exit name specified.
ISPP350
Panel 'aaaaaaaa' error - Invalid WIDTH keyword value type (not a literal or dialog var).
ISPP351
Panel 'aaaaaaaa' error - Invalid window width value (must be numeric, >= 8, less than screen width).
ISPP352
Panel 'aaaaaaaa' error - Invalid window depth value (must be numeric, > 0, less than screen depth).
ISPP353
Panel 'aaaaaaaa' error - Panel record longer than specified (or defaulted) window width.
ISPP354
Panel 'aaaaaaaa' error - Number of body records > specified (or defaulted) window depth.
ISPP355
Panel 'aaaaaaaa' error - Panel field exceeds the specified (or defaulted) window width.
ISPP356
Panel 'aaaaaaaa' error - Panel in window cannot exceed the current physical screen width.
ISPP357
Panel 'aaaaaaaa' error - Number of pull-down choices is greater than screen depth - 2.
ISPP358
Panel 'aaaaaaaa' error - Panel exit name to load must be literal or dialog variable.
ISPP359
Panel 'aaaaaaaa' error - Load of panel exit routine failed.
ISPP360
Panel 'aaaaaaaa' error - VER statement syntax error on LISTV keyword parameter. Specification of the varlist subparameter is invalid or missing.
ISPP361
Panel 'aaaaaaaa' error - Specification error found for VER statement LISTV keyword parameter. The dialog variable specified in the varlist subparameter is undefined or cannot be accessed.
ISPP362
Panel 'aaaaaaaa' error - Specification error found for VER statement LISTV keyword parameter. The dialog variable specified in the varlist subparameter contains invalid data.
ISPP363
Panel 'aaaaaaaa' error - Specification error found for VER statement LISTV keyword parameter. The dialog variable specified in the varlist subparameter contains more than 100 values.
ISPP364
Panel 'aaaaaaaa' error - VER statement syntax error on INCLUDE keyword parameter. Specification of the IMBLK and VALUEN subparameters are out of order.
ISPP365
Panel 'aaaaaaaa' error - VER statement syntax error on INCLUDE keyword parameter. Subparameter 'value1' must be specified.
ISPP366
Panel 'aaaaaaaa' error - VER statement syntax error on INCLUDE keyword parameter. An invalid value has been specified for 'value1' and/or 'value2'.
ISPP367
Panel 'aaaaaaaa' error - VER statement syntax error on INCLUDE keyword parameter. More than two values have been specified.
ISPP368
Panel 'aaaaaaaa' error - ALPHAB keyword invalid on VER statement. No pointer to translate table.
ISPP370
Must be alphabetic - Enter alphabetic characters only (A-Z or a-z).
ISPP371
Invalid chars entered - Enter numeric and/or alphabetic characters (0-9, A-Z, a-z, #, $, or @).
ISPP372
Invalid chars entered - Enter numeric and/or alphabetic characters only (0-9, A-Z, or a-z).
ISPP373
Must be alphabetic - Enter alphabetic characters (A-Z, a-z, #, $, or @). The value entered may also contain blank characters.
ISPP374
Must be alphabetic - Enter alphabetic characters only (A-Z or a-z). The value entered may also contain blank characters.
ISPP375
Must be numeric - Enter numeric characters (0-9). The value entered may also contain blank characters.
ISPP376
Invalid chars entered - Enter numeric and/or alphabetic characters (0-9, A-Z, a-z, #, $, or @). The value entered may also contain blank characters.
ISPP377
Invalid chars entered - Enter numeric and/or alphabetic characters only (0-9, A-Z, or a-z). The value entered may also contain blank characters.
ISPP378
Unavailable choice - An unavailable choice (one of 'aaaaaaaa') was selected. Enter one of the available values.
ISPP380
Panel 'aaaaaaaa' error - COLOR, INTENS, or HILITE keywords cannot be specified on CUA panel element attributes.
ISPP381
Panel 'aaaaaaaa' error - The CAPS keyword value cannot be overridden on the CUA panel element attributes AB or RP.
ISPP382
Panel 'aaaaaaaa' error - TYPE(EE) valid for overrides on input fields only.
ISPP383
Panel 'aaaaaaaa' error - Invalid label on GOTO statement.
ISPP384
Panel 'aaaaaaaa' error - GOTO label 'bbbbbbbb' not found.
ISPP385
Panel 'aaaaaaaa' error - TYPE(RP) attribute valid only on a panel displayed by ISPF help.
ISPP386
Panel 'aaaaaaaa' error - TYPE(RP) attribute usage requires )HELP section definition.
ISPP387
Panel 'aaaaaaaa' error - The RADIO keyword is only valid on CEF or SACR fields.
ISPP388
Panel 'aaaaaaaa' error - The 'bbbbbbbb' keyword only allows numbers in the range 1-99.
ISPP390
Panel 'aaaaaaaa' error - Invalid )PANEL statement syntax. Keyword found not the KEYLIST keyword.
ISPP391
Panel 'aaaaaaaa' error - Illegal )PANEL statement keylist-name parameter (must be a literal).
ISPP392
Panel 'aaaaaaaa' error - Invalid )PANEL statement syntax. The keylist-name parameter is missing.
ISPP393
Panel 'aaaaaaaa' error - A keylist-name value must be 1-8 characters. The first character must be A-Z or a-z, and any remaining characters can be A-Z, a-z, or 0-9.
ISPP394
Panel 'aaaaaaaa' error - Invalid )PANEL statement syntax. Missing expected right parenthesis.
ISPP395
Panel 'aaaaaaaa' error - Illegal )PANEL statement keylist-applid parameter (must be a literal).
ISPP396
Panel 'aaaaaaaa' error - A keylist-applid value must be 1-4 characters. The first character must be A-Z or a-z, and any remaining characters can be A-Z, a-z, or 0-9.
ISPP397
Panel 'aaaaaaaa' error - Invalid )PANEL statement syntax. Valid keywords are KEYLIST and IMAGE.
ISPP398
Panel 'aaaaaaaa' error - A )PANEL section statement error has occurred. The IMAGE(image-name) keyword value is greater than 8 characters. The image-name must be less than or equal to 8 characters and follow TSO data set member naming conventions.
ISPP399
Panel 'aaaaaaaa' error - Invalid row or column value for )PANEL IMAGE(image-name,row,col) keyword. The row and column values can be dialog variables, or numeric(0-9).
ISPP400
Panel 'aaaaaaaa' error - Invalid or missing keyword on )ABC section heading.
ISPP401
Panel 'aaaaaaaa' error - )ABCINIT section heading statement has an invalid format.
ISPP402
Panel 'aaaaaaaa' error - )ABCPROC section heading statement has an invalid format.
ISPP403
Panel 'aaaaaaaa' error - Invalid statement or keyword found within )ABC section.
ISPP404
Panel 'aaaaaaaa' error - Invalid statement or keyword found within )ABCINIT section.
ISPP405
Panel 'aaaaaaaa' error - Invalid statement or keyword found within )ABCPROC section.
ISPP406
Panel 'aaaaaaaa' error - Invalid value found for DESC keyword in section )ABC heading.
ISPP407
Panel 'aaaaaaaa' error - Action bar field text in )BODY section not found in matching )ABC descriptive text keyword.
ISPP408
Panel 'aaaaaaaa' error - Action bar text field requires leading blank in )BODY section.
ISPP409
Panel 'aaaaaaaa' error - )ABC text description keyword value does not match description value on )ABC heading.
ISPP410
Panel 'aaaaaaaa' error - An )ABC section must contain at least one statement.
ISPP411
Panel 'aaaaaaaa' error - An )ABCINIT section must contain at least one statement.
ISPP412
Panel 'aaaaaaaa' error - An )ABCPROC section must contain at least one statement.
ISPP413
Panel 'aaaaaaaa' error - Invalid value for PDC name keyword found within )ABC section.
ISPP414
Panel 'aaaaaaaa' error - Invalid value for PDC descriptive text keyword found within )ABC section.
ISPP415
Panel 'aaaaaaaa' error - Invalid RUN() value found on ACTION statement.
ISPP416
Panel 'aaaaaaaa' error - Invalid PARM() value found on ACTION statement.
ISPP417
Panel 'aaaaaaaa' error - Maximum number of )ABC sections exceeded.
ISPP418
Panel 'aaaaaaaa' error - The action bar pull-down area is too long.
ISPP419
Panel 'aaaaaaaa' error - Multiple ACTION statements found after a PDC statement.
ISPP420
Panel 'aaaaaaaa' error - Invalid 'ACC' keyword value - text must be less than bbbbbbbb characters, and contain only 3 keys. If there are blanks between the key values and the plus sign (+), then the ACC value text string must be enclosed in single quotes.
ISPP421
Cursor not on choice - The cursor was not positioned on an action bar choice.
ISPP422
Select a choice - Select a choice by entering a value or positioning the cursor on the choice.
ISPP423
Conflicting selection - Choice number entered and cursor positioned on different choice.
ISPP424
Invalid value - Enter one of the listed choices.
ISPP425
Choice value error - The pull-down choice value length is not between 1 and 8 characters.
ISPP426
Choice value error - The pull-down choice value must be numeric.
ISPP427
Choice value error - The pull-down choice value must equal an available choice number.
ISPP428
Panel 'aaaaaaaa' error - Invalid UNAVAIL variable name found on PDC statement.
ISPP429
Panel 'aaaaaaaa' error - Invalid 'MNEM' keyword value - must be between 1 and bbbbbbbb..
ISPP430
Panel 'aaaaaaaa' error - Invalid or missing parameter on TOG statement.
ISPP431
Panel 'aaaaaaaa' error - Too many tokens given on TOG statement.
ISPP432
Panel 'aaaaaaaa' error - No dialog variable specified on TOG statement.
ISPP433
Panel 'aaaaaaaa' error - No mode specified on TOG statement.
ISPP434
Panel 'aaaaaaaa' error - No field specified on TOG statement.
ISPP435
Panel 'aaaaaaaa' error - Field specified on TOG statement is not a valid field.
ISPP436
Panel 'aaaaaaaa' error - Mode must be S or M.
ISPP437
Panel 'aaaaaaaa' error - Multiple choice TOG valid only in )PROC section.
ISPP438
Panel 'aaaaaaaa' error - TOG statement valid only in )PROC or )ABCPROC section.
ISPP439
Panel 'aaaaaaaa' error - Invalid value found on the PDSEP keyword. Valid values are ON and OFF.
ISPP440
Panel 'aaaaaaaa' error - Invalid FIELD() value in )HELP section.
ISPP441
Panel 'aaaaaaaa' error - Invalid PANEL() value in )HELP section.
ISPP442
Panel 'aaaaaaaa' error - Exceeded maximum number of entries in )HELP section.
ISPP443
Missing field - Field level help requested for missing field.
ISPP444
Panel 'aaaaaaaa' error - Duplicate field name found in )HELP section.
ISPP445
Panel 'aaaaaaaa' error - Missing FIELD() keyword in )HELP section.
ISPP446
Panel 'aaaaaaaa' error - Missing PANEL() keyword in )HELP section.
ISPP447
Panel 'aaaaaaaa' error - Invalid keyword found in )HELP section.
ISPP448
Panel 'aaaaaaaa' error - Invalid EXITADDR() value in )HELP section.
ISPP449
Panel 'aaaaaaaa' error - Invalid EXITDATA() value in )HELP section.
ISPP450
Panel 'aaaaaaaa' error - )ABCINIT section of panel not found when expected.
ISPP451
Panel 'aaaaaaaa' error - )ABCPROC section of panel not found when expected.
ISPP452
Panel 'aaaaaaaa' error - Missing descriptive text keyword on PDC statement.
ISPP453
Panel 'aaaaaaaa' error - Missing RUN() keyword on ACTION statement.
ISPP454
Panel 'aaaaaaaa' error - Duplicate action bar field text found in )BODY section.
ISPP455
Panel 'aaaaaaaa' error - Invalid accelerator key, bbbbbbbb, found in the ACC value. Valid values are Ctrl, Shift, Alt, Backspace, Insert, Delete, F1-F12, A-Z, a-z, and 0-9.
ISPP456
Panel 'aaaaaaaa' error - Invalid single accelerator key, bbbbbbbb, found in the ACC value. This key must be used in combination with some other valid key(s).
ISPP457
Panel 'aaaaaaaa' error - Invalid key combination found in the ACC value. A single character cannot be used in combination with the "SHIFT" key.
ISPP458
Panel 'aaaaaaaa' error - Invalid key combination found in the ACC value. If two keys are specified, one key must be Ctrl, Alt, or Shift, and the other must be Insert, Delete, Backspace, F1-F12, A-Z, a-z, or 0-9. If three keys are specified, two keys must be Ctrl, Alt, or Shift, and the other must be Insert, Delete, Backspace, F1-F12, A-Z, a-z, or 0-9. No two keys within the ACC text string can contain the same value.
ISPP459
Panel 'aaaaaaaa' error - Invalid key combination found in the ACC value. A single number '0-9' cannot be used in any combination with the "SHIFT" key.
ISPP460
Panel 'aaaaaaaa' error - Two consecutive field names without panel name in )HELP section.
ISPP461
Panel 'aaaaaaaa' error - Two consecutive panel names without field name in )HELP section.
ISPP462
Panel 'aaaaaaaa' error - Two consecutive MSG keywords without a FIELD keyword in the )HELP section.
ISPP463
Panel 'aaaaaaaa' error - Two consecutive PASSTHRU keywords without a field name in the )HELP section.
ISPP464
Panel 'aaaaaaaa' error - A group box attribute character cannot be overridden with the bbbbbbbb;ATTRCHAR statement.
ISPP465
Panel 'aaaaaaaa' error - An invalid keyword following the application id was found on the KEYLIST keyword of the )PANEL statement. The only valid keyword is SHARED.
ISPP466
Panel 'aaaaaaaa' error - A LISTBOX, DDLIST, or COMBO name is invalid. A LISTBOX, DDLIST, or COMBO name is composed of 1-8 characters. Alphanumeric characters A-Z, 0-9, #, $, OR @ can be used in the name, but the first character cannot be numeric.
ISPP467
Panel 'aaaaaaaa' error - The name value for the LISTBOX, DDLIST, or COMBO attribute section keyword is valid only on input type fields.
ISPP468
Panel 'aaaaaaaa' error - The WIDTH and DEPTH keywords only allow numbers in the range 0-99.
ISPP470
Panel 'aaaaaaaa' error - )CCSID value must be 5 numeric digits.
ISPP471
Panel 'aaaaaaaa' error - Illegal token in )CCSID section.
ISPP472
Panel 'aaaaaaaa' error - NUMBER keyword does not exist in the )CCSID section.
ISPP473
Variable not found - Variable specified for VEDIT not found on panel.
ISPP474
Panel 'aaaaaaaa' error - The name parameter is missing from the )LIST statement.
ISPP480
Panel 'aaaaaaaa' error - A ')PNTS' section statement contains two FIELD() keywords or the statement's VAR() or VAL() keyword is missing.
ISPP481
Panel 'aaaaaaaa' error - A ')PNTS' section statement contains two VAR() keywords or the statement's VAL() keyword is missing.
ISPP482
Panel 'aaaaaaaa' error - Invalid VAL(value) found in the ')PNTS' section statement.
ISPP483
Panel 'aaaaaaaa' error - Invalid FIELD() value found in the ')PNTS' section statement.
ISPP484
Panel 'aaaaaaaa' error - Duplicate FIELD(name) found in 'PNTS' section.
ISPP485
Panel 'aaaaaaaa' error - Invalid VAR() value in ')PNTS' section.
ISPP486
Panel 'aaaaaaaa' error - Invalid VAL() value in ')PNTS' section.
ISPP487
Panel 'aaaaaaaa' error - Invalid keyword found in ')PNTS' section.
ISPP488
Panel 'aaaaaaaa' error - No FIELD() field-name found in ')PNTS' section.
ISPP489
Panel 'aaaaaaaa' error - A ')PNTS' section statement contains two VAL() keywords.
ISPP490
Panel 'aaaaaaaa' error - No VAR() variable-name found in ')PNTS' section.
ISPP491
Panel 'aaaaaaaa' error - Keywords in ')PNTS' section missing or out of order.
ISPP492
Panel 'aaaaaaaa' error - Invalid VAL() value found on ')PNTS' section entry.
ISPP493
Panel 'aaaaaaaa' error - Keywords in ')LIST' section missing or out of order.
ISPP494
Panel 'aaaaaaaa' error - Invalid CHOICE() value found in the ')LIST' section statement.
ISPP495
Panel 'aaaaaaaa' error - The list-name specified on this )LIST section is a duplicate of another )LIST section's list-name. Each )LIST section must have a unique list-name.
ISPP496
Panel 'aaaaaaaa' error - A list-name specified on this )LIST section has no corresponding list-name defined in the )ATTR section.
ISPP497
Panel 'aaaaaaaa' error - The value in the )PNTS section parameter VAR(value) is a variable whose length exceeds the limitation of a leading ampersand plus 7 characters.
ISPP498
Panel 'aaaaaaaa' error - The value in the )PNTS section parameter VAL(value) is a variable whose length exceeds the limitation of a leading ampersand plus 7 characters.
ISPP500
Exit address error - The panel help exit address is zero.
ISPP501
Exit variable error - The panel help exit address variable is not defined.
ISPP502
Exit variable error - An error occurred retrieving the panel help exit address variable.
ISPP503
Exit variable error - The panel help exit data variable is not defined.
ISPP504
Exit variable error - An error occurred retrieving the panel help exit data variable.
ISPP505
Keys Help not available - Application has not set system variable ZKEYHELP.
ISPP506
Extended Help panel is not defined for the application panel.
ISPP507
Extended Help panel is currently displayed.
ISPP508
Keys Help panel is currently displayed.
ISPP509
RP help not defined - )HELP section definition for reference phrase aaaaaaaa missing.
ISPP510
Panel 'aaaaaaaa' error - The DEPTH keyword in a )PNTS section statement is missing or out-of-order.
ISPP511
Panel 'aaaaaaaa' error - The image-name specified with the IMAGE or IMAGEP keyword contains an invalid character, or is greater than 8 characters.
ISPP512
Panel 'aaaaaaaa' error - Invalid )PNTS statement syntax. The image-name parameter is missing or defined as blank for the IMAGEP keyword.
ISPP513
Panel 'aaaaaaaa' error - Invalid panel statement syntax. The image-name is not defined for the IMAGE keyword on a )PANEL statement or on a )PNTS statement.
ISPP514
Panel 'aaaaaaaa' error - Invalid )PNTS statement syntax. The depth-value is incorrect on the DEPTH keyword. Valid values are 0 - 62 or a dialog variable containing one of these values.
ISPP515
The image from the host is being downloaded to the default path, where ISPF's client/server resides. To set an image path from ISPF's Settings panel, select the Workstation action bar choice, select the option "GUI panel settings", and set an image path.
ISPP516
Panel 'aaaaaaaa' error - Invalid )PNTS statement syntax. The place-value is incorrect on the PLACE keyword. Valid values are: A (above) B (below), L (left), R (right) or a dialog variable containing one of these values.
ISPP517
ISPILIB, the image data set, is not allocated. ISPILIB must be preallocated in order for ISPF to download images to your workstation. Images will not display on your panel unless they already exist on your workstation.
ISPP517A
The host member aaaaaaaa could not be found in any of the concatenated ISPILIB data sets.
ISPP517B
An I/O error occurred while attempting to find a member of an image data set (ddname ISPILIB).
ISPP517C
An attempt to download images from the host failed. ISPF has disabled "Download Images". To reactivate, select the option "GUI panel settings" from the "Workstation" action bar choice on the Settings panel. Enable the "Download Images" checkbox and verify your "Path for images" is correctly specified and is available on the workstation. See the messages documentation for other possible errors.
ISPP517D
Enter image path field - When "Make Path for Images" has been selected, you must enter a workstation path in the "Path for Images" field. If you do not want an image path made, do not check "Make path for Images".
ISPP518
Panel 'aaaaaaaa' error - No text found following the TEXT keyword.
ISPP519
Panel 'aaaaaaaa' error - A ')PNTS' section statement contains a point-and-shoot text field with only the DEPTH keyword specified. If the DEPTH keyword is coded, the TEXT keyword must also be coded.
ISPP520
PICTCN syntax error - VER statement syntax error on PICTCN keyword parameter. The field-mask parameter does not contain the mask-character specified.
ISPP521
DSN syntax error - Verification failure using keyword DSNAMEF. Consecutive asterisks (*) are not allowed.
ISPP522
Name syntax error - Verification failure using keyword NAMEF. Consecutive asterisks (*) are not allowed.
ISPP523
Panel 'aaaaaaaa' error - Invalid value for a verify PICTCN string found while processing panel.
ISPP524
Panel 'aaaaaaaa' error - Invalid value for a verify PICTCN string found while processing panel.
ISPP525
PICTCN mask-char error - VER statement syntax error on PICTCN mask-char parameter. The mask-character parameter cannot be one of the picture string characters (C,A,N,9,X, or c,a,n,x)
ISPP526
VERify JSTD error - VER statement failed for Julian standard date (JSTD) when verifying the year. The value for the year must be numeric. The date is expressed in a 4-digit year (YYYY) and a 3-digit day (DDD). The format is YYYY.DDD. Valid values for YYYY are 0000-9999. Valid values of DDD are 001-365 or 001-366 if the year is a leap year.
ISPP527
VERify JSTD error - VER statement failed for Julian standard date (JSTD) when verifying the day. The value for the day must be numeric. The date is expressed in a 4-digit year (YYYY) and a 3-digit day (DDD). The format is YYYY.DDD. Valid values for YYYY are 0000-9999. Valid values of DDD are 001-365 or 001-366 if the year is a leap year.
ISPP528
VERify JSTD error - VER statement failed for Julian standard date (JSTD) when verifying the day. The day was outside of the range 001-365 or 001-366 for leap years.
ISPP529
VERify error - VER statement failed for the national language date delimiter character.
ISPP529A
VERify error - VER statement failed for Julian date or Julian standard date delimiter. A period should be used as the delimiter. For example: YY.DDD is the Julian date format and YYYY.DDD is the Julian standard date format.
ISPP530
Verify IDATE error - VER statement failed for IDATE. The year, day, or month is not numeric. The date must be expressed as a 2-digit year (YY), 2-digit month (MM) and 2-digit day (DD). The year, month and day 2-digit values are separated by the national language date delimiter character. Valid year values are 00-99, valid month values are 01-12, and valid day values are 01-31.
ISPP531
Verify IDATE error - VER statement failed for IDATE. The 2-digit month is not within the range 01-12. The date must be expressed in a 2-digit year (YY), 2-digit month (MM) and 2-digit day (DD). The year, month and day 2-digit values are separated by a delimiting character.
ISPP532
Verify IDATE error - VER statement failed for IDATE. The 2-digit year is not within the range 00-99. The date must be expressed in a 2-digit year (YY), 2-digit month (MM) and 2-digit day (DD). The year, month and day 2-digit values are separated by a delimiting character.
ISPP533
Verify IDATE error - VER statement failed for IDATE. The 2-digit day entered is not within the 01-31 range for the months of January, March, May, July, August, October or December, or the 2-digit day entered is not within the 01-30 range for the months of April, June, September or November.
ISPP533A
Verify IDATE error - VER statement failed for IDATE. The 2-digit day specified exceeds the days in the month of February. February has a range of 01-29 in leap years and a range of 01-28 in non-leap years.
ISPP534
Verify JDATE error - VER statement failed for Julian date (JDATE) day. The day was outside of the range 001-365 or 001-366 for leap years.
ISPP535
Verify STDDATE error - VER statement failed for standard date (STDDATE). The 4-digit year (YYYY) or 2-digit month (MM) or 2-digit day (DD) was not numeric. Valid year values are 0000-9999, valid month values are 01-12, and valid day values are 01-31.
ISPP536
Verify IPADDR4 error - VER statement failed for IPADDR4. Two consecutive dot delimiters were found in the IP version 4 address. The format for a valid IP version 4 address in dotted decimal notation is: nnn.nnn.nnn.nnn. For example, 6.9.97.2 or 9.37.198.44 are in valid IP version 4 address notation.
ISPP537
Verify IPADDR4 error - VER statement failed for IPADDR4. One of the 4 bytes (octets) that make up the IP version 4 address is greater than 3 decimal digits. The format is: nnn.nnn.nnn.nnn
ISPP538
Verify IPADDR4 error - VER statement failed for IPADDR4. The IP version 4 address is not in the correct dotted decimal notation. Either 1) Too few or too many dot delimiters were found or 2) The address started or ended with a dot delimiter. The correct format is: nnn.nnn.nnn.nnn
ISPP539
Verify IPADDR4 error - VER statement failed for IPADDR4. The first byte (octet) of the IP version 4 address is not in the range of 0-223 decimal.
ISPP539A
Verify IPADDR4 error - VER statement failed for IPADDR4. The second, third or fourth byte (octet) of the IP version 4 address is not in the range of 0-255 decimal.
ISPP539B
Verify IPADDR4 error - VER statement failed for IPADDR4. The IP version 4 address contains an invalid digit or delimiter. Valid digits can range from 0-9, and a dot (.) is the only valid delimiter. The format is: nnn.nnn.nnn.nnn
ISPP540
Verify STDDATE error - VER statement failed for STDDATE. The 2-digit month was not within the range of 01-12.
ISPP541
Verify STDDATE error - VER statement failed for STDDATE. The 2-digit day entered is not within the 01-31 range for the months of January, March, May, July, August, October or December OR the 2-digit day entered is not within the 01-30 range for the months of April, June, September or November.
ISPP542
Verify STDDATE error - VER statement failed for STDDATE. The 2-digit day specified exceeds the days in the month of February. February has a range of 01-29 in leap years and a range of 01-28 in non-leap years.
ISPP543
Verify JDATE error - VER statement failed for JDATE. The year was not expressed as a 2-digit year. The date must be expressed as 2-digit year in the range of 00-99 and 3-digit day of the year in the range of 001-365 or 001-366 for a leap year. The format is YY.DDD with a period as the delimiter.
ISPP544
Verify JDATE error - VER statement failed for JDATE. The day of the year was not expressed as a 3-digit day of the year (DDD). The date must be expressed as 2-digit year in the range of 00-99 and 3-digit day of the year in the range of 001-365 or 001-366 for a leap year. The format is YY.DDD with a period as the delimiter.
ISPP545
Verify ITIME error - VER statement failed for International time (ITIME). The national language time delimiter is invalid or position 3 does not contain the national language time delimiter.
ISPP546
Verify ITIME error - VER statement failed for International time (ITIME). The hour or minute value is not numeric. Valid values are 00-23 for hour and 00-59 for minute.
ISPP547
Verify ITIME error - VER statement failed for international time (ITIME). The hour or minute entered is outside of the valid range. The value range for hour is 00-23 and for minute is 00-59.
ISPP548
Verify STDTIME error - VER statement failed for standard time (STDTIME). The national language time delimiter is invalid or position 3 and 6 do not contain the national language time delimiter.
ISPP549
Verify STDTIME error - VER statement failed for standard time (STDTIME). The hour, minute, or second value is not numeric. Valid values are 00-23 for hour, 00-59 for minute, and 00-59 for second. For the U.S., the format is HH:MM:SS.
ISPP549A
Verify STDTIME error - VER statement failed for standard time (STDTIME). The hour, minute, or second value is not within the valid range. Valid ranges are 00-23 for hour and 00-59 for minute and second. For the U.S., the format is HH:MM:SS.
ISPP550
Panel 'aaaaaaaa' error - An invalid keyword was found in the ')FIELD' section.
ISPP551
Panel 'aaaaaaaa' error - Invalid FIELD() value found in the ')FIELD' statement.
ISPP552
Panel 'aaaaaaaa' error - Invalid LEN() value found in the ')FIELD' statement.
ISPP553
Panel 'aaaaaaaa' error - Invalid RCOL() value found in the ')FIELD' statement.
ISPP554
Panel 'aaaaaaaa' error - Invalid LCOL() value found in the ')FIELD' statement.
ISPP555
Panel 'aaaaaaaa' error - Invalid IND() value found in the ')FIELD' statement.
ISPP556
Panel 'aaaaaaaa' error - Invalid keyword found in the ')FIELD' statement.
ISPP557
Panel 'aaaaaaaa' error - Invalid LIND() value found in the ')FIELD' statement.
ISPP558
Panel 'aaaaaaaa' error - Invalid RIND() value found in the ')FIELD' statement.
ISPP559
Panel 'aaaaaaaa' error - Invalid SCROLL() value found in the ')FIELD' statement.
ISPP560
Panel 'aaaaaaaa' error - Invalid field name specified on the LENGTH() built-in function
ISPP561
Panel 'aaaaaaaa' error - Invalid field name specified on the UPPER() built-in function
ISPP562
End of field - You have scrolled to the end of the current field.
ISPP563
Start of field - You are positioned at the start of the current field.
ISPP564
Input truncated - You have typed data beyond the end of the field or you have replaced DBCS characters with single byte character resulting in truncation of input.
ISPP564A
Input truncated - After converting input data from UTF-8 to EBCDIC the number of bytes to be stored in a field exceeded the length of the field. The input data has been truncated at the length of the field.
ISPP565
Invalid command - The command you have entered is not valid for the expand field function.
ISPP566
Invalid parameter - ON/OFF are the only valid parameters HEX command parameters.
ISPP567
Panel 'aaaaaaaa' error - Invalid SIND() value found in the ')FIELD' statement.
ISPP568
Panel 'aaaaaaaa' error - Invalid SCALE() value found in the ')FIELD' statement.
ISPP569
Panel 'aaaaaaaa' error - Invalid field name specified on the VSYM() built-in function
ISPP600
No window to move - There is no active pop-up window to move.
ISPP601
Cannot move window - Pop-up window cannot be moved while pull-down is displayed.
ISPP602
Invalid command - "WINDOW MOVE" is an invalid command in GUI mode.
ISPP603
Invalid command - "PRINT", "PRINT-HI", "PRINTL", "PRINTLHI", and "PRINTG" are invalid commands in GUI mode.
ISPP604
No connection - The "WS" command is only valid when a connection with the workstation has been established.
ISPP605
No Connection - The SELECT WSCMD and SELECT WSCMDV services are only valid when a connection with the workstation has been established.
ISPP606
Enter an application name at the cursor position. Any application name and parameters that are valid for the ISPF START command are valid in this field. If additional space is needed, press the Expand PF key and a pop-up window will be displayed containing a longer input field.
ISPP607
The Expand PF key is not active unless the cursor is in the Application Name input field.
ISPP608
No more screens - There are no more screens available. You have the maximum number of available screens.
ISPP609
Not enough storage - There is not enough storage to safely start another screen. The SPLIT command is nullified.
ISPP610
Panel 'aaaaaaaa' error - Width of line in the )AREA section is wider than allowed in the )BODY section definition.
ISPP611
Panel 'aaaaaaaa' error - A scrollable area cannot be defined within an )AREA section.
ISPP612
Panel 'aaaaaaaa' error - A graphic area cannot be defined within an )AREA section.
ISPP613
Panel 'aaaaaaaa' error - An action bar cannot be defined within an )AREA section.
ISPP614
Panel 'aaaaaaaa' error - An area defined with SCROLL(ON) or EXTEND(ON) cannot be defined within an )AREA section.
ISPP615
Panel 'aaaaaaaa' error - )AREA section defined out of order, It must appear after the )BODY section and before the )INIT, )REINIT, )PROC, or )HELP sections if coded.
ISPP616
Panel 'aaaaaaaa' error - Invalid keyword for the )AREA section.
ISPP617
Panel 'aaaaaaaa' error - )AREA section is not defined for an area section defined in the )BODY or an empty )AREA section was defined.
ISPP618
Panel 'aaaaaaaa' error - An )AREA section is defined without a section defined in the panel )BODY section.
ISPP619
Panel 'aaaaaaaa' error - Invalid keyword for AREA of type SCRL.
ISPP620
Panel 'aaaaaaaa' error - )MODEL cannot be defined in an )AREA that has other information already defined.
ISPP621
Panel 'aaaaaaaa' error - Area name must be 1 to 8 characters in length.
ISPP622
Panel 'aaaaaaaa' error - Scrollable area name must be specified correctly
ISPP623
Panel 'aaaaaaaa' error - The depth must be specified as a number
ISPP624
Panel 'aaaaaaaa' error - )MODEL not allowed in )AREA section
ISPP625
Panel 'aaaaaaaa' error - Scrollable area must be defined at least 20 wide in the )BODY section definition.
ISPP626
Panel 'aaaaaaaa' error - Depth defined on the area section must be less than or equal to the number of lines defined in the )AREA section.
ISPP627
Panel 'aaaaaaaa' error - Depth defined on the area section must be equal to or greater than the number of lines defined for the scrollable area in the )BODY section.
ISPP628
Panel 'aaaaaaaa' error - Variable cannot be used for depth specification.
ISPP629
Panel 'aaaaaaaa' error - EXTEND(OFF) scrollable area must be a depth of at least 2 lines in the )BODY section definition.
ISPP650
Panel 'aaaaaaaa' error - Depth specified will not fit on the screen.
ISPP651
The cursor must be within a scrollable area to perform the requested scroll.
ISPP652
End of data - There is no additional information below this line.
ISPP653
Top of data - There is no additional information above this line.
ISPP654
The scrollable area must be visible to perform the requested scroll.
ISPP655
End of data - There is no additional information below this line. Press Enter or RIGHT again to display the next panel, if one has been defined.
ISPP656
Top of data - There is no additional information above this line. Press LEFT again to display the previous panel, if one has been defined.
ISPP657
Panel 'aaaaaaaa' error - A graphic area cannot be defined within a group box.
ISPP658
Invalid screen name - A screen name must be more than one character, and all alphanumerics, and cannot be LIST, PREV or NEXT.
ISPP659
Any application name and parameters that are valid for the ISPF START command are valid in this field. If additional space is needed, press the Expand PF key while the cursor is in this field and a pop-up window will be displayed containing a longer input field.
ISPP700
Panel 'aaaaaaaa' error - The exit name on the )INEXIT statement is invalid. An exit name is composed of 1-8 characters. Alphanumeric characters A-Z, 0-9, #, $, OR @ can be used in the name, but the first character cannot be numeric.
ISPP701
Panel 'aaaaaaaa' error - Illegal token in )INEXIT section.
ISPP702
Panel 'aaaaaaaa' error - Panel input exit type is invalid - must be PGM or LOAD.
ISPP703
Panel 'aaaaaaaa' error - The exit name parameter is missing from the )INEXIT statement.
ISPP704
Panel 'aaaaaaaa' error - Load of panel input exit routine failed.
ISPP705
Panel 'aaaaaaaa' error - The exit address variable parameter is missing from the )INEXIT statement.
ISPP706
Panel 'aaaaaaaa' error - The name of the exit address variable specified on the )INEXIT statement is invalid.
ISPP707
Panel 'aaaaaaaa' error - The input exit address variable contains and invalid address value.
ISPP900
Panel 'aaaaaaaa' error - Invalid ADDSOSI value (not a dialog variable).
ISPP901
Panel 'aaaaaaaa' error - Invalid DELSOSI value (not a literal or dialog variable).
ISPP902
Panel 'aaaaaaaa' error - Invalid ONEBYTE value (not a dialog variable).
ISPP903
Panel 'aaaaaaaa' error - Invalid TWOBYTE value (not a dialog variable).
ISPP904
Panel 'aaaaaaaa' error - x'0E' or x'0F' is invalid as an attribute character.
ISPP910
Must be DBCS - Enter DBCS characters.
ISPP911
Must be mixed - Enter correct mixed form characters.
ISPP912
Must be EBCDIC - Enter EBCDIC characters.
ISPP913
ADDSOSI error - Invalid ADDSOSI value (dialog var) found while INIT/PROC panel.
ISPP914
DELSOSI error - Invalid DELSOSI value (dialog var) found while INIT/PROC panel.
ISPP915
TWOBYTE error - Invalid TWOBYTE value (dialog var) found while INIT/PROC panel.
ISPP916
ONEBYTE error - Invalid ONEBYTE value (dialog var) found while INIT/PROC panel.
ISPP917
Panel 'aaaaaaaa' error - Invalid attribute FORMAT change attempted in an attribute override statement.
ISPP918
Panel 'aaaaaaaa' error - Exceeds maximum number of attributes allowed (127).
ISPP920
Panel 'aaaaaaaa' error - The alternate command field name given is a DBCS format field.
ISPP921
Panel 'aaaaaaaa' error - The alternate short or long message field name given is DBCS format.
ISPP940
Trace complete - The Trace output has been written to SYSOUT allocated to the DDname ISPDPTRC.
ISPP941
Parameter Invalid - Parameter #aaaaaaaa is invalid. Valid parameters are: END, VIEW, LIST, QUIET, DISPLAY(), PANEL(), READ(), SCREEN(), SECTION(), SERVICE(), and DEBUG.
ISPP942
Invalid panel name - The panel name specified for the PANEL() parameter is invalid.
ISPP943
aaaaaaaa value missing - The value for aaaaaaaa parameter was omitted.
ISPP944
Invalid parameter value - The DISPLAY parameter value is invalid. Valid values are: NONE, IN, OUT, BOTH.
ISPP945
Invalid parameter value - The SCREEN() parameter value is invalid. Valid values are: * (current), 0 (all), or a screen id in the range 1-9, A-W.
ISPP946
Invalid parameter value - The SECTION() parameter values are invalid. Valid values are either '*', NONE, or a combination of: INIT, REINIT, PROC, or NOINIT, NOREINIT, NOPROC.
ISPP947
Invalid parameter value - The SERVICE() parameter value is invalid. Valid values are: NONE, DETAIL.
ISPP948
Invalid parameter value - The READ() parameter value is invalid. Valid values are: NONE, SUMMARY, DETAIL.
ISPP950
LIST substituted - Panel trace data set 'aaaaaaaa' not found. List of panel trace data sets displayed
ISPP951
No trace data sets found - No ISPF panel trace data set names were found matching 'aaaaaaaa'
ISPR000
CONTROL service error - An unexpected error received from the CONTROL service (RC=aaaaaaaa).
ISPR001
Invalid specification - From and To data sets cannot be the same when all members specified.
ISPR002
Parameters missing - The invocation parameters are required for batch execution.
ISPR003
Variable service error - An unexpected error received from variable services (RC=aaaaaaaa).
ISPR004
Display service error - An unexpected error received from the display service (RC=aaaaaaaa).
ISPR006
Member list error - An internal member list service error (RC=aaaaaaaa).
ISPR008
LIBDEF service error - An unexpected error was received from the LIBDEF service (RC=aaaaaaaa).
ISPR009
FIND service error - An unexpected error received from the FIND service (RC=aaaaaaaa).
ISPR010
ENQUEUE service error - An unexpected error was received from the ENQUEUE service (RC=aaaaaaaa).
ISPR011
Utility - ISPPREP - Panel 'aaaaaaaa' not converted. See previous log message.
ISPR012
Panel not processed - Panel 'aaaaaaaa' not converted. See ISPF log for explanation.
ISPR013
Utility - ISPPREP - Panel 'aaaaaaaa' in use by you or another user.
ISPR014
Panel in use - Panel 'aaaaaaaa' in use by you or another user.
ISPR015
DEQUEUE service error - An unexpected error was received from the DEQUEUE service (RC=aaaaaaaa).
ISPR016
STOW service error - An unexpected error was received from the STOW service (RC=aaaaaaaa).
ISPR017
I/O error on output - An unexpected error was received from the put service (RC=aaaaaaaa).
ISPR018
Output service error - An unexpected error was received from the output service (RC=aaaaaaaa).
ISPR019
Enter new member name - Member must be renamed when From and To data sets are the same.
ISPR020
Conversion of aaaaaaaa panels in progress - bbbbbbbb panels processed.
ISPR021
Utility - ISPPREP - Panel 'aaaaaaaa' already exists in output data set.
ISPR022
Panel not processed - Panel 'aaaaaaaa' already exists in output data set.
ISPR023
Conversion of aaaaaaaa panels in progress.
ISPR024
Utility - ISPPREP - Data set "aaaaaaaa" contains no members.
ISPR025
No members in data set - Data set "aaaaaaaa" contains no members.
ISPR026
Utility - ISPPREP - Panel 'aaaaaaaa' was not found in the PDS directory.
ISPR027
Member not found - Panel 'aaaaaaaa' was not found in the PDS directory.
ISPR028
Invalid output LRECL - ISPPREP output data set has an invalid LRECL, valid LRECL is between 80 160 for FB and 84 and 164 for VB.
ISPR030
Utility - preprocess - Panel 'aaaaaaaa' has been successfully converted.
ISPR031
Panel aaaaaaaa converted - Panel 'aaaaaaaa' has been successfully converted.
ISPR032
Utility - preprocess - aaaaaaaa panels have been successfully converted.
ISPR033
Panels converted - aaaaaaaa panels have been successfully converted.
ISPR034
Utility - preprocess - Unable to convert aaaaaaaa panels. Successfully converted bbbbbbbb panels.
ISPR035
Panels not converted - Unable to convert aaaaaaaa panels. Successfully converted bbbbbbbb panels.
ISPR037
From data set aaaaaaaa
ISPR038
to data set aaaaaaaa
ISPR039
to data set aaaaaaaa, newname = bbbbbbbb
ISPR040
Input parameter error - Required keyword parameter INPAN is missing.
ISPR041
Input parameter error - The INPAN and OUTPAN data set names must be unique.
ISPR042
Input parameter error - Input string "aaaaaaaa" contains syntax error or invalid keyword.
ISPR043
Input parameter error - Input string "aaaaaaaa" contains duplicate or conflicting keyword.
ISPR044
Input parameter error - Output member name is invalid when entire input library selected.
ISPR045
Input parameter error - Required keyword parameter OUTPAN is missing.
ISPR050
System abend aaaaaaaa - Abend aaaaaaaa encountered while processing panel bbbbbbbb.. The panel output library cccccccc is full.
ISPR051
System abend aaaaaaaa - Abend aaaaaaaa encountered while processing panel bbbbbbbb.. The panel output library cccccccc or the panel output volume is full.
ISPR053
ESTAE error - aaaaaaaa received return code bbbbbbbb from ESTAE.
ISPR054
System abend aaaaaaaa - Abend aaaaaaaa encountered while processing panel bbbbbbbb.
ISPS001
Terminal output error - ** ISPF screen output error - code = aaaaaaaa **
ISPS002
Terminal input error - ** ISPF screen input error - code = aaaaaaaa **
ISPS003
Trace - TPUT - - Tldaaaaaaaa length=bbbbbbbb option=cccccccc last 4 bytes=dddddddd
ISPS004
Trace - TGET - - Tldaaaaaaaa length=bbbbbbbb option=cccccccc
ISPS006
Terminal TPUT error - ** ISPF screen output error - code = aaaaaaaa - TPUT RC = bbbbbbbb **
ISPS007
Terminal TGET error - ** ISPF screen input error - code = aaaaaaaa - TGET RC = bbbbbbbb **
ISPS008
Data: hex=aaaaaaaa, EBCDIC='bbbbbbbb'
ISPS009
Tutorial test line - aaaaaaaa Cur panel = bbbbbbbb Prev panel = cccccccc Last msg = dddddddd
ISPS011
32K not available for attach of PMD - ** Logical screen request failed - insufficient storage.**
ISPS012
User action for ISPS011 - ** Log on with larger SIZE parameter **
ISPS013
Attach of PMD failed - ** Logical screen request failed - ATTACH RC= aaaaaaaa **
ISPS014
Immediate PMD termination after ATTACH - ** Logical screen request failed - abend aaaaaaaa **
ISPS015
User action for ISPS013 and ISPS014 - ** Contact your system programmer or dialog developer.**
ISPS016
No abend recovery till P.O.M PROC section processed ok - No dialog error recovery until a primary option menu is fully processed.
ISPS017
Error before error-free primary option menu known to DM - A dialog error has occurred before the dialog manager is initialized.
ISPS018
Invalid ZISPFRC value ('aaaaaaaa'), nonnumeric character found.
ISPS019
Invalid ZISPFRC value ('aaaaaaaa'), out of allowable range.
ISPS100
Invalid service name - 'aaaaaaaa' exceeds the allowable length of 8.
ISPS101
Service name missing - No dialog service request name found.
ISPS102
Invalid service name - 'aaaaaaaa' is not a recognized dialog service name.
ISPS103
Too many parameters - Unexpected parameters were found on the dialog service statement.
ISPS104
Error in subfield - An error was encountered in the subfield of the 'aaaaaaaa' keyword.
ISPS105
Invalid keyword - 'aaaaaaaa' is not a valid keyword for this service.
ISPS106
Subfield missing - 'aaaaaaaa' requires a subfield. None found.
ISPS107
Required parm missing - Not all required parameters were found for the aaaaaaaa service.
ISPS108
Invalid length - Parameter 'aaaaaaaa' exceeds the allowable length.
ISPS109
Unexpected list found - A list of names was found where a list was not expected.
ISPS110
Too many items in list - The number of names in the list exceeds aaaaaaaa.
ISPS111
Service string too long - Exceeds maximum length of 32767 bytes after variable substitution.
ISPS112
Var substitution error - Severe error while resolving symbolic variables in ISPEXEC statement.
ISPS113
Invalid name list - A name list must begin with a left parenthesis.
ISPS114
Conflicting keywords - Keyword 'aaaaaaaa' conflicts with a previously specified keyword.
ISPS115
Invalid keyword - 'aaaaaaaa' is not valid in the specified parameter position.
ISPS116
PDF services unavailable - Insufficient storage to load the PDF component of ISPF.
ISPS117
Invalid service request - The 'aaaaaaaa' service is not allowed via the ISPEXEC interface.
ISPS118L
SERVICE NOT INVOKED - A VALID ISPF ENVIRONMENT DOES NOT EXIST.
ISPS118S
SERVICE NOT INVOKED - A VALID ISPF ENVIRONMENT DOES NOT EXIST.
ISPS119
INVALID SERVICE - 'aaaaaaaa' service not supported in the batch environment.
ISPS190
No ADDPOP specified - The FRAME or BKGRND keyword was specified before an ADDPOP keyword was found on a SELECT statement.
ISPS191
Invalid frame type - An invalid FRAME value was specified on a SELECT service. The only valid values are STD, FIX or DLG.
ISPS192
Invalid background - An invalid BKGRND value was specified on a SELECT service. The only valid values are STD or DLG.
ISPS193
Conflicting parameters - WSCMD conflicts with another keyword.
ISPS200
SNAP macro error - SNAP macro error - aaaaaaaa ddname is not allocated.
ISPS201
SNAP macro error - Error from SNAP macro, return code = aaaaaaaa
ISPS202
SNAP dump generated - A SNAP dump has been generated.
ISPS203
SNAP macro error - SNAP macro error - no ddname has been specified for the SNAP macro.
ISPS204
SNAP dump in progress - A SNAP dump is currently being processed.
ISPS290
Conflicting parameters - WSCMD conflicts with another keyword.
ISPS291
WSCMD string too long - The parameter specified on SELECT WSCMD is too long.
ISPS292
WSCMDV variable error - The variable specified in the SELECT WSCMDV is either not defined or its contents are blank, or longer than 255 characters.
ISPS300
Name too long - Variable name supplied to the QTABOPEN service must be less than 8 characters in length
ISPS301
List truncated - More data was available to return by the QTABOPEN service, however no more space is available to construct a valid variable name. aaaaaaaa instances of the list variable have been created.
ISPS310L
COMMAND NOT INVOKED - A VALID ISPF ENVIRONMENT DOES NOT EXIST.
ISPT001
Internal table error - aaaaaaaa detected an invalid DTA or DTB control block.
ISPT002
Internal table error - aaaaaaaa detected an invalid service request or RDA.
ISPT003
Internal table error - Row data area not large enough to contain the updated row.
ISPT004
Internal table error - aaaaaaaa detected error during SAWA construction.
ISPT005
Internal table error - aaaaaaaa detected an invalid name value work area.
ISPT006
Variable services error - aaaaaaaa received return code bbbbbbbb from ISPDVCGT.
ISPT007
Router service error - aaaaaaaa is unknown table service.
ISPT008
GETMAIN error - aaaaaaaa received return code bbbbbbbb from GETMAIN.
ISPT009
FREEMAIN error - aaaaaaaa received return code bbbbbbbb from FREEMAIN.
ISPT010
Internal table error - aaaaaaaa detected an invalid name list work area.
ISPT011
DEQUEUE error - aaaaaaaa received return code bbbbbbbb from DEQUEUE.
ISPT012
ENQUEUE error - aaaaaaaa received return code bbbbbbbb from ENQUEUE.
ISPT013
Internal table error - aaaaaaaa received return code bbbbbbbb from TFD build.
ISPT014
Error on RDJFCB - aaaaaaaa received return code bbbbbbbb from RDJFCB.
ISPT015
BLDL/FIND error - aaaaaaaa received return code bbbbbbbb from BLDL/FIND.
ISPT016
I/O error on PUT - aaaaaaaa received I/O error indication from common PUT.
ISPT017
I/O error on GET - aaaaaaaa received I/O error indication from common GET.
ISPT018
STOW error - aaaaaaaa received decimal return code bbbbbbbb, decimal reason code cccccccc from the STOW macro.
ISPT019
Internal table error - aaaaaaaa received return code bbbbbbbb from table delete.
ISPT020
Internal table error - Table information record (TIR) cannot fit into block.
ISPT021
Parameter conflict - TBSKIP service request specifies row number and row ID.
ISPT022
Unexpected EOF - Unexpected end-of-file received while reading table member.
ISPT023
WRITE/NOWRITE conflict - TBOPEN for table aaaaaaaa specifies conflicting WRITE/NOWRITE option.
ISPT024
Error on input/output - Unexpected return code aaaaaaaa from CDG/CDP. RC=13 implies disk full.
ISPT025
Library format error - First table record read does not have TIR: as identifier.
ISPT026
ESTAE error - aaaaaaaa received return code bbbbbbbb from ESTAE.
ISPT027
System abend aaaaaaaa - Abend aaaaaaaa encountered while processing table bbbbbbbb.
ISPT028
Internal table error - aaaaaaaa detected an invalid scan argument work area.
ISPT029
Table not in write mode - TBSAVE issued for table aaaaaaaa that is not in write mode.
ISPT030
Error opening aaaaaaaa - Error occurred attempting to open input table library.
ISPT031
Error opening aaaaaaaa - Error occurred attempting to open output table library.
ISPT032
No scan arguments - No arguments established for TBSCAN of table aaaaaaaa.
ISPT033
Table already open - aaaaaaaa issued for table bbbbbbbb that is already open.
ISPT034
Table is not open - aaaaaaaa issued for table bbbbbbbb that is not open.
ISPT035
Library not allocated - aaaaaaaa library is not allocated.
ISPT036
Table in use - aaaaaaaa issued for table bbbbbbbb that is in use, ENQUEUE failed.
ISPT037
Library format error - Invalid record: Table=aaaaaaaa TTRN=bbbbbbbb Offset=cccccccc.
ISPT038
Table structure error - aaaaaaaa for table bbbbbbbb detected an invalid internal table structure.
ISPT039
PAD value invalid - PAD value specified on aaaaaaaa command is invalid.
ISPT040
File not found. - File "aaaaaaaa" was not found
ISPT041
File not accessed. - File "aaaaaaaa" is not accessed
ISPT042
FSSTATE error - Return code aaaaaaaa received from FSSTATE.
ISPT043
VMSPF error - Code x'aaaaaaaa' from VMSPF virtual machine for file bbbbbbbb.
ISPT044
ENQUEUE error - Error occurred on ENQUEUE for file 'aaaaaaaa' - rc=bbbbbbbb.
ISPT045
DEQUEUE error - Error occurred on DEQUEUE for file 'aaaaaaaa' - rc=bbbbbbbb.
ISPT046
Filemode not supported - Filemode of '*' is not supported for output file "aaaaaaaa."
ISPT047
Library allocation error - Error occurred during the allocation of library aaaaaaaa.
ISPT048
Read-only disk - Write failed for aaaaaaaa, disk read only.
ISPT050
Table panel unavailable - Unable to process reinvocation. Enter HELP for more information.
ISPT051
Panel "aaaaaaaa" error - The body of a TBDISPL panel must have a command field.
ISPT052
Panel "aaaaaaaa" error - The model line(s) must contain 1 or more input/output fields.
ISPT053
Invalid VARS value - Vars="aaaaaaaa" is invalid or missing.
ISPT054
Invalid VARS value - A "Z" variable replacement name within is a duplicate field name.
ISPT056
Invalid VARS value - The # of field names does not match # of "Z" in/out fields on model line(s)
ISPT057
Panel "aaaaaaaa" error - Unable to fit at least 1 table entry on screen, due to panel format.
ISPT058
Panel "aaaaaaaa" error - Table display panel must have ")MODEL" and 1-8 model lines
ISPT060
Table display loop - No more selections to process (End key pressed or panel never given)
ISPT061
Table "aaaaaaaa" error - Attempt to process a table row that no longer exists.
ISPT062
Table display error - Scroll return variable ZTDSCRP does not exist in the function pool.
ISPT063
Table display error - The value of scroll return variable ZTDSCRP, 'aaaaaaaa', is invalid.
ISPT064
DMSCSL invocation error - aaaaaaaa received csl return code 'bbbbbbbb' from cdsn.
ISPT065
DMSCSL invocation error - aaaaaaaa received csl return code 'bbbbbbbb' from CFI.
ISPT066
Invalid parameter - AUTOSEL parameter was not YES, NO, or blank. It was "aaaaaaaa".
ISPT067
SFS directory full - SFS directory's space limit exceeded a rollback has occurred.
ISPT068
No authority for file - Not authorized to write to file on directory accessed as "aaaaaaaa"
ISPT070
System abend aaaaaaaa - Abend aaaaaaaa encountered while processing table bbbbbbbb.. The table output library cccccccc is full.
ISPT071
System abend aaaaaaaa - Abend aaaaaaaa encountered while processing table bbbbbbbb.. The table output library cccccccc or the table output volume is full.
ISPT072
Directory full - aaaaaaaa received return code bbbbbbbb from STOW. The table output library cccccccc directory is full.
ISPT073
Cannot process table - The table cannot be processed by the ISPF Table Utility because it contains a variable named aaaaaaaa.. Variable names with a prefix of 'ZTD' or 'ZTB' are reserved for use by the ISPF table processing and the ISPF Table Utility.
ISPT074
Cannot process table - The table cannot be processed by the ISPF Table Utility because it contains an extension variable named aaaaaaaa. in row bbbbbbbb.. Variable names with a prefix of 'ZTD' or 'ZTB' are reserved for use by the ISPF table processing and the ISPF Table Utility.
ISPT080
aaaaaaaa Conflict - bbbbbbbb(cccccccc) - Table processing conflict.
ISPT081
aaaaaaaa - Table last accessed bbbbbbbb cccccccc., last modified dddddddd eeeeeeee..
ISPT082E
Edit Profile
ISPT082I
ISPF Profile
ISPT082O
Other Profile Table
ISPT082P
Application Profile
ISPT082R
Reference List
ISPT082S
System Profile
ISPT083
Data set in use - Data set 'aaaaaaaa' in use by another user, try later or enter HELP for a list of jobs and users allocated to 'aaaaaaaa'.
ISPT101
Storage release error - Error encountered during storage release by TBSORT service.
ISPT102
No storage available - Insufficient storage available to perform TBSORT service.
ISPT103
Invalid sort key - The name 'aaaaaaaa' is not a column name of this table.
ISPT104
Invalid direction code - The given sort direction code of 'aaaaaaaa' must be an A or a D.
ISPT105
Invalid sort type 'aaaaaaaa' - The valid table sort types are B, C, N, or Y.
ISPT106
Value too large - The sort field 'aaaaaaaa' was too large to convert to binary.
ISPT107
Invalid sort digit - The digit 'aaaaaaaa' found in the sort field cannot be converted.
ISPT108
Sort value too large - A string greater than 16 characters is too long to convert.
ISPT109
Invalid scan operator - The given operator 'aaaaaaaa' is not a valid scan operator.
ISPT200
Invalid name-op pair - The given name 'aaaaaaaa' is not a valid search argument.
ISPT201
Too many operators - More operators than arguments were specified
ISPT202
Invalid number of rows - The number of rows must be a positive number less than 32768
ISPT203
Table row too long - aaaaaaaa was requested for a row bbbbbbbb bytes long. Maximum length is 65536.
ISPT204
Invalid LIBDEF usage - A LIBDEF definition for ISPTABL cannot be used for table input processing
ISPT205
Invalid LIBDEF usage - A LIBDEF definition for ISPTLIB cannot be used for table output processing
ISPT206
File recall failed - File 'aaaaaaaa' is migrated and implicit recall failed.
ISPT207
Invalid year offset - The year offset must be a value from 1 to 7.
ISPT208
AVL SORT error - AVL Sort DSA exhausted. Contact IBM.
ISPU330
Invalid command table - The command table has keys, and therefore cannot be processed.
ISPU331
Input command error - Command entered is not recognized.
ISPU332
Invalid appl ID - Application IDs ISP and ISR are not allowed.
ISPU333
Appl ID too long - Application IDs have a maximum length of four characters.
ISPU334
Invalid line command - D, I, R, and E are the only valid line commands.
ISPU335
Starter line substituted - To delete a table, delete all lines and enter END command.
ISPU336
Verb too short - Command table verbs must be at least two characters long.
ISPU337
Invalid verb - Command table verbs must begin with an alphabetic character.
ISPU338
Invalid T or Trunc value - Command table truncation values must be within the length of the verb.
ISPU339
Invalid action field - Incorrect data entered for the action field.
ISPU339A
Severe error - A severe error occurred on the TBOPEN for the command table.
ISPU340
Invalid appl ID - Enter up to 4 alphanumeric characters. The first must be alphabetic.
ISPU341
Table in use - The command table specified is already open and cannot be opened again.
ISPU342
Invalid line command - V is the only valid line command.
ISPU343
Entry updated - The change to command was updated, but has not been saved in the command table yet. You must exit (save) from the Command Table Utility to make the change permanent.
ISPU344
Entry unchanged - The change to command was ignored.
ISPV000
Invalid variable name - Variable 'aaaaaaaa' in list 'bbbbbbbb' is syntactically incorrect.
ISPV001
Variable not modifiable - Variable 'aaaaaaaa' is reserved by the system.
ISPV002
Insufficient storage - Not enough main storage was available to satisfy request.
ISPV003
Invalid variable blocks - Pool initialization must be matched with pool termination.
ISPV004
Descriptor already used - Variable 'aaaaaaaa' in list 'bbbbbbbb' is already defined.
ISPV005
Destructive move - Source and target overlap destructively. No data was moved.
ISPV006
Data truncation occurred - Data for aaaaaaaa format variable "bbbbbbbb" was too long.
ISPV007
Invalid data characters - Data for aaaaaaaa format variable "bbbbbbbb" was not aaaaaaaa characters.
ISPV008
Invalid data length - Length of "aaaaaaaa" is bbbbbbbb - valid lengths are 0 to 32767.
ISPV009
Invalid variable name - Variable 'aaaaaaaa' is syntactically incorrect.
ISPV010
Profile not loaded - Profile table 'aaaaaaaa' not read. Table service RC=bbbbbbbb.
ISPV011
Profile table not found - Unable to access aaaaaaaa table for variable bbbbbbbb.
ISPV012
Invalid VDEFINE keyword - 'aaaaaaaa' is not valid. Use COPY, NOBSCAN, or LIST.
ISPV013
Variable exit error - Exit routine at aaaaaaaa gave error code bbbbbbbb for cccccccc of dddddddd.
ISPV014
Required parm missing - User-data block is required with USER format VDEFINEs.
ISPV015
Profile full - Profile variable 'aaaaaaaa' not saved. 'bbbbbbbb' table is full.
ISPV016
R/O profile not loaded - R/O profile table 'aaaaaaaa' not read. Table service RC=bbbbbbbb.
ISPV017
Invalid format - Invalid VDEFINE format 'aaaaaaaa' found for variable 'bbbbbbbb'.
ISPV020
Variable access invalid - A valid CLIST environment does not exist.
ISPV021
Invalid aaaaaaaa request - Variable name 'bbbbbbbb' is not a valid REXX variable name.
ISPV022
Invalid variable name - Variable name 'aaaaaaaa' is syntactically incorrect.
ISPV023
Data has been truncated - The maximum length of CLIST variable data is 32767 characters.
ISPV024
Invalid SET request - CLIST variable 'aaaaaaaa' is a system variable. Not modifiable.
ISPV025
Invalid SET request - CLIST variable 'aaaaaaaa' not updated because it is a label element.
ISPV026
Invalid GET request - CLIST variable 'aaaaaaaa' requires evaluation. Not supported.
ISPV027
Invalid GET request - CLIST variable 'aaaaaaaa' not retrieved because it is a label element.
ISPV028
IKJCT441 interface error - The caller is not in a CLIST or REXX environment. Return code = 40. This could be a result of not having the function pool flag set in the ISPTCM table for the command being executed.
ISPV029
IKJCT441 interface error - Severe error accessing CLIST variables. Return code = 'aaaaaaaa'.
ISPV030
Too Many Symbol Names - VGET service specifies more symbol names than dialog variables.
ISPV040
Invalid PACK(N) - N value of PACK(N) must be between 0 and 18.
ISPV041
Incompatible pack length - PACK(N) format specified requires a length greater than was specified.
ISPV042
Invalid VDEFINE syntax - A format of "*" must have an "*" in the corresponding name position in the VDEFINE parameters.
ISPV043
Invalid VDEFINE syntax - An "*" format must be specified with at least one other valid format and the list option specified.
ISPV044
Invalid format data - Data contains invalid hex character for packed format
ISPV045
Invalid data length - Length of "aaaaaaaa" is bbbbbbbb - valid lengths are 4 and 8.
ISPV046
Invalid data length - Length of "aaaaaaaa" is bbbbbbbb - valid lengths are 1 to 10.
ISPV047
Invalid data length - Length of "aaaaaaaa" is bbbbbbbb - valid lengths are 2 to 32767.
ISPV048
Invalid data string - Variable "aaaaaaaa" must contain a null terminator.
ISPV050
Invalid mask format - Format "aaaaaaaa" is not a valid mask format.
ISPV051
Invalid mask length - Invalid length "aaaaaaaa" specified for the VMASK service
ISPV052
Invalid variable mask - The specified mask contains invalid format characters.
ISPV053
Invalid variable data - The specified variable contains invalid data for the specified variable mask.
ISPV054
Invalid variable length - The specified variable value is an invalid length.
ISPV055
Variable not masked - The specified variable in the VEDIT is not a masked variable.
ISPV056
Invalid variable format - The specified variable's VDEFINE format is invalid for the VMASK service.
ISPV057
Invalid user mask - A mask should contain at least one of these characters: A, 9, H, N, or X.
ISPV058
Variable not VDEFINEd - The specified variable has not been VDEFINEd.
ISPV059
Invalid variable mask - "B" can only be embedded. Blanks cannot begin or end a variable mask.
ISPV200
Bad service code - The service code passed to ISPDVCLX was not a valid one.
ISPV201
Truncation occurred - A variable was truncated on return from the EXECCOMM interface.
ISPV202
Bad variable name - A bad variable name was requested from the EXECCOMM interface.
ISPV203
Bad variable value - The value of the variable was too long.
ISPV204
Bad EXECCOMM func. code - The function code passed to EXECCOMM was invalid.
ISPV300
Trace complete - The Trace output is has been written to SYSOUT allocated to the DDname ISPVCALL.
ISPV301
LIST substituted - ISPVCALL trace data set 'aaaaaaaa' not found. List of ISPVCALL trace data sets displayed
ISPV302
No trace data sets found - No ISPVCALL trace data set names were found matching 'aaaaaaaa'
ISPW001
ADDPOP service error - ADDPOP service issued before first panel display.
ISPW002
ADDPOP service error - Consecutive ADDPOP services without a panel display.
ISPW003
REMPOP service error - There are no active pop-up windows at the current select level.
ISPW004
Windowing error - Request to resume windowing however windowing not suspended.
ISPW005
Windowing error - Unable to ADDPOP due to previous panel display error.
ISPW008
Windowing error - MSGLOC field "aaaaaaaa" is not defined on the panel.
ISPW009
Internal error - Service request to module ISPWIN specified invalid name.
ISPWB000
Client requested ISPF session initialization Userid: aaaaaaa ASIDX: bbbb Message Queue: cccccccccc CCSID: ddddd
ISPWB001
Request received from client to force termination. Userid: aaaaaaa ASIDX: bbbb
ISPWB002
Call to BPX1QSN to send a message to the queue failed. Return code: 'aaaa'X Reason code: 'bbbb'X
ISPWB003
Call to BPX1QRC to read a message from the queue failed. Return code: 'aaaa'X Reason code: 'bbbb'X
ISPWB004
Call to BPX1QRC returned a message of length zero. Return code: 'aaaa'X Reason code: 'bbbb'X
ISPWS000
Invalid CODEPAGE and CHARSET values were specified on the WSCON service. Both parameters must be specified in order to be used.
ISPWS001
A conflict in parameters was specified on the WSCON service. Only one of these parameters can be specified: IP, LU, or FI.
ISPWS002
Not connected - A request has been made to disconnect from the workstation, but there is currently no connection.
ISPWS003
Cannot disconnect - Your GUI session was invoked with GUISCRD and/or GUISCRW sizes different from your actual 3270 screen size. Therefore, you cannot disconnect and begin displaying screens in 3270 mode.
ISPWS004
The variable specified in the WSCON IP or LU parameter cannot be found or has a blank value. A value is required in order to make a connection to the workstation.
ISPWS005
A conflict in parameters was specified on the WSCON service. Only one of these parameters can be specified: IP, LU, or FI. Select the appropriate network protocol and specify the machine address where needed.
ISPWS006
The variable specified in the WSCON TITLE parameter cannot be found.
ISPWS007
No connection - The user hit end, exit, or cancel from the 'Initiate Workstation Connection' panel before attempting a connection.
ISPWS008
An invalid value has been specified for the aaaaaaaa parameter on the WSCON service.
ISPWS009
An invalid value has been specified for the aaaaaaaa parameter on the WSCON service. The panel field has been initialized with the value from the system profile. Select an appropriate value if this default is not the preferred value.
ISPWS010
Cannot disconnect - You cannot disconnect from the workstation while running in batch GUI mode.
ISPWS011
You must specify one of the parameters IP, LU, or FI, or make sure that there is a valid network protocol value saved in the system profile.
ISPWS012
An IP, LU, or FI parameter was not specified on the WSCON service and there was no valid network protocol value saved in the system profile. Select a network protocol and specify a valid machine address where appropriate.
ISPWS013
Cannot disconnect - You cannot disconnect from the workstation while running the Workstation Tool Integration Configuration Program. Exit the tool first, and then invoke WSDISCON.
ISPWS014
Not disconnected - You selected to not disconnect from the workstation at this time.
ISPWS015
Disconnected - You have successfully disconnected from the workstation.
ISPWS016
Cannot switch - You cannot switch this logical screen to your 3270 emulator session while running in batch mode.
ISPWS017
Cannot change format - You cannot change the screen format when running in GUI mode and at least one session is running in 3270 mode.
ISPWS018
Cannot switch - Your GUI session was invoked with GUISCRD and/or GUISCRW sizes different from your actual 3270 screen size. Therefore, you cannot switch and display screens in 3270 mode.
ISPWS019
Cannot switch - You cannot switch to GUI mode if you do not have a workstation connection and this logical screen has not previously been in GUI mode.
ISPWS022
Required parm missing - Not all required parameters were found for the TSOGUI service. While running GUI mode with TSO line mode support, TSOGUI OFF specifies that the ISPF/TSO window is suspended and all fullscreen and line mode data appears in the 3270 window. TSOGUI ON specifies that the ISPF/TSO window is resumed and all TSO line mode output and input is directed to the ISPF/TSO window.
ISPX001
Internal error - Service request to module ISPXFR specified invalid name.
ISPX002
Transfer completed - Transfer of host data set to workstation completed successfully.
ISPX007
Transfer error - The "HOST" or "WS" variable was not specified properly in the FILEXFER service.
ISPX008
Transfer error - The "TO" direction on the FILEXFER service is not valid. The value must be "HOST " or "WS ".
ISPX009
Transfer error - The host data set name is longer than 56 characters.
ISPX010
Transfer failed - The FILEXFER service failed because there is no connection to the workstation.
ISPX011
Transfer failed - An error occurred while transferring the file with the FILEXFER service. The file was not transferred.
ISPX012
Transfer failed - An error occurred while transferring the file with the FILEXFER service. The file was not transferred. The user may have disallowed file transfer.
ISPX013
Transfer failed - An error occurred while transferring the file with the FILEXFER service. The host data set or member could not be opened or found. The file was not transferred.
ISPX014
Transfer failed - An error occurred while transferring the file with the FILEXFER service. The workstation file could not be opened or found. The file may be specified wrong, the path may be specified wrong, the path may not exist, the target disk may be read-only, or the target drive may not exist. The file was not transferred.
ISPX015
Transfer failed - An error occurred while transferring the file with the FILEXFER service. There was an error reading the host data set or member. The file was not transferred.
ISPX016
Transfer failed - An error occurred while transferring the file with the FILEXFER service. There was an error reading the workstation file. The file was not transferred.
ISPX017
Transfer failed - An error occurred while transferring the file with the FILEXFER service. There was an error writing the host data set or member. There may not be sufficient space to write the data set or member. The file was not transferred.
ISPX018
Transfer failed - An error occurred while transferring the file with the FILEXFER service. There was an error writing the workstation file. The disk may be full. The file was not transferred.
ISPX019
Transfer failed - An error occurred while closing the host data set. The directory may be full. The file was not transferred.
ISPX020
LMMSTATS failed - The file was successfully transferred, but ISPF was unable to create the statistics for the file.
ISPX021
Transfer failed - An error occurred while closing the workstation file. The file was not transferred.
ISPX022
Transfer rejected - The user refused file access when accepting the workstation connection.
ISPX023
File transfer service error occurred while transferring the host image file from the data set allocated to DD ISPILIB. The host data set or member could not be opened or found. The file was not transferred.
ISPX024
File transfer failed - A file transfer error occurred while attempting to transfer a workstation file to the host. The receiving host file is in use or is open.
ISPX100
FILESTAT failed - The FILESTAT service failed because there is no connection to the workstation.
ISPX101
FILESTAT error - The "file" variable was not specified properly in the FILESTAT service.
ISPX102
FILESTAT error - LRECL, DATE, or both LRECL and DATE must be specified on the FILESTAT service.
ISPX103
Internal error - Service request to module ISPWFS specified invalid name.
ISPYB011
Command not recognized - Valid line commands are: I (insert), D (delete), R (repeat).
ISPYB012
Invalid service name - 'aaaaaaaa' is not a valid ISPF service.
ISPYB013
Invalid WHEN condition - WHEN not recognized, specify BEFORE, AFTER, or Rnn
ISPYB014
Invalid function name - The function name specified does not follow ISPF naming convention.
ISPYB015
Invalid active status - Active status type not recognized. Specify YES or NO
ISPYB017
Invalid command - 'aaaaaaaa' is not a valid breakpoints command.
ISPYB018
'aaaaaaaa' not found - The service name does not exist in the breakpoints list.
ISPYB019
'aaaaaaaa' found - Service name was located, and appears on the first line.
ISPYB021
aaaaaaaa failed - bbbbbbbb request is not recognized by aaaaaaaa service routine.
ISPYB022
aaaaaaaa failed - Breakpoint not set, bbbbbbbb is not a valid dialog management service name.
ISPYB023
ISPYBI failed - aaaaaaaa returned rc(bbbbbbbb) request(cccccccc failed during setup)
ISPYB024
ISPYBI failed - aaaaaaaa returned rc(bbbbbbbb) request(cccccccc failed during create table)
ISPYB025
ISPYBI failed - aaaaaaaa returned rc(bbbbbbbb) request(cccccccc failed during initialize table)
ISPYB026
ISPYBI failed - aaaaaaaa returned rc(bbbbbbbb) request(cccccccc failed during edit control)
ISPYB027
ISPYBI failed - aaaaaaaa returned rc(bbbbbbbb) request(cccccccc failed during build chain)
ISPYB028
aaaaaaaa failed - Breakpoint not set, function 'bbbbbbbb' is not a valid function name.
ISPYB029
aaaaaaaa failed - Breakpoint not set, 'bbbbbbbb' is not a valid WHEN condition.
ISPYB031
Service name not entered - The service name is required to establish a breakpoint.
ISPYB032
Command conflict - 'aaaaaaaa' is within range of the D command. Correct either one.
ISPYB033
Too many parameters - No parameters are defined for this command.
ISPYB034
Enter service name - Enter the name of the service to be located.
ISPYB035
Too many parameters - A service name is the only valid parameter for the LOCATE command.
ISPYB036
Invalid service name - A service name must not be longer than 8 characters.
ISPYB037
Test mode not active - You must be running an application from Dialog Test, but not in Dialog Test to issue the DTEST command.
ISPYB038
Invalid parameter - You specified an invalid parameter on the DTEST command. The only valid parameters are 1 through 8.
ISPYB039
Switch to Test failed - ISPF was not able to switch from the user's environment to the Dialog Test environment.
ISPYF010
aaaaaaaa failed - bbbbbbbb returned return code cccccccc request(dddddddd).
ISPYF011
Enter function name - The name of a panel, command, or program must be entered.
ISPYF012
Panel select complete - Select of the requested panel is complete.
ISPYF013
Function rc = aaaaaaaa - The specified function completed with a return code of aaaaaaaa.
ISPYF014
Invalid value - Enter YES or NO at the cursor position.
ISPYF015
Enter one name only - More than one name was entered for a panel, command, program, or request.
ISPYF016
Language invalid - Language must be APL, CREX, or blank.
ISPYF017
No parms specified - Enter YES or NO for extended plist only if PARM specified.
ISPYF018
MODE invalid - MODE must be either LINE, FSCR, or blank.
ISPYF019
Conflicting values - Selecting PASSLIB is valid only when NEWAPPL is also specified.
ISPYL011
ISPYLI failed - ISPYXEM returned rc(aaaaaaaa) request(entry failed).
ISPYL012
ISPYLI failed - ISPYLS returned rc(aaaaaaaa), more details precede this message in the log.
ISPYL013
Log data set empty - Log data is empty. Browse cannot be performed.
ISPYL014
I/O error - An I/O error was encountered reading the first record requested.
ISPYL015
Insufficient storage - Not enough storage is available for browse to proceed.
ISPYL016
Invalid browse panel - Panel ISPYLP1 is invalid. Contact the system programmer.
ISPYL017
Recursion error - Recursive use of ISPF functions (in this case browse) is not allowed.
ISPYL018
Browse severe error - Severe error occurred in module ISRCBR.
ISPYP011
Parameter missing - Either panel name or message must be entered.
ISPYP012
aaaaaaaa failed - bbbbbbbb returned return code cccccccc request(dddddddd)
ISPYP013
.RESP=ENTER reset - The panel contained a .RESP=ENTER statement. The value has been ignored for this display request.
ISPYP014
.RESP=ENTER changed - The panel contained a .RESP=ENTER statement. This value was overridden in order to exit this display request.
ISPYR011
Command not recognized - Valid line commands are: I (insert), D (delete), R (repeat).
ISPYR012
Command conflict - 'aaaaaaaa' is within range of the D command. Correct either one.
ISPYR013
Invalid active status - Active status type not recognized, specify YES or NO.
ISPYR014
Too many parameters - No parameters are defined for this command.
ISPYR015
Invalid command - 'aaaaaaaa' is not a valid trace command.
ISPYR016
Invalid function name - The function name specified does not follow ISPF naming convention.
ISPYR021
aaaaaaaa failed - bbbbbbbb request is not recognized by aaaaaaaa service routine.
ISPYR022
ISPYRFI failed - aaaaaaaa returned rc (bbbbbbbb) request (cccccccc failed during setup).
ISPYR023
ISPYRFI failed - aaaaaaaa returned rc (bbbbbbbb) request (cccccccc failed during create table).
ISPYR024
ISPYRFI failed - aaaaaaaa returned rc (bbbbbbbb) request (cccccccc failed during initialize table).
ISPYR025
ISPYRFI failed - aaaaaaaa returned rc (bbbbbbbb) request (cccccccc failed during edit control).
ISPYR026
ISPYRFI failed - aaaaaaaa returned rc (bbbbbbbb) request (cccccccc failed during build chain).
ISPYR031
Function name required - Enter a function name or ALL for all functions.
ISPYR032
Invalid service name - 'aaaaaaaa' is not a valid dialog management service.
ISPYR033
Invalid service name - A service name must not be longer than 8 characters.
ISPYR034
'aaaaaaaa' not found - The function name does not exist in the trace list.
ISPYR035
'aaaaaaaa' found - Function name was located, and appears on the first line.
ISPYR037
Enter function name - Enter the name of the function to be located.
ISPYR038
Too many parameters - A function name is the only valid parameter for the LOCATE command.
ISPYR039
Invalid function name - A function name must not be longer than 8 characters.
ISPYR041
Variable name required - Enter a variable name or ALL for all variables.
ISPYR042
Enter variable name - Enter the name of the variable to be located.
ISPYR043
Too many parameters - A variable name is the only valid parameter for the LOCATE command.
ISPYR044
Invalid variable name - A variable name must not be longer than 8 characters.
ISPYR045
Invalid operation - Valid operations are GET, PUT, CHG, or ALL.
ISPYR046
Invalid pool specified - Enter F (function), S (shared), P (profile).
ISPYR047
'aaaaaaaa' not found - The variable name does not exist in the trace list.
ISPYR048
'aaaaaaaa' found - Variable name was located, and appears on the first line.
ISPYR049
Invalid variable syntax - Variable name must be alphanumeric and the first character cannot be numeric.
ISPYS011
Enter dialog service - The desired dialog service and its parameters must be entered.
ISPYS012
Service rc = aaaaaaaa - The specified dialog service completed with a return code of aaaaaaaa.
ISPYS013
CONTROL not allowed - The dialog CONTROL service cannot be invoked from this panel.
ISPYS014
aaaaaaaa failed - bbbbbbbb returned return code cccccccc request (dddddddd).
ISPYS015
Data will be saved - Data entered on this screen will be saved upon exit.
ISPYS016
Data will be cleared - Data entered on this screen will not be saved upon exit.
ISPYT010
Table is not open - Function requires an open table, open via option 6.
ISPYT011
Table not found - The specified table could not be found.
ISPYT012
Invalid command - 'aaaaaaaa' is not a valid command for this table operation.
ISPYT013
'aaaaaaaa' not found - The key or name 'bbbbbbbb' was not found in the table.
ISPYT014
'aaaaaaaa' was found - The key or name 'bbbbbbbb' was found in the table.
ISPYT015
Table in use - The specified table is in use by another user, it cannot be opened.
ISPYT016
Library not allocated - The input table library is not allocated.
ISPYT017
Enter table name - The name of the table is required.
ISPYT018
Enter option - A valid option must be entered.
ISPYT019
Invalid option - Your selection is not valid.
ISPYT020
Name too long - Variable names are eight characters maximum.
ISPYT021
Row not added - Blank row was not added, operation was canceled.
ISPYT022
Invalid hex data - Enter valid hex characters in multiples of two.
ISPYT024
Table aaaaaaaa opened - Table aaaaaaaa opened in bbbbbbbb mode by dialog test.
ISPYT025
Table aaaaaaaa closed - Table aaaaaaaa closed by dialog test.
ISPYT031
No argument specified - A search argument is necessary for the LOCATE command.
ISPYT032
Row number invalid - Row number must be greater than zero.
ISPYT033
'aaaaaaaa' was found - Variable 'aaaaaaaa' was found in the row.
ISPYT034
'aaaaaaaa' not found - Variable 'aaaaaaaa' was not found in the row.
ISPYT035
Command conflict - A line command is within the range of the D command. Correct either one.
ISPYT036
Invalid name - Variable name characters/syntax is not valid.
ISPYT037
Too many parameters - No parameters are defined for the 'CANCEL' command.
ISPYT038
Too many parameters - Only one argument may be entered with the LOCATE command.
ISPYT039
Use TOP - Use TOP for adding row 1.
ISPYT040
Key/name protected - Key and name variables may not be deleted.
ISPYT041
Row exceeds table size - The specified row number is greater than the table size.
ISPYT042
Invalid row identity - The table row must be specified as a number.
ISPYT043
Row not identified - Enter a search argument or a row number.
ISPYT044
Function invalid - The function code is not valid.
ISPYT045
Row not found - No row matches the search argument.
ISPYT046
Row found - A row matching the search argument was found.
ISPYT047
Row not deleted - The specified row was not deleted from the table.
ISPYT048
Row aaaaaaaa deleted - Row aaaaaaaa was deleted from the table.
ISPYT049
Row not deleted - No match searching keyed table, or CRP was at top.
ISPYT050
Key/name not modifiable - Key and name variables may not be changed.
ISPYT051
Keys are not unique - Another row in the table has the same key values.
ISPYT052
Row modified - The specified row has been modified.
ISPYT053
Row added - A new row has been added following the current row.
ISPYT054
Operation canceled - No rows have been added or modified.
ISPYT055
Row not added - A row has not been added to the table.
ISPYT056
Table is at top - Display, modify and CANCEL are not valid when the table is at top.
ISPYT057
Invalid line command - Valid table commands are I (insert), R (repeat), and D (delete).
ISPYT058
Top is not valid - Top is only valid for adding a row.
ISPYT059
New row added - The keys did not match an existing row.
ISPYT060
Enter WRITE or NOWRITE - Save option is specified as WRITE or NOWRITE.
ISPYT061
Enter YES or NO - Replace option is specified as YES or NO.
ISPYT062
Table not created - The specified table was not created due to error.
ISPYT063
Table created - The table was created. If WRITE, it is closed.
ISPYT064
Enter names - The names of keys or names is required.
ISPYT065
Table create canceled - The table create function was canceled.
ISPYT066
Invalid command - Only the CANCEL command is valid now.
ISPYT067
Enter table name - Table name is a required field.
ISPYT068
Use TOP - Use TOP for adding row 1.
ISPYT069
Save/name not deleted - Only save names can be deleted.
ISPYT070
Windowed panel - The panel or panels for the selected option will appear in a pop-up window.
ISPYT071
Full screen panel - The panel or panels for the selected option will appear in a full screen display.
ISPYT072
Retrieved - The command has been retrieved.
ISPYV000
No LOCATE string - In order to use the RFIND command, you must have previously issued a LOCATE command.
ISPYV001
Invalid pool specified - Enter F, I, S, or P.
ISPYV002
Command not recognized - The valid line commands are I (insert) and D (delete).
ISPYV003
Duplicate variable - Variables within each pool must have unique names.
ISPYV004
Invalid command - The command entered is not a valid variables command. Valid commands are LOCATE variable, SORT, SORT NAME and SORT VALUE. Valid abbreviations are L, LOC, SORT N, SORT V, and SORT VAL. The default SORT command sorts the list by variable pool and variable name.
ISPYV005
No argument specified - A search argument is necessary for the LOCATE command.
ISPYV006
Variable name found - The specified variable appears at the top of the display.
ISPYV007
Bottom of Data Reached - The specified variable was not found in the list of variables. Press RFIND to continue searching from the top of the list.
ISPYV008
Non-modifiable variable - This is a system variable and may not be altered/deleted by the user.
ISPYV009
Variable name required - A variable name is required if data is entered for pool or value.
ISPYV011
Invalid hex data - Enter valid hex characters in multiples of two.
ISPYV012
aaaaaaaa failed - bbbbbbbb returned return code cccccccc request (dddddddd).
ISPYV013
Invalid variable syntax - Variable name must be alphanumeric and the first character cannot be numeric.
ISPYV014
Delete not allowed - The indicated line may not be deleted.
ISPYV015
Delete not allowed - Multiple DELETE line command not allowed.
ISPYV016
Sort completed - The table was sorted by variable name within profile pools.
ISPYV017
The specified variable name does not exist in the list. The list has been positioned at the next nearest match. Press RFIND to locate the nearest match in the next variable pool.
ISPYV301
Internal test error - Unable to aaaaaaaa storage for variable bbbbbbbb.
ISPYV303
Invalid variable name - Variable name aaaaaaaa is syntactically incorrect.
ISPYV304
Invalid function request - Request aaaaaaaa is undefined.
ISPYV305
Invalid pool name - Variable pool aaaaaaaa is undefined.
ISPYV306
Invalid hex data - Variable (aaaaaaaa) value (bbbbbbbb).
ISPYV307
End quote missing - Variable (aaaaaaaa) value (bbbbbbbb).
ISPYX001
Test severe error - Details precede this message in the ISPF log.
ISPYX002
Recursive Dialog Test - Dialog Test may only be entered once in each screen.
ISPYX200
Dialog trace ----------- - Application(aaaaaaaa.) Function(bbbbbbbb.) Screen(cccccccc.)
ISPYX201
aaaaaaaa bbbbbbbb cccccccc;cccccccc;cccccccc; dddddddd - eeeeeeee
ISPYX202
aaaaaaaa
ISPYX203
..Return code (aaaaaaaa.) - bbbbbbbb
ISPYX211
aaaaaaaa Pool (bbbbbbbb.) cccccccc - dddddddd
ISPYX212
..aaaaaaaa by bbbbbbbb - cccccccc
ISPYX213
..aaaaaaaa - bbbbbbbb
ISPYX301
aaaaaaaa failed - bbbbbbbb returned return code cccccccc. Request (dddddddd).
ISPYX302
aaaaaaaa failed - bbbbbbbb returned return code cccccccc. Request (Get test common area).
ISPYX321
Dialog Test recursion - Invocation of the Dialog Test option may not occur while in that option.
ISPYX322
Not in Dialog Test - The Dialog Test option must be used to select a Test suboption.
ISPYX323
Not in Test mode - A Dialog Test suboption may not be selected in user mode.
ISPYX351
Internal test error - Invalid test chain manager aaaaaaaa request bbbbbbbb.
ISPYX352
Internal test error - Unable to free test chain aaaaaaaa.
ISPYX353
Internal test error - Unable to get block for test chain aaaaaaaa.
ISPYX361
Internal test error - Invalid test trace routine caller aaaaaaaa.
ISPYX371
Internal test error - Invalid test main routine caller aaaaaaaa.
ISPYX381
Internal test error - Invalid test environment manager request aaaaaaaa.
ISPYX401
aaaaaaaa has no effect - Select an option and press the Enter key to leave this panel.
ISPZ000
aaaaaaaa - bbbbbbbb
ISPZ001
Invalid command - aaaaaaaa is undefined.
ISPZ002
Invalid command - aaaaaaaa bbbbbbbb is undefined.
ISPZZ100
Row aaaaaaaa of bbbbbbbb
ISPZZ101
aaaaaaaa
ISPZZ102
Row aaaaaaaa to bbbbbbbb of cccccccc
ISPZZ103
Row aaaaaaaa from bbbbbbbb