Broadcom (LSI) MegaRAID 9361-8i SAS3 Controller with 8 internal ports (2 GB Cache) PCIe3.0 x8 with cables (FC EKAH and EKEH)
Learn about the specifications and operating system requirements for feature code (FC) EKAH and EKEH adapters.
Overview
FC EKAH and EKEH are both the same adapter with different feature codes. FC EKAH is only supported on 8001-12C and does not include cables. FC EKEH, alternatively, is only supported on 8001-22C and includes cables.
Specifications
- Item
- Description
- Adapter FRU number
- FC EKAH: 01EM632 (AOC-K-9361-8I2S-IB001) (Designed to comply with RoHS requirement)
- FC EKEH: 01EM637 (AOC-K-9361-8I2B-IB001) (Designed to comply with RoHS requirement)
- I/O bus architecture
- PCIe3 x8
- Slot requirement
- For details about slot priorities and placement rules, see PCIe adapter placement rules and slot priorities and select the system you are working on.
- Supported Systems
- POWER8 processor-based systems
- 8001-12C and 8001-22C
- Voltage
- 3.3 V, 12 V
- Form factor
- Short, low-profile
- Maximum number
- For details about the maximum number of adapters that are supported, see PCIe adapter placement rules and slot priorities and select the system you are working on.
- Attributes provided
- Port independent auto-negotiation
- Automatically negotiates PCIe link widths
- Supports 1.5, 3.0, 6.0 and 12 Gb/s SAS and SATA data transfer rates
- Advanced array configuration and management utilities
- Cables
- Attach any necessary cables to the add-on card.
SAS-3 Integrated RAID Configuration Utility (SAS3IRCU) User Guide
Before you set up the adapter in JBOD mode, you must have the SAS-3 Integrated RAID Configuration Utility (SAS3IRCU) installed. For more information about SAS3IRCU, see the SAS-3 Integrated RAID Configuration Utility (SAS3IRCU) User Guide.
Operating system or partition requirements
If you are installing a new feature, ensure that you have the software that is required to support the new feature and that you determine whether any prerequisites must be met for this feature and attaching devices. To check for the prerequisites, see IBM® Prerequisite website.
- Linux
- Red Hat Enterprise Linux 7.2, little-endian, for Power, or later
- Ubuntu 16.04.1, or later
- Ubuntu 14.04.5, or later
- For support details, see the Linux Alert website.
- The latest version of the device driver or iprutils can be downloaded from the IBM Service and Productivity Tools website.
- The latest version of enabling libraries and utilities may be downloaded from Fix Central.